[U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx

Paulraj, Sandeep s-paulraj at ti.com
Tue Sep 8 21:20:29 CEST 2009


Jc,

Did you read what I wrote below the --- line in the patch itself?

Wolfgang wants to get rid of these references. He expressed this some time back.
If he decides to get rid of this file altogether this will lead to compilation failures.

Thanks,
Sandeep

________________________________
From: jcwren at gmail.com [mailto:jcwren at gmail.com] On Behalf Of J.C. Wren
Sent: Tuesday, September 08, 2009 3:15 PM
To: Tom
Cc: Paulraj, Sandeep; u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx

Why is this change being made at all?  Seems a lot more awkward to define (1 << 20) than SZ_1MB.  SZ_1MB reads a lot easier.

--jc
On Tue, Sep 8, 2009 at 3:09 PM, Tom <Tom.Rix at windriver.com<mailto:Tom.Rix at windriver.com>> wrote:
Paulraj, Sandeep wrote:
>
>> -----Original Message-----
>> From: Wolfgang Denk [mailto:wd at denx.de<mailto:wd at denx.de>]
>> Sent: Tuesday, September 08, 2009 2:51 PM
>> To: Paulraj, Sandeep
>> Cc: u-boot at lists.denx.de<mailto:u-boot at lists.denx.de>
>> Subject: Re: [U-Boot] [PATCH] TI DaVinci: Remove references to SZ_xx
>>
>> Dear s-paulraj at ti.com<mailto:s-paulraj at ti.com>,
>>
>> In message <1252434246-19517-1-git-send-email-s-paulraj at ti.com<mailto:1252434246-19517-1-git-send-email-s-paulraj at ti.com>> you wrote:
>>> From: Sandeep Paulraj <s-paulraj at ti.com<mailto:s-paulraj at ti.com>>
>>>
>>> This patch removes the asm/sizes.h header file from being
>>> included in the DaVinci SOC configs.
>>> References to SZ_xx have been replaced by appropriate
>>> bit shifted values.
>>>
>>> Signed-off-by: Sandeep Paulraj <s-paulraj at ti.com<mailto:s-paulraj at ti.com>>
>> Note that this patch actually changes the configuration:
>>
>>> --- a/include/configs/davinci_dm355evm.h
>>> +++ b/include/configs/davinci_dm355evm.h
>> ...
>>>  /* U-Boot memory configuration */
>>> -#define CONFIG_STACKSIZE           SZ_256K         /* regular stack */
>>> -#define CONFIG_SYS_MALLOC_LEN              SZ_512K         /* malloc()
>> arena */
>>> +#define CONFIG_STACKSIZE           (256 << 10)     /* 256 KiB */
>>> +#define CONFIG_SYS_MALLOC_LEN              (1 << 20)       /* 1 MiB*/
>> as it increases the malloc() arena size form 512 to 1024 KiB.
>>
>> Assuming this was done intentionally:
> [Sandeep] Yes this was intentional because for NANDs with large block sizes(256 KiB), if this is not increased we will get "out of memory" errors.
>> Acked-by: Wolfgang Denk <wd at denx.de<mailto:wd at denx.de>>
>>
Then this change needs to be a separate patch.

Nak Tom
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de<mailto:U-Boot at lists.denx.de>
http://lists.denx.de/mailman/listinfo/u-boot



More information about the U-Boot mailing list