[U-Boot] [PATCH v2] Support for the OpenRD base board

Simon Kagstrom simon.kagstrom at netinsight.net
Fri Sep 11 15:52:16 CEST 2009


On Fri, 11 Sep 2009 06:33:44 -0700
Prafulla Wadaskar <prafulla at marvell.com> wrote:

> > > > +#define CONFIG_ENV_SIZE                      0x20000 /* 128k */
> > > > +#define CONFIG_ENV_ADDR                      0xa0000
> > > > +#define CONFIG_ENV_OFFSET            0xa0000 /* env 
> > starts here */
> > > Do you really need this address? the u-boot binary is 
> > within 256kb, at the most it can go till 512kb
> > 
> > This is where the default environment (for the U-boot shipped by
> > Marvell) resides. Like on Sheevaplug, it uses 4-bit ECC, so current
> > U-boot won't be able to read it, but I know you're working on it.
> So I think, you want to retain both environment variables untouched
>  ( i.e. latest u-boot and u-boot shipped by Marvell)
> But so far as mainlined u-boot is considered,
> doesn't it make sense to pack uboot-bin and environment sector together?
> like sheevaplug, I think first 2 sectors for u-boot and next once sector for env should be better to choose.

Right, makes sense. I'll update that and skip the current address.

> > > > +#define MTDIDS_DEFAULT               "nand0=nand_mtd"
> > > > +#define MTDPARTS_DEFAULT
> > > > "mtdparts=nand_mtd:0x100000 at 0x000000(uboot),0x400000 at 0x100000(
> > > > uImage),"\
> > > > +     "0x1fb00000 at 0x500000(rootfs)"
>
> > I don't quite understand this. This is also the default addresses
> > shipped with the board.

> W..r.to line 24 at http://git.marvell.com/?p=orion.git;a=blob;f=arch/arm/mach-kirkwood/openrd_base-setup.c;h=947dfb8cd5b252bf326d691ee5179e29ad07a9a9;hb=HEAD
> By default kernel has same mdtpart configuration as you are describing here.
> So you don't need this default setup here, you should skip it

OK, I understand. However, but it might also be useful from U-boot.
Locally, I've loaded the kernel from the ubifs partition, and then it's
useful to have this defined in U-boot as well. If it shouldn't be there
by default, I'll remove it though.

// Simon


More information about the U-Boot mailing list