[U-Boot] Please pull u-boot-mpc85xx

[Wolfgang Denk]

Dear Kumar Gala,

In message <Pine.LNX.4.64.0909221206300.5780 at localhost.localdomain> you wrote:
> The following changes since commit 3b6a9267f0de7b85d387fa4123d0b58379363447:
>   Wolfgang Denk (1):
>         board/flagadm/flash.c: fix compile warning
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-mpc85xx.git master
> 
> Kumar Gala (15):
>       ppc/85xx: Fix LCRR_CLKDIV defines
>       ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DS
>       ppc/85xx: Simplify the top makefile for 36-bit config for P2020DS
>       ppc/85xx: Simplify the top makefile for P1_P2_RDB boards
>       ppc/85xx: Clean up p1_p2_rdb PCI setup
>       ppc/85xx: Clean up p2020ds PCI setup code
>       ppc/85xx: Clean up mpc8572DS PCI setup code
>       ppc/85xx: Clean up use of LAWAR defines
>       ppc/p4080: Add p4080 platform immap definitions
>       ppc/p4080: Add support for CoreNet style platform LAWs
>       ppc/p4080: CoreNet platfrom style CCSRBAR setting
>       ppc/p4080: CoreNet platfrom style secondary core release
>       ppc/p4080: Add various p4080 related defines (and p4040)
>       ppc/p4080: Handle timebase enabling and frequency reporting
>       ppc/p4080: Determine various chip frequencies on CoreNet platforms
> 
> Mingkai Hu (4):
>       ppc/85xx: simplify the top makefile for 36-bit config for mpc8536ds
>       ppc/85xx: add ld script file for boot from NAND
>       immap_85xx: add porpllsr's plat ratio definition
>       ppc/85xx: add cpu init config file for boot from NAND
> 
> Paul Gortmaker (12):
>       sbc8548: replace README with completely new document
>       sbc8548: enable use of PCI network cards
>       sbc8548: delete unused MPC8548CDS info carried over from port
>       sbc8548: get_clock_freq is not valid for this board
>       sbc8548: enable access to second bank of flash
>       sbc8548: remove eTSEC3/4 voltage hack
>       sbc8548: use I/O accessors
>       sbc8548: correct local bus SDRAM size from 64M to 128M
>       fsl_pci: create a SET_STD_PCI_INFO() helper wrapper
>       sbc8548: update PCI/PCI-e support code
>       sbc8548: allow enabling PCI via a make config option
>       sbc85x0: tidy up Makefile to use new configuration script.
> 
> Peter Tyser (1):
>       mpc8610hpcd: Use common 86xx fdt fixup code
> 
> Poonam Aggrwal (1):
>       ppc/85xx: 32bit DDR changes for P1020/P1011
> 
> Vivek Mahajan (1):
>       85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQ

There have been a few changes requested to some of these patches. I
guess you will send an updated pull request when this has been cleaned
up?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
We're all sorry for the other guy when he loses his job to a machine.
But when it comes to your job -- that's different. And it always will
be different.
	-- McCoy, "The Ultimate Computer", stardate 4729.4