[U-Boot] HP Jornada 720 flashrom
Kristoffer Ericson
kristoffer.ericson at gmail.com
Thu Sep 3 13:09:19 CEST 2009
Still having trouble finding exactly what is causing it.
See below for my include/configs/jornada.h file.
diff --git a/include/configs/jornada.h b/include/configs/jornada.h
new file mode 100644
index 0000000..270b54f
--- /dev/null
+++ b/include/configs/jornada.h
@@ -0,0 +1,166 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger at sysgo.de>
+ *
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * Configuation settings for the Intel Assabet board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_SA1110 1 /* This is an SA1100 CPU */
+#define CONFIG_JORNADA700 1 /* on an HP Jornada 700 */
+
+#undef CONFIG_USE_IRQ
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size rsrvd for initial data */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SA1100_SERIAL
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on HP Jornada */
+#define CONFIG_SERIAL3 1 /* needed? */
+
+/* allow to overwrite serial and ethaddr */
+//#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 59600
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+//#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+//#define CONFIG_BOOTP_SUBNETMASK
+//#define CONFIG_BOOTP_GATEWAY
+//#define CONFIG_BOOTP_HOSTNAME
+//#define CONFIG_BOOTP_BOOTPATH
+
+#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTARGS "console=ttySA0,115200n8"
+#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
+//#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 59600 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "HP Jornada # " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
+
+#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */
+
+#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CONFIG_SYS_CPUSPEED 0x0a /* set core clock to 206MHz */
+
+ /* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
+#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
+
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
+#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
+#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
+
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */
+
+#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_RAMSTART
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_SIZE
+#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */
+#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
+#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
+#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max # of sectors on one chip */
+#undef CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+
+#define CONFIG_ENV_IS_IN_FLASH 1
+
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+#define CONFIG_ENV_IN_OWN_SECTOR 1
+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
+#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
+#endif
+
+#endif /* __CONFIG_H */
On Wed, 02 Sep 2009 23:37:47 +0200
Wolfgang Denk <wd at denx.de> wrote:
> Dear Kristoffer Ericson,
>
> In message <20090902233329.a9b77e68.kristoffer.ericson at gmail.com> you wrote:
> > Greetings,
> >
> > Trying to get my Flashrom working (previously used blob with it).
> > I get this now :
> > c -Map u-boot.map -o u-boot
> > net/libnet.a(net.o)(.text+0x1cc): In function `ArpRequest':
> > /home/kristoffer/work/projects/u-boot.git/net/net.c:250: undefined reference to `eth_send'
> ...
> > My device shouldnt be using those at all so its no wonder that they are undefined, but
> > the question is how I should get rid of those messages.
>
> Don't enable network support in your board configuration? I. e. remove
> all command selections that require Ethenret to work...
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> Substitute "damn" every time you're inclined to write "very"; your
> editor will delete it and the writing will be just as it should be.
> - Mark Twain
--
Kristoffer Ericson <kristoffer.ericson at gmail.com>
More information about the U-Boot
mailing list