[U-Boot] [PATCH] OMAP3: Update Overo and Beagle environment

Steve Sakoman sakoman at gmail.com
Sun Sep 27 16:02:28 CEST 2009


On Sun, Sep 27, 2009 at 4:52 AM, Tom <Tom.Rix at windriver.com> wrote:
> Steve Sakoman wrote:
>>
>> On Fri, Sep 25, 2009 at 1:47 PM, Tom <Tom.Rix at windriver.com> wrote:
>>>
>>> Dirk Behme wrote:
>>>>
>>>> From: Steve Sakoman <sakoman at gmail.com>
>>>>
>>>> Update default environment to support new kernel DSS2 subsystem and
>>>> simplify rootfs type and location changes.
>>>>
>>>> Signed-off-by: Steve Sakoman <sakoman at gmail.com>
>>>> Signed-off-by: Dirk Behme <dirk.behme at googlemail.com>
>>>>
>>>> ---
>>>>  include/configs/omap3_beagle.h |   27 +++++++++++++++++++--------
>>>>  include/configs/omap3_overo.h  |   27 +++++++++++++++++++--------
>>>>  2 files changed, 38 insertions(+), 16 deletions(-)
>>>>
>>>> Index: u-boot-ti/include/configs/omap3_overo.h
>>>> ===================================================================
>>>> --- u-boot-ti.orig/include/configs/omap3_overo.h
>>>> +++ u-boot-ti/include/configs/omap3_overo.h
>>>> @@ -155,16 +155,27 @@
>>>>  #define CONFIG_EXTRA_ENV_SETTINGS \
>>>>      "loadaddr=0x82000000\0" \
>>>>      "console=ttyS2,115200n8\0" \
>>>> -     "videomode=1024x768 at 60,vxres=1024,vyres=768\0" \
>>>> -     "videospec=omapfb:vram:2M,vram:4M\0" \
>>>> +     "vram=12M\0" \
>>>> +     "dvimode=1024x768MR-16 at 60\0" \
>>>> +     "defaultdisplay=dvi\0" \
>>>> +     "mmcroot=/dev/mmcblk0p2 rw\0" \
>>>> +     "mmcrootfstype=ext3 rootwait\0" \
>>>> +     "nandroot=/dev/mtdblock4 rw\0" \
>>>> +     "nandrootfstype=jffs2\0" \
>>>>      "mmcargs=setenv bootargs console=${console} " \
>>>> -             "video=${videospec},mode:${videomode} " \
>>>> -             "root=/dev/mmcblk0p2 rw " \
>>>> -             "rootfstype=ext3 rootwait\0" \
>>>> +             "vram=${vram} " \
>>>> +             "omapfb.mode=dvi:${dvimode} " \
>>>> +             "omapfb.debug=y " \
>>>
>>> Is setting the debug option needed ?
>>> This would seem useful (from the name) only to developers
>>
>> DSS2 is still under active development.  This setting makes user
>> support easier since boot logs contain needed debug info.
>>
>
> Or it turns them all into beta-testers.
> It is a toss up if this is a good thing
> I will go with it.
> OK.

Heh, like it or not we are all beta testing DSS2!  It is so much
better than the old DSS code that I want to do everything possible to
help Tomi get it accepted upstream as quickly as possible :-)

>>>> +             "omapdss.def_disp=${defaultdisplay} " \
>>>> +             "root=${mmcroot} " \
>>>> +             "rootfstype=${mmcrootfstype}\0" \
>>>>      "nandargs=setenv bootargs console=${console} " \
>>>> -             "video=${videospec},mode:${videomode} " \
>>>> -             "root=/dev/mtdblock4 rw " \
>>>> -             "rootfstype=jffs2\0" \
>>>> +             "vram=${vram} " \
>>>> +             "omapfb.mode=dvi:${dvimode} " \
>>>> +             "omapfb.debug=y " \
>>>> +             "omapdss.def_disp=${defaultdisplay} " \
>>>
>>>  From vram to omapdss.def_disp are common for nand and mmc.
>>> These should be changed to something like
>>>
>>> "videoargs= .... "
>>>
>>> Similar for beagle.
>>
>> I'm not sure exactly what you are suggesting.  The current setup is
>> tailored to make user support easier.
>>
>> If someone wants to use the 4.3" LCD display option, you tell them to
>> simply type:
>>
>> setenv defaultdisplay=lcd43
>> saveenv
>>
> Yes I see how just a single video_args= would not give you this flexiblity.
> A lesser way to do this would be to that you may want to do is
> video_args="${defaultdisplay} ${dvimode}  ..  "

I agree that would be nice, and in fact that is the way I did it
initially.  But for some reason it didn't work.  I didn't spend a lot
of time investigating, but it seemed that there was a limit to how
many "layers" of variable definitions you could have.  I won't rule
out operator error though!

Steve

>
> Tom
>
>


More information about the U-Boot mailing list