[U-Boot] Compile for SPARC Leon3 fails with *** No rule to make target ... ***

[Сергей Миронов]

Hi! Read carefullly your config file!
I've working with same things (Gaisler+Leon3+Gcc-4.3.3) on board
ML-402. My config compiles without problem, so i suggest that makefile
is good.

2009/9/16 Kraitschy, Tobias <tobias.kraitschy at siemens.com>:
> Hi all,
>
> I`ve implemented Gaisler Research`s Leon3 SPARC core to a FPGA evaluation board of Actel. Now I`m about to get U-Boot running. So I made up my own board directory, added header files with my configuration-parameters etc. just as discribed in the u-boot README.
> The "make myboard_config" goes well, but "make all" fails with the following message.
>
> make[1]: *** No rule to make target `/u-boot-2009.08_build/cpu/leon3/start.S', needed by `/u-boot-2009.08_build/cpu/leon3/start.o'.  Stop.
>
> I´d like to add that I set "BUILD_DIR=`/u-boot-2009.08_build" and I am using Gaisler`s Bare Cross Compiler with GCC 3.4.4. Searching the mailing-list-archives brought no advice to me. I also tried to study the Makefiles for half a week now, but I´m not familiar enought with it.
>
> Thanks for your help!
>
> Best regards,
>
> Tobias Kraitschy
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
>



-- 
С Уважением,
Сергей.