[U-Boot] LCRR setting on XPEDITE5370 & XPEDITE5200

[Peter Tyser]

Hi Kumar,

> I see you guys set LCRR in the config.h.  You are using  
> LCRR_CLKDIV_4.  Do you think this means clk/4?  (I ask because the  
> defines aren't correct, and wasn't sure about your expectation).

I faintly remember punching the numbers for LCRR a while back, then
blindly replacing the calculated LCRR value with the LCRR_* defines from
fsl_lbc.h.  So clk/8 is intended, but I didn't register that
LCRR_CLKDIV_4 was a misnomer at the time.

Thanks for checking, I'll send a patch when I have some free time unless
someone beats me to it.

Peter