[U-Boot] Xilinx LL temac update

[Michal Simek]

ping

Michal Simek wrote:
> Hi Ben,
> Ben Warren wrote:
>> Hi Michal,
>>
>> monstr at monstr.eu wrote:
>>> Hi Ben,
>>>
>>> I updated LL-temac driver - all fixes are there.
>>> Ad to your point Microblaze uses only one ethernet core. It is possible
>>> to use a lot of IPs but I don't have board like this to test it that's
>>> why I don't want change it.
>>>   
>> If it's possible, somebody will do it.  You don't need to have a board
>> with more than one to test that it works, just create the data
>> structures to encapsulate data that's specific to each instance, such as
>> base address etc.  Look at the new CS8900 driver or SMC911X for examples
>> of how to do this
> 
> If someone do it, then have to change that driver. I understand your opinion
> but I don't need it now and it is paid IP core. It need more changes.
> There is necessary change FIFO mode and phy handling + more changes in BSP
> which generate parameters from HW design. It is necessary to do more complex changes.
> I'll do that changes when phy lib is ready.
> 
> If you can, please add it to your net tree.
> 
> Thanks,
> Michal
> 
> 
> 
> 
>>> If you find any other problem please let me know. If is OK - I'll create
>>> net branch with these changes (LL_TEMAC/Emaclite + removing old Emac
>>> driver)
>>>
>>>   
>> You won't need to do that.  I'll put it  in the main net tree.
>>> Thanks,
>>> Michal
>>>
>>>
>>>   
>> regards,
>> Ben
> 
> 

-- 
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian