[U-Boot] [PATCH 7/8] sbc8548: allow enabling PCI via a make config option

[Kumar Gala]

On Sep 18, 2009, at 6:08 PM, Paul Gortmaker wrote:

> Prior to this commit, to enable PCI, you had to go manually
> edit the board config header, and if you had 33MHz PCI, you
> had to manually change CONFIG_SYS_NS16550_CLK too, which was
> not real user friendly,
>
> This adds the typical PCI and clock speed make targets to the
> toplevel Makefile in accordance with what is being done with
> other boards.
>
> Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
> ---
> MAKEALL                   |    4 ++++
> Makefile                  |   26 ++++++++++++++++++++++++--
> include/configs/sbc8548.h |   13 ++++++++-----
> 3 files changed, 36 insertions(+), 7 deletions(-)
>
> diff --git a/MAKEALL b/MAKEALL
> index 1d50c34..b394adb 100755
> --- a/MAKEALL
> +++ b/MAKEALL
> @@ -399,6 +399,10 @@ LIST_85xx="		\
> 	PM856		\
> 	sbc8540		\
> 	sbc8548		\
> +	sbc8548_PCI_33	\
> +	sbc8548_PCI_66	\
> +	sbc8548_PCI_33_PCIE \
> +	sbc8548_PCI_66_PCIE \
> 	sbc8560		\
> 	socrates	\
> 	stxgp3		\
> diff --git a/Makefile b/Makefile
> index 0b61d05..28b20af 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -2570,8 +2570,30 @@ sbc8540_66_config:	unconfig
> 	fi
> 	@$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
>
> -sbc8548_config:		unconfig
> -	@$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
> +sbc8548_config \
> +sbc8548_PCI_33_config \
> +sbc8548_PCI_66_config \
> +sbc8548_PCI_33_PCIE_config \
> +sbc8548_PCI_66_PCIE_config: unconfig
> +	@mkdir -p $(obj)include

Use the new -t option to mkconfig:

commit 804d83a563c47b55e1f14f5de3b6e9d7e2a7ef5e
Author: Wolfgang Denk <wd at denx.de>
Date:   Tue Sep 15 22:12:31 2009 +0200

     mkconfig: split the board make target to multiple config targets

     To simplify the top level makefile it useful to be able to parse
     the top level makefile target to multiple individual target, then
     put them to the config.h, leave the board config file to handle
     the different targets.

     Note that this method uses the '_'(underline) as the delimiter when
     splits the board make target.

     Signed-off-by: Mingkai Hu <Mingkai.hu at freescale.com>

     This also reverts commit 511c02f611cb5afa1b8ca5980caaaabaa0de377f.

     Signed-off-by: Wolfgang Denk <wd at denx.de>

- k