[U-Boot] kirkwood (openrd): saveenv will not work with environment in NAND

[Dieter Kiermaier]

Hi everybody,

I try to bring up fw_setenv / fw_printenv in linux kernel but first it want to start with u-boot itself.
I built most recent u-boot-marvell git source and get a running u-boot with standard openrd configuration.
So far so good.

version says:
ArtistaNET-III>> version

U-Boot 2009.08-00208-g9ef0569-dirty (Sep 29 2009 - 15:42:42)
OpenRD_base


But saveenv will not work as expected. setenv of new parameter will work but after saveenv and reboot
the new parameter is lost and u-boot complains about wrong CRC again.

Any help would be very appreciated.

Dieter