[U-Boot] [PATCH 7/7] ppc/p4080: Determine various chip frequencies on CoreNet platforms
Kumar Gala
galak at kernel.crashing.org
Fri Sep 18 22:59:55 CEST 2009
The means to determine the core, bus, and DDR frequencies are completely
new on CoreNet style platforms. Additionally on p4080 we can have
different frequencies for FMAN and PME IP blocks. We need to keep track
of the FMAN & PME frequencies since they are used for time stamping
capabilities inside each block.
Signed-off-by: Kumar Gala <galak at kernel.crashing.org>
---
cpu/mpc85xx/cpu.c | 29 +++++++++++++++++
cpu/mpc85xx/speed.c | 85 +++++++++++++++++++++++++++++++++++++++++++++++++++
include/e500.h | 6 +++
3 files changed, 120 insertions(+), 0 deletions(-)
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 25c0416..1c0f2b2 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -46,11 +46,20 @@ int checkcpu (void)
char buf1[32], buf2[32];
#ifdef CONFIG_DDR_CLK_FREQ
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_CORENET
+ u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+ >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#else
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
+#endif
+#else
+#ifdef CONFIG_FSL_CORENET
+ u32 ddr_sync = 0;
#else
u32 ddr_ratio = 0;
#endif
+#endif
int i;
svr = get_svr();
@@ -111,6 +120,16 @@ int checkcpu (void)
}
printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
+#ifdef CONFIG_FSL_CORENET
+ if (ddr_sync == 1)
+ printf(" DDR:%-4s MHz (%s MT/s data rate) (Synchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+ else
+ printf(" DDR:%-4s MHz (%s MT/s data rate) (Asynchronous), ",
+ strmhz(buf1, sysinfo.freqDDRBus/2),
+ strmhz(buf2, sysinfo.freqDDRBus));
+#else
switch (ddr_ratio) {
case 0x0:
printf(" DDR:%-4s MHz (%s MT/s data rate), ",
@@ -128,6 +147,7 @@ int checkcpu (void)
strmhz(buf2, sysinfo.freqDDRBus));
break;
}
+#endif
if (sysinfo.freqLocalBus > LCRR_CLKDIV)
printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
@@ -143,6 +163,15 @@ int checkcpu (void)
printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
#endif
+#ifdef CONFIG_SYS_DPAA_FMAN
+ for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++)
+ printf(" FMAN%d: %s MHz\n", i, strmhz(buf1, sysinfo.freqFMan[i]));
+#endif
+
+#ifdef CONFIG_SYS_DPAA_PME
+ printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
+#endif
+
puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
return 0;
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index 2fdcefb..dc18798 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -1,5 +1,6 @@
/*
* Copyright 2004, 2007-2009 Freescale Semiconductor, Inc.
+ *
* (C) Copyright 2003 Motorola Inc.
* Xianghua Xiao, (X.Xiao at motorola.com)
*
@@ -37,6 +38,89 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info (sys_info_t * sysInfo)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_CORENET
+ volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
+
+ const u8 core_cplx_PLL[16] = {
+ [ 0] = 0, /* CC1 PPL / 1 */
+ [ 1] = 0, /* CC1 PPL / 2 */
+ [ 2] = 0, /* CC1 PPL / 4 */
+ [ 4] = 1, /* CC2 PPL / 1 */
+ [ 5] = 1, /* CC2 PPL / 2 */
+ [ 6] = 1, /* CC2 PPL / 4 */
+ [ 8] = 2, /* CC3 PPL / 1 */
+ [ 9] = 2, /* CC3 PPL / 2 */
+ [10] = 2, /* CC3 PPL / 4 */
+ [12] = 3, /* CC4 PPL / 1 */
+ [13] = 3, /* CC4 PPL / 2 */
+ [14] = 3, /* CC4 PPL / 4 */
+ };
+
+ const u8 core_cplx_PLL_div[16] = {
+ [ 0] = 1, /* CC1 PPL / 1 */
+ [ 1] = 2, /* CC1 PPL / 2 */
+ [ 2] = 4, /* CC1 PPL / 4 */
+ [ 4] = 1, /* CC2 PPL / 1 */
+ [ 5] = 2, /* CC2 PPL / 2 */
+ [ 6] = 4, /* CC2 PPL / 4 */
+ [ 8] = 1, /* CC3 PPL / 1 */
+ [ 9] = 2, /* CC3 PPL / 2 */
+ [10] = 4, /* CC3 PPL / 4 */
+ [12] = 1, /* CC4 PPL / 1 */
+ [13] = 2, /* CC4 PPL / 2 */
+ [14] = 4, /* CC4 PPL / 4 */
+ };
+ uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
+ unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+
+ sysInfo->freqSystemBus = sysclk;
+ sysInfo->freqDDRBus = sysclk;
+ freqCC_PLL[0] = sysclk;
+ freqCC_PLL[1] = sysclk;
+ freqCC_PLL[2] = sysclk;
+ freqCC_PLL[3] = sysclk;
+
+ sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0xf;
+ sysInfo->freqDDRBus *= ((in_be32(&gur->rcwsr[0]) >> 17) & 0xf);
+ freqCC_PLL[0] *= (in_be32(&clk->pllc1gsr) >> 1) & 0x3f;
+ freqCC_PLL[1] *= (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
+ freqCC_PLL[2] *= (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
+ freqCC_PLL[3] *= (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
+
+ rcw_tmp = in_be32(&gur->rcwsr[3]);
+ for (i = 0; i < cpu_numcores(); i++) {
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + i*8) >> 27) & 0xf;
+ u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+
+ sysInfo->freqProcessor[i] = freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+ }
+
+#define PME_CLK_SEL 0x80000000
+#define FM1_CLK_SEL 0x40000000
+#define FM2_CLK_SEL 0x20000000
+ rcw_tmp = in_be32(&gur->rcwsr[7]);
+
+#ifdef CONFIG_SYS_DPAA_PME
+ if (rcw_tmp & PME_CLK_SEL)
+ sysInfo->freqPME = freqCC_PLL[2] / 2;
+ else
+ sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ if (rcw_tmp & FM1_CLK_SEL)
+ sysInfo->freqFMan[0] = freqCC_PLL[2] / 2;
+ else
+ sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+#if (CONFIG_SYS_NUM_FMAN) == 2
+ if (rcw_tmp & FM2_CLK_SEL)
+ sysInfo->freqFMan[1] = freqCC_PLL[2] / 2;
+ else
+ sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+#endif
+#endif
+
+#else
uint plat_ratio,e500_ratio,half_freqSystemBus;
uint lcrr_div;
int i;
@@ -67,6 +151,7 @@ void get_sys_info (sys_info_t * sysInfo)
sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
}
#endif
+#endif
#ifdef CONFIG_QE
qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
diff --git a/include/e500.h b/include/e500.h
index f8c8266..e1708b9 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -15,6 +15,12 @@ typedef struct
unsigned long freqDDRBus;
unsigned long freqLocalBus;
unsigned long freqQE;
+#ifdef CONFIG_SYS_DPAA_FMAN
+ unsigned long freqFMan[CONFIG_SYS_NUM_FMAN];
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+ unsigned long freqPME;
+#endif
} MPC85xx_SYS_INFO;
#endif /* _ASMLANGUAGE */
--
1.6.0.6
More information about the U-Boot
mailing list