[U-Boot] [U-boot] Marvell Pull Request

Prafulla Wadaskar prafulla at marvell.com
Wed Sep 23 08:13:31 CEST 2009


 

> -----Original Message-----
> From: Tom [mailto:Tom.Rix at windriver.com] 
> Sent: Tuesday, September 22, 2009 6:50 PM
> To: Prafulla Wadaskar
> Cc: U-Boot; Paulraj, Sandeep; Minkyu Kang; Wolfgang Denk
> Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
> 
> Prafulla Wadaskar wrote:
> >  
> > 
> >> -----Original Message-----
> >> From: Tom [mailto:Tom.Rix at windriver.com] 
> >> Sent: Tuesday, September 22, 2009 12:46 AM
> >> To: Prafulla Wadaskar
> >> Cc: U-Boot
> >> Subject: Re: [U-Boot] [U-boot] Marvell Pull Request
> >>
> >> Prafulla Wadaskar wrote:
> >>> Hi Wolfgang
> >>>
> >>> Please pull
> >> Shouldn't this rather get pulled to u-boot-arm?
> >> Tom
> > 
> > Hi Tom,
> > Yes :-) you are right.
> > I was bit biased since u-boot-marvell.git was cloned from u-boot.git
> > Shall I generate new email pull request? Or
> > Can you please kindly pull it to u-boot-arm?
> 
> I would like to set up a process where I just cherry picked 
> your changes
> directly from marvell/master.
> 
> Comparing marvell/master to arm/next
> 
> git cherry t-next
> + ceb2d57c2205db5bbd868577f756c74a2568160c
> + 95a4a593b577b6e2f1da2d4b0f5ec86975c33413
> + 84a45d33c2cc261dbd5411f7c2ad45f6003025b6
> + e67af44d0167d8237dd2c2ddf8e301d19ca12914
> + 0413cfecea350000eab5e591a0965c3e3ee0ff00
> + 3b6a9267f0de7b85d387fa4123d0b58379363447
> + ffed6c85ce591cd93e28190153fec421c3b2499c <- pick me
> + c928c19b2563e4977adc0570d06c900ac1e7788c <- pick me
> + 9ef0569a3c8b0d2458bdbce21a5370807e13e20a <- pick me
> 
> The others look like they came from u-boot/master
> 
> It would be helpful but not required if you merged against 
> arm/master or 
> arm/next instead of u-boot/master.

I think this makes more sense to merge it from arm/master, I will do that, I am thinking of creating a branch "arm" instead of disturbing master, what do you think?

> 
> If I can assume what is good in marvell/master, we do not need
> for you go through the asking for a pulls, they will just happen
> when I have time, likely over the weekend.

If I have clean changes in lined with arm/master, then why not to pull?

> 
> These changes will accumulate in arm/next.

If this is clear from you that Changes will be accumulated in arm/next then I must rebase a branch on u-boot-marvell.git with arm/next.

> Less frequently I will merge these to arm/master.
> This will happen once you and the other arm maintainers have
> given then the ok.  I was thinking that this could happen monthly
> but I am open for other suggestions.

I think monthly will be too long, may be wolfgang can comment better on this :-)

Regards..
Prafulla . .

> 
> Tom
> 
> > 
> > Regards..
> > Prafulla . .
> > 
> >>
> >>> The following changes since commit 
> >> 3b6a9267f0de7b85d387fa4123d0b58379363447:
> >>>   Wolfgang Denk (1):
> >>>         board/flagadm/flash.c: fix compile warning
> >>>
> >>> are available in the git repository at:
> >>>
> >>>   git://git.denx.de/u-boot-marvell.git master
> >>>
> >>> Prafulla Wadaskar (2):
> >>>       Kirkwood: rd6281a: Add kwbimage build support
> >>>       Kirkwood: mv88f6281gtw_ge: Add kwbimage build support
> >>>
> >>> Simon Kagstrom (1):
> >>>       Support for the OpenRD base board
> >>>
> >>>  MAINTAINERS                                |    4 +
> >>>  MAKEALL                                    |    1 +
> >>>  Makefile                                   |    3 +
> >>>  board/Marvell/mv88f6281gtw_ge/config.mk    |    3 +
> >>>  board/Marvell/mv88f6281gtw_ge/kwbimage.cfg |  165 
> >> +++++++++++++++++++++
> >>>  board/Marvell/openrd_base/Makefile         |   56 +++++++
> >>>  board/Marvell/openrd_base/config.mk        |   33 ++++
> >>>  board/Marvell/openrd_base/kwbimage.cfg     |  168 
> >> +++++++++++++++++++++
> >>>  board/Marvell/openrd_base/openrd_base.c    |  160 
> >> ++++++++++++++++++++
> >>>  board/Marvell/openrd_base/openrd_base.h    |   46 ++++++
> >>>  board/Marvell/rd6281a/config.mk            |    3 +
> >>>  board/Marvell/rd6281a/kwbimage.cfg         |  167 
> >> +++++++++++++++++++++
> >>>  include/configs/openrd_base.h              |  220 
> >> ++++++++++++++++++++++++++++
> >>>  13 files changed, 1029 insertions(+), 0 deletions(-)
> >>>  create mode 100644 board/Marvell/mv88f6281gtw_ge/kwbimage.cfg
> >>>  create mode 100644 board/Marvell/openrd_base/Makefile
> >>>  create mode 100644 board/Marvell/openrd_base/config.mk
> >>>  create mode 100644 board/Marvell/openrd_base/kwbimage.cfg
> >>>  create mode 100644 board/Marvell/openrd_base/openrd_base.c
> >>>  create mode 100644 board/Marvell/openrd_base/openrd_base.h
> >>>  create mode 100644 board/Marvell/rd6281a/kwbimage.cfg
> >>>  create mode 100644 include/configs/openrd_base.h
> >>>
> >>> Regards..
> >>> Prafulla . . .
> >>> _______________________________________________
> >>> U-Boot mailing list
> >>> U-Boot at lists.denx.de
> >>> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 


More information about the U-Boot mailing list