[U-Boot] [PATCH 1/1] TI OMAP3 Use arm init sequence to initialize i2c

[Tom Rix]

This changes fixes an early i2c error.

It appears that I2C is working because once a read or write
error is detected, the omap24xx_i2c driver calls i2c_init
inside its error handling check.

While it is ok to attempt error handling this way, the boards
must not depend on this side effect to initialize it's i2c.

Instead of explicitly calling i2c_init for every board, use
the generic arm initialization in lib_arm/board.c. By defining
the config variable CONFIG_HARD_I2C, the omap3 i2c initialization
is included in the init_sequence table.

Run tested on Beagle.
Compile tested on the omap3's

Signed-off-by: Tom Rix <Tom.Rix at windriver.com>
---
 include/configs/devkit8000.h    |    1 +
 include/configs/omap3_beagle.h  |    1 +
 include/configs/omap3_evm.h     |    1 +
 include/configs/omap3_overo.h   |    1 +
 include/configs/omap3_pandora.h |    1 +
 include/configs/omap3_zoom1.h   |    1 +
 include/configs/omap3_zoom2.h   |    1 +
 7 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index cd40da6..a8ac786 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -98,6 +98,7 @@
 #define CONFIG_DOS_PARTITION		1
 
 /* I2C */
+#define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_SYS_I2C_BUS		0
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 61629f8..55eeb94 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -123,6 +123,7 @@
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_SYS_I2C_BUS		0
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 9f0f34b..72e9626 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -121,6 +121,7 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_SYS_I2C_BUS		0
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 6616b55..c4fd696 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -114,6 +114,7 @@
 
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_SYS_I2C_BUS		0
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index 1cfd7e9..064c0bc 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -112,6 +112,7 @@
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_SYS_I2C_BUS		0
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 61a41e7..b55b8f0 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -119,6 +119,7 @@
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_SYS_I2C_BUS		0
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 03f92f5..75ab980 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -140,6 +140,7 @@
 #undef CONFIG_CMD_NFS			/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
+#define CONFIG_HARD_I2C			1
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_SYS_I2C_BUS		0
-- 
1.6.0.6