[U-Boot] [PATCH] net: [V2] Add LL TEMAC driver to u-boot and move Emaclite to NET_MULTI
Michal Simek
monstr at monstr.eu
Tue Sep 15 08:23:34 CEST 2009
Hi Ben,
sorry for head quoting but this is V2.
In my net branch is V3 which has some fixes which you reported.
Anyway. You want to create two separate patches. I am ok with it.
I'll do it and let you know.
Thanks,
Michal
Ben Warren wrote:
> monstr at monstr.eu wrote:
>> From: Michal Simek <monstr at monstr.eu>
>>
>> Here are two major changes which should go together.
>> First is adding LL Temac driver to u-boot and the second
>> is changing Emaclite to NET_MULTI api.
>>
>>
> Please break this up into two independent patches. I can sort through
> the common files when it comes time to integrate.
>> There are some changes for proper initialization too.
>>
>> Signed-off-by: Michal Simek <monstr at monstr.eu>
>>
>> ---
>>
>> V2: Applied Ben comments
>> ---
>> .../xilinx/microblaze-generic/microblaze-generic.c | 16 +
>> drivers/net/Makefile | 1 +
>> drivers/net/xilinx_emaclite.c | 86 ++--
>> drivers/net/xilinx_ll_temac.c | 558 ++++++++++++++++++++
>> include/configs/microblaze-generic.h | 2 +
>> include/netdev.h | 2 +
>> lib_microblaze/board.c | 21 +-
>> 7 files changed, 639 insertions(+), 47 deletions(-)
>> create mode 100644 drivers/net/xilinx_ll_temac.c
>>
>> diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
>> index f388b77..4ad9eb6 100644
>> --- a/board/xilinx/microblaze-generic/microblaze-generic.c
>> +++ b/board/xilinx/microblaze-generic/microblaze-generic.c
>> @@ -27,6 +27,7 @@
>>
>> #include <common.h>
>> #include <config.h>
>> +#include <netdev.h>
>> #include <asm/microblaze_intc.h>
>> #include <asm/asm.h>
>>
>> @@ -67,3 +68,18 @@ void fsl_init2 (void) {
>> NULL);
>> }
>> #endif
>> +
>> +int board_eth_init(bd_t *bis)
>> +{
>> + /*
>> + * This board either has PCI NICs or uses the CPU's TSECs
>> + * pci_eth_init() will return 0 if no NICs found, so in that case
>> + * returning -1 will force cpu_eth_init() to be called.
>> + */
>>
> I asked before to remove this incorrect information.
>> +#ifdef CONFIG_XILINX_EMACLITE
>> + return xilinx_emaclite_initialize(bis);
>> +#endif
>> +#ifdef CONFIG_XILINX_LL_TEMAC
>> + return xilinx_ll_temac_initialize(bis);
>> +#endif
>> +}
>>
> Here's an opportunity to pass in device addresses.
>> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
>> index 67018bb..4fd53f9 100644
>> --- a/drivers/net/Makefile
>> +++ b/drivers/net/Makefile
>> @@ -73,6 +73,7 @@ COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o
>> COBJS-$(CONFIG_ULI526X) += uli526x.o
>> COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
>> COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
>> +COBJS-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o
>>
>> COBJS := $(COBJS-y)
>> SRCS := $(COBJS:.o=.c)
>> diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
>> index cf39573..99b5ae1 100644
>> --- a/drivers/net/xilinx_emaclite.c
>> +++ b/drivers/net/xilinx_emaclite.c
>> @@ -14,7 +14,7 @@
>> * INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
>> * FOR A PARTICULAR PURPOSE.
>> *
>> - * (C) Copyright 2007-2008 Michal Simek
>> + * (C) Copyright 2007-2009 Michal Simek
>> * Michal SIMEK <monstr at monstr.eu>
>> *
>> * (c) Copyright 2003 Xilinx Inc.
>> @@ -25,6 +25,7 @@
>> #include <common.h>
>> #include <net.h>
>> #include <config.h>
>> +#include <malloc.h>
>> #include <asm/io.h>
>>
>> #undef DEBUG
>> @@ -62,26 +63,19 @@
>> #define XEL_RSR_RECV_IE_MASK 0x00000008UL
>>
>> typedef struct {
>> - unsigned int baseaddress; /* Base address for device (IPIF) */
>> - unsigned int nexttxbuffertouse; /* Next TX buffer to write to */
>> - unsigned int nextrxbuffertouse; /* Next RX buffer to read from */
>> - unsigned char deviceid; /* Unique ID of device - for future */
>> + u32 baseaddress; /* Base address for device (IPIF) */
>> + u32 nexttxbuffertouse; /* Next TX buffer to write to */
>> + u32 nextrxbuffertouse; /* Next RX buffer to read from */
>> + uchar deviceid; /* Unique ID of device - for future */
>> } xemaclite;
>>
>> static xemaclite emaclite;
>>
>> static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
>>
>> -/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
>> -#ifdef CONFIG_ENV_IS_NOWHERE
>> -static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
>> -#else
>> -static u8 emacaddr[ENET_ADDR_LENGTH];
>> -#endif
>> -
>> -void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
>> +static void xemaclite_alignedread (u32 * srcptr, void *destptr, u32 bytecount)
>> {
>> - unsigned int i;
>> + u32 i;
>> u32 alignbuffer;
>> u32 *to32ptr;
>> u32 *from32ptr;
>> @@ -106,9 +100,9 @@ void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
>> }
>> }
>>
>> -void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
>> +static void xemaclite_alignedwrite (void *srcptr, u32 destptr, u32 bytecount)
>> {
>> - unsigned i;
>> + u32 i;
>> u32 alignbuffer;
>> u32 *to32ptr = (u32 *) destptr;
>> u32 *from32ptr;
>> @@ -133,23 +127,16 @@ void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
>> *to32ptr++ = alignbuffer;
>> }
>>
>> -void eth_halt (void)
>> +static void emaclite_halt(struct eth_device *dev)
>> {
>> debug ("eth_halt\n");
>> }
>>
>> -int eth_init (bd_t * bis)
>> +static int emaclite_init(struct eth_device *dev, bd_t *bis)
>> {
>> - uchar enetaddr[6];
>> -
>> debug ("EmacLite Initialization Started\n");
>> memset (&emaclite, 0, sizeof (xemaclite));
>> - emaclite.baseaddress = XILINX_EMACLITE_BASEADDR;
>> -
>> - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
>> - memcpy(enetaddr, emacaddr, ENET_ADDR_LENGTH);
>> - eth_setenv_enetaddr("ethaddr", enetaddr);
>> - }
>> + emaclite.baseaddress = dev->iobase;
>>
>> /*
>> * TX - TX_PING & TX_PONG initialization
>> @@ -157,7 +144,7 @@ int eth_init (bd_t * bis)
>> /* Restart PING TX */
>> out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
>> /* Copy MAC address */
>> - xemaclite_alignedwrite (enetaddr,
>> + xemaclite_alignedwrite (dev->enetaddr,
>> emaclite.baseaddress, ENET_ADDR_LENGTH);
>> /* Set the length */
>> out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
>> @@ -170,7 +157,7 @@ int eth_init (bd_t * bis)
>> #ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
>> /* The same operation with PONG TX */
>> out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
>> - xemaclite_alignedwrite (enetaddr, emaclite.baseaddress +
>> + xemaclite_alignedwrite (dev->enetaddr, emaclite.baseaddress +
>> XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
>> out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
>> out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
>> @@ -193,7 +180,7 @@ int eth_init (bd_t * bis)
>> return 0;
>> }
>>
>> -int xemaclite_txbufferavailable (xemaclite * instanceptr)
>> +static int xemaclite_txbufferavailable (xemaclite * instanceptr)
>> {
>> u32 reg;
>> u32 txpingbusy;
>> @@ -215,12 +202,12 @@ int xemaclite_txbufferavailable (xemaclite * instanceptr)
>> return (!(txpingbusy && txpongbusy));
>> }
>>
>> -int eth_send (volatile void *ptr, int len) {
>> -
>> - unsigned int reg;
>> - unsigned int baseaddress;
>> +static int emaclite_send (struct eth_device *dev, volatile void *ptr, int len)
>> +{
>> + u32 reg;
>> + u32 baseaddress;
>>
>> - unsigned maxtry = 1000;
>> + u32 maxtry = 1000;
>>
>> if (len > ENET_MAX_MTU)
>> len = ENET_MAX_MTU;
>> @@ -292,11 +279,11 @@ int eth_send (volatile void *ptr, int len) {
>> return 0;
>> }
>>
>> -int eth_rx (void)
>> +static int emaclite_recv(struct eth_device *dev)
>> {
>> - unsigned int length;
>> - unsigned int reg;
>> - unsigned int baseaddress;
>> + u32 length;
>> + u32 reg;
>> + u32 baseaddress;
>>
>> baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
>> reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
>> @@ -352,3 +339,26 @@ int eth_rx (void)
>> return 1;
>>
>> }
>> +
>> +int xilinx_emaclite_initialize (bd_t *bis)
>> +{
>> + struct eth_device *dev;
>> +
>> + dev = malloc(sizeof(*dev));
>> + if (dev == NULL)
>> + hang();
>> +
>> + memset(dev, 0, sizeof(*dev));
>> + sprintf(dev->name, "Xilinx Emaclite");
>> +
>> + dev->iobase = XILINX_EMACLITE_BASEADDR;
>>
> Pass this in as a parameter, then you can have multiple instances.
>> + dev->priv = 0;
>> + dev->init = emaclite_init;
>> + dev->halt = emaclite_halt;
>> + dev->send = emaclite_send;
>> + dev->recv = emaclite_recv;
>> +
>> + eth_register(dev);
>> +
>> + return 0;
>> +}
>> diff --git a/drivers/net/xilinx_ll_temac.c b/drivers/net/xilinx_ll_temac.c
>> new file mode 100644
>> index 0000000..d73e22e
>> --- /dev/null
>> +++ b/drivers/net/xilinx_ll_temac.c
>> @@ -0,0 +1,558 @@
>> +/*
>> + *
>> + * Xilinx xps_ll_temac ethernet driver for u-boot
>> + *
>> + * Author: Yoshio Kashiwagi kashiwagi at co-nss.co.jp
>> + *
>> + * Copyright (C) 2008 Nissin Systems Co.,Ltd.
>> + * March 2008 created
>> + *
>> + * Copyright (C) 2008 - 2009 Michal Simek <monstr at monstr.eu>
>> + * June 2008 Microblaze optimalization, FIFO mode support
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> + * Free Software Foundation; either version 2 of the License, or (at your
>> + * option) any later version.
>> + *
>> + */
>> +
>> +#include <config.h>
>> +#include <common.h>
>> +#include <net.h>
>> +#include <malloc.h>
>> +#include <asm/processor.h>
>> +#include <asm/io.h>
>> +
>> +#ifdef XILINX_LLTEMAC_FIFO_BASEADDR
>> +# define FIFO_MODE 1
>> +#elif XILINX_LLTEMAC_SDMA_CTRL_BASEADDR
>> +# define SDMA_MODE 1
>>
> Why not set the mode via a parameter to x_initialize()? You can have a
> mode element in the priv structure that moves a lot of choices to
> runtime. More importantly, it would get rid of a lot if #ifdefs
>> +#else
>> +# error Xilinx LL Temac: Unsupported mode - Please setup SDMA or FIFO mode
>> +#endif
>> +
>> +#undef ETH_HALTING
>> +
>> +#ifdef SDMA_MODE
>> +/* XPS_LL_TEMAC SDMA registers definition */
>> +# define TX_NXTDESC_PTR (((struct ll_priv *)(dev->priv))->sdma + 0x00)
>> +# define TX_CURBUF_ADDR (((struct ll_priv *)(dev->priv))->sdma + 0x04)
>> +# define TX_CURBUF_LENGTH (((struct ll_priv *)(dev->priv))->sdma + 0x08)
>> +# define TX_CURDESC_PTR (((struct ll_priv *)(dev->priv))->sdma + 0x0c)
>> +# define TX_TAILDESC_PTR (((struct ll_priv *)(dev->priv))->sdma + 0x10)
>> +# define TX_CHNL_CTRL (((struct ll_priv *)(dev->priv))->sdma + 0x14)
>> +# define TX_IRQ_REG (((struct ll_priv *)(dev->priv))->sdma + 0x18)
>> +# define TX_CHNL_STS (((struct ll_priv *)(dev->priv))->sdma + 0x1c)
>> +
>> +# define RX_NXTDESC_PTR (((struct ll_priv *)(dev->priv))->sdma + 0x20)
>> +# define RX_CURBUF_ADDR (((struct ll_priv *)(dev->priv))->sdma + 0x24)
>> +# define RX_CURBUF_LENGTH (((struct ll_priv *)(dev->priv))->sdma + 0x28)
>> +# define RX_CURDESC_PTR (((struct ll_priv *)(dev->priv))->sdma + 0x2c)
>> +# define RX_TAILDESC_PTR (((struct ll_priv *)(dev->priv))->sdma + 0x30)
>> +# define RX_CHNL_CTRL (((struct ll_priv *)(dev->priv))->sdma + 0x34)
>> +# define RX_IRQ_REG (((struct ll_priv *)(dev->priv))->sdma + 0x38)
>> +# define RX_CHNL_STS (((struct ll_priv *)(dev->priv))->sdma + 0x3c)
>> +
>> +# define DMA_CONTROL_REG (((struct ll_priv *)(dev->priv))->sdma + 0x40)
>> +#endif
>> +
>> +/* XPS_LL_TEMAC direct registers definition */
>> +#define TEMAC_RAF0 (dev->iobase + 0x00)
>> +#define TEMAC_TPF0 (dev->iobase + 0x04)
>> +#define TEMAC_IFGP0 (dev->iobase + 0x08)
>> +#define TEMAC_IS0 (dev->iobase + 0x0c)
>> +#define TEMAC_IP0 (dev->iobase + 0x10)
>> +#define TEMAC_IE0 (dev->iobase + 0x14)
>> +
>> +#define TEMAC_MSW0 (dev->iobase + 0x20)
>> +#define TEMAC_LSW0 (dev->iobase + 0x24)
>> +#define TEMAC_CTL0 (dev->iobase + 0x28)
>> +#define TEMAC_RDY0 (dev->iobase + 0x2c)
>> +
>>
> Please represent the registers as a struct. It makes the code much
> easier to read and removes a lot of casts.
>> +#define XTE_RSE_MIIM_RR_MASK 0x0002
>> +#define XTE_RSE_MIIM_WR_MASK 0x0004
>> +#define XTE_RSE_CFG_RR_MASK 0x0020
>> +#define XTE_RSE_CFG_WR_MASK 0x0040
>> +
>> +/* XPS_LL_TEMAC indirect registers offset definition */
>> +
>> +#define RCW0 0x200
>> +#define RCW1 0x240
>> +#define TC 0x280
>> +#define FCC 0x2c0
>> +#define EMMC 0x300
>> +#define PHYC 0x320
>> +#define MC 0x340
>> +#define UAW0 0x380
>> +#define UAW1 0x384
>> +#define MAW0 0x388
>> +#define MAW1 0x38c
>> +#define AFM 0x390
>> +#define TIS 0x3a0
>> +#define TIE 0x3a4
>> +#define MIIMWD 0x3b0
>> +#define MIIMAI 0x3b4
>> +
>> +#define CNTLREG_WRITE_ENABLE_MASK 0x8000
>> +#define CNTLREG_EMAC1SEL_MASK 0x0400
>> +#define CNTLREG_ADDRESSCODE_MASK 0x03ff
>> +
>> +#define MDIO_ENABLE_MASK 0x40
>> +#define MDIO_CLOCK_DIV_MASK 0x3F
>> +#define MDIO_CLOCK_DIV_100MHz 0x28
>> +
>> +#define ETHER_MTU 1520
>> +
>> +#ifdef SDMA_MODE
>> +/* CDMAC descriptor status bit definitions */
>> +# define BDSTAT_ERROR_MASK 0x80
>> +# define BDSTAT_INT_ON_END_MASK 0x40
>> +# define BDSTAT_STOP_ON_END_MASK 0x20
>> +# define BDSTAT_COMPLETED_MASK 0x10
>> +# define BDSTAT_SOP_MASK 0x08
>> +# define BDSTAT_EOP_MASK 0x04
>> +# define BDSTAT_CHANBUSY_MASK 0x02
>> +# define BDSTAT_CHANRESET_MASK 0x01
>> +
>> +/* SDMA Buffer Descriptor */
>> +
>> +typedef struct cdmac_bd_t {
>> + struct cdmac_bd_t *next_p;
>> + unsigned char *phys_buf_p;
>> + unsigned long buf_len;
>> + unsigned char stat;
>> + unsigned char app1_1;
>> + unsigned short app1_2;
>> + unsigned long app2;
>> + unsigned long app3;
>> + unsigned long app4;
>> + unsigned long app5;
>> +} cdmac_bd __attribute((aligned(32))) ;
>> +
>> +static cdmac_bd tx_bd;
>> +static cdmac_bd rx_bd;
>> +#endif
>> +
>> +#ifdef FIFO_MODE
>> +typedef struct ll_fifo_s {
>> + int isr; /* Interrupt Status Register 0x0 */
>> + int ier; /* Interrupt Enable Register 0x4 */
>> + int tdfr; /* Transmit data FIFO reset 0x8 */
>> + int tdfv; /* Transmit data FIFO Vacancy 0xC */
>> + int tdfd; /* Transmit data FIFO 32bit wide data write port 0x10 */
>> + int tlf; /* Write Transmit Length FIFO 0x14 */
>> + int rdfr; /* Read Receive data FIFO reset 0x18 */
>> + int rdfo; /* Receive data FIFO Occupancy 0x1C */
>> + int rdfd; /* Read Receive data FIFO 32bit wide data read port 0x20 */
>> + int rlf; /* Read Receive Length FIFO 0x24 */
>> + int llr; /* Read LocalLink reset 0x28 */
>> +} ll_fifo_s;
>> +
>> +ll_fifo_s *ll_fifo = (ll_fifo_s *) (XILINX_LLTEMAC_FIFO_BASEADDR);
>> +#endif
>> +
>> +#ifdef SDMA_MODE
>> +static unsigned char tx_buffer[ETHER_MTU] __attribute((aligned(32)));
>> +#endif
>> +static unsigned char rx_buffer[ETHER_MTU] __attribute((aligned(32)));
>> +
>> +struct ll_priv {
>> + unsigned int sdma;
>> +};
>> +
>> +#ifdef DEBUG
>> +/* undirect hostif write to ll_temac */
>> +static void xps_ll_temac_hostif_set(struct eth_device *dev, int emac,
>> + int phy_addr, int reg_addr, int phy_data)
>> +{
>> + out_be32((u32 *)TEMAC_LSW0, phy_data);
>>
> Like here, wouldn't it be nicer to have:
> out_be32(dev->priv->regs->lsw0, phy_data)
>
> (of course, get a pointer to regs first...)
>> + out_be32((u32 *)TEMAC_CTL0, CNTLREG_WRITE_ENABLE_MASK | MIIMWD);
>> + out_be32((u32 *)TEMAC_LSW0, (phy_addr << 5) | (reg_addr));
>> + out_be32((u32 *)TEMAC_CTL0, \
>> + CNTLREG_WRITE_ENABLE_MASK | MIIMAI | (emac << 10));
>> + while(! (in_be32((u32 *)TEMAC_RDY0) & XTE_RSE_MIIM_WR_MASK));
>> +}
>> +#endif
>> +
>> +/* undirect hostif read from ll_temac */
>> +static unsigned int xps_ll_temac_hostif_get(struct eth_device *dev,
>> + int emac, int phy_addr, int reg_addr)
>> +{
>> + out_be32((u32 *)TEMAC_LSW0, (phy_addr << 5) | (reg_addr));
>> + out_be32((u32 *)TEMAC_CTL0, MIIMAI | (emac << 10));
>> + while(! (in_be32((u32 *)TEMAC_RDY0) & XTE_RSE_MIIM_RR_MASK));
>> + return in_be32((u32 *)TEMAC_LSW0);
>> +}
>> +
>> +/* undirect write to ll_temac */
>> +static void xps_ll_temac_indirect_set(struct eth_device *dev,
>> + int emac, int reg_offset, int reg_data)
>> +{
>> + out_be32((u32 *)TEMAC_LSW0, reg_data);
>> + out_be32((u32 *)TEMAC_CTL0, \
>> + CNTLREG_WRITE_ENABLE_MASK | (emac << 10) | reg_offset);
>> + while(! (in_be32((u32 *)TEMAC_RDY0) & XTE_RSE_CFG_WR_MASK));
>> +}
>> +
>> +#if DEBUG
>> +/* undirect read from ll_temac */
>> +static int xps_ll_temac_indirect_get(struct eth_device *dev,
>> + int emac, int reg_offset)
>> +{
>> + out_be32((u32 *)TEMAC_CTL0, (emac << 10) | reg_offset);
>> + while(! (in_be32((u32 *)TEMAC_RDY0) & XTE_RSE_CFG_RR_MASK));
>> + return in_be32((u32 *)TEMAC_LSW0);
>> +}
>> +#endif
>> +
>> +#ifdef DEBUG
>> +/* read from phy */
>> +static void read_phy_reg (struct eth_device *dev, int phy_addr)
>> +{
>> + int j, result;
>> + debug ("phy%d ",phy_addr);
>> + for ( j = 0; j < 32; j++) {
>> + result = xps_ll_temac_hostif_get(dev, 0, phy_addr, j);
>> + debug ("%d: 0x%x ", j, result);
>> + }
>> + debug ("\n");
>> +}
>> +#endif
>> +
>> +static int phy_addr = -1;
>> +static int link = 0;
>> +
>> +/* setting ll_temac and phy to proper setting */
>> +static int xps_ll_temac_phy_ctrl(struct eth_device *dev)
>> +{
>> + int i;
>> + unsigned int result;
>> + unsigned retries = 10;
>> +
>> + if(link == 1)
>> + return 1; /* link is setup */
>> +
>> + /* wait for link up */
>> + while (retries-- &&
>> + ((xps_ll_temac_hostif_get(dev, 0, phy_addr, 1) & 0x24) == 0x24))
>> + ;
>> +
>> + if(phy_addr == -1) {
>> + for(i = 31; i >= 0; i--) {
>> + result = xps_ll_temac_hostif_get(dev, 0, i, 1);
>> + if((result & 0x0ffff) != 0x0ffff) {
>> + debug ("phy %x result %x\n", i, result);
>> + phy_addr = i;
>> + break;
>> + }
>> + }
>> + }
>> +
>> + /* get PHY id */
>> + i = (xps_ll_temac_hostif_get(dev, 0, phy_addr, 2) << 16) | \
>> + xps_ll_temac_hostif_get(dev, 0, phy_addr, 3);
>> + debug ("LL_TEMAC: Phy ID 0x%x\n", i);
>> +
>> +#ifdef DEBUG
>> + xps_ll_temac_hostif_set(dev, 0, 0, 0, 0x8000); /* phy reset */
>> +#endif
>> + /* FIXME this part will be replaced by PHY lib */
>> + /* s3e boards */
>> + if (i == 0x7c0a3) {
>> + /* 100BASE-T/FD */
>> + xps_ll_temac_indirect_set(dev, 0, EMMC, 0x40000000);
>> + link = 1;
>> + return 1;
>> + }
>> +
>> + /* Marwell 88e1111 id - ml50x */
>> + if (i == 0x1410cc2) {
>> + result = xps_ll_temac_hostif_get(dev, 0, phy_addr, 5);
>> + if((result & 0x8000) == 0x8000) {
>> + xps_ll_temac_indirect_set(dev, 0, EMMC, 0x80000000);
>> + printf("1000BASE-T/FD\n");
>> + link = 1;
>> + } else if((result & 0x4000) == 0x4000) {
>> + xps_ll_temac_indirect_set(dev, 0, EMMC, 0x40000000);
>> + printf("100BASE-T/FD\n");
>> + link = 1;
>> + } else {
>> + printf("Unsupported mode\n");
>> + link = 0;
>> + }
>> + return 1;
>> + }
>> + return 0;
>> +}
>> +
>> +#ifdef SDMA_MODE
>> +/* bd init */
>> +static void xps_ll_temac_bd_init(struct eth_device *dev)
>> +{
>> + memset((void *)&tx_bd, 0, sizeof(cdmac_bd));
>> + memset((void *)&rx_bd, 0, sizeof(cdmac_bd));
>> +
>> + rx_bd.phys_buf_p = &rx_buffer[0];
>> +
>> + rx_bd.next_p = &rx_bd;
>> + rx_bd.buf_len = ETHER_MTU;
>> + flush_cache((u32)&rx_bd, sizeof(cdmac_bd));
>> +
>> + out_be32((u32 *)RX_CURDESC_PTR, (u32)&rx_bd);
>> + out_be32((u32 *)RX_TAILDESC_PTR, (u32)&rx_bd);
>> + out_be32((u32 *)RX_NXTDESC_PTR, (u32)&rx_bd); /* setup first fd */
>> +
>> + tx_bd.phys_buf_p = &tx_buffer[0];
>> + tx_bd.next_p = &tx_bd;
>> +
>> + flush_cache((u32)&tx_bd, sizeof(cdmac_bd));
>> + out_be32((u32 *)TX_CURDESC_PTR, (u32)&tx_bd);
>> +}
>> +
>> +static int xps_ll_temac_send_sdma(struct eth_device *dev,
>> + unsigned char *buffer, int length)
>> +{
>> + if( xps_ll_temac_phy_ctrl(dev) == 0)
>> + return 0;
>> +
>> + memcpy (tx_buffer, buffer, length);
>> + flush_cache ((u32)tx_buffer, length);
>> +
>> + tx_bd.stat = BDSTAT_SOP_MASK | BDSTAT_EOP_MASK | \
>> + BDSTAT_STOP_ON_END_MASK;
>> + tx_bd.buf_len = length;
>> + flush_cache ((u32)&tx_bd, sizeof(cdmac_bd));
>> +
>> + out_be32((u32 *)TX_CURDESC_PTR, (u32)&tx_bd);
>> + out_be32((u32 *)TX_TAILDESC_PTR, (u32)&tx_bd); /* DMA start */
>> +
>> + do {
>> + flush_cache ((u32)&tx_bd, sizeof(cdmac_bd));
>> + } while(!(((volatile int)tx_bd.stat) & BDSTAT_COMPLETED_MASK));
>> +
>> + return length;
>> +}
>> +
>> +static int xps_ll_temac_recv_sdma(struct eth_device *dev)
>> +{
>> + int length;
>> +
>> + flush_cache ((u32)&rx_bd, sizeof(cdmac_bd));
>> +
>> + if(!(rx_bd.stat & BDSTAT_COMPLETED_MASK)) {
>> + return 0;
>> + }
>> +
>> + length = rx_bd.app5;
>> + flush_cache ((u32)rx_bd.phys_buf_p, length);
>> +
>> + rx_bd.buf_len = ETHER_MTU;
>> + rx_bd.stat = 0;
>> + rx_bd.app5 = 0;
>> +
>> + flush_cache ((u32)&rx_bd, sizeof(cdmac_bd));
>> + out_be32((u32 *)RX_TAILDESC_PTR, (u32)&rx_bd);
>> +
>> + if(length > 0) {
>> + NetReceive(rx_bd.phys_buf_p, length);
>> + }
>> +
>> + return length;
>> +}
>> +#endif
>> +
>> +#ifdef FIFO_MODE
>> +#ifdef DEBUG
>> +static void debugll(int count)
>> +{
>> + printf ("%d fifo isr 0x%08x, fifo_ier 0x%08x, fifo_rdfr 0x%08x, "
>> + "fifo_rdfo 0x%08x fifo_rlr 0x%08x\n",count, ll_fifo->isr, \
>> + ll_fifo->ier, ll_fifo->rdfr, ll_fifo->rdfo, ll_fifo->rlf);
>> +}
>> +#endif
>> +
>> +static int xps_ll_temac_send_fifo(unsigned char *buffer, int length)
>>
> The FIFO functions should definitely take eth_device * as a parameter.
>> +{
>> + u32 *buf = (u32 *)buffer;
>> + u32 len, i, val;
>> +
>> + len = (length / 4) + 1;
>> +
>> + for (i = 0; i < len; i++) {
>> + val = *buf++;
>> + ll_fifo->tdfd = val;
>> + }
>> +
>> + ll_fifo->tlf = length;
>> +
>> + return length;
>> +}
>> +
>> +static int xps_ll_temac_recv_fifo(void)
>> +{
>> + u32 len, len2, i, val;
>> + u32 *buf = (u32 *)&rx_buffer;
>> +
>> + if (ll_fifo->isr & 0x04000000 ) {
>> + ll_fifo->isr = 0xffffffff; /* reset isr */
>> +
>> + /* while (ll_fifo->isr); */
>> + len = ll_fifo->rlf & 0x7FF;
>> + len2 = (len / 4) + 1;
>> +
>> + for (i = 0; i < len2; i++) {
>> + val = ll_fifo->rdfd;
>> + *buf++ = val ;
>> + }
>> +
>> + /* debugll(1); */
>> + NetReceive ((uchar *)&rx_buffer, len);
>> + }
>> + return 0;
>> +}
>> +#endif
>> +
>> +/* setup mac addr */
>> +static int xps_ll_temac_addr_setup(struct eth_device *dev)
>> +{
>> + int val;
>> +
>> + /* set up unicast MAC address filter */
>> + val = ((dev->enetaddr[3] << 24) | (dev->enetaddr[2] << 16) |
>> + (dev->enetaddr[1] << 8) | (dev->enetaddr[0] ));
>> + xps_ll_temac_indirect_set(dev, 0, UAW0, val);
>> + val = (dev->enetaddr[5] << 8) | dev->enetaddr[4] ;
>> + xps_ll_temac_indirect_set(dev, 0, UAW1, val);
>> +
>> + return 0;
>> +}
>> +
>> +static int xps_ll_temac_init(struct eth_device *dev, bd_t *bis)
>> +{
>> +#ifdef SDMA_MODE
>> + xps_ll_temac_bd_init(dev);
>> +#endif
>> +#ifdef FIFO_MODE
>> + ll_fifo->tdfr = 0x000000a5; /* set fifo length */
>> + ll_fifo->rdfr = 0x000000a5;
>> +
>> + /* ll_fifo->isr = 0x0; */
>> + /* ll_fifo->ier = 0x0; */
>> +#endif
>> + xps_ll_temac_indirect_set(dev, 0, MC,
>> + MDIO_ENABLE_MASK | MDIO_CLOCK_DIV_100MHz);
>> +
>> + xps_ll_temac_addr_setup(dev);
>> + /* Promiscuous mode disable */
>> + xps_ll_temac_indirect_set(dev, 0, AFM, 0x00000000);
>> + /* Enable Receiver */
>> + xps_ll_temac_indirect_set(dev, 0, RCW1, 0x10000000);
>> + /* Enable Transmitter */
>> + xps_ll_temac_indirect_set(dev, 0, TC, 0x10000000);
>> + return 0;
>> +}
>> +
>> +
>> +static void xps_ll_temac_halt(struct eth_device *dev)
>> +{
>> +#ifdef ETH_HALTING
>> + /* Disable Receiver */
>> + xps_ll_temac_indirect_set(dev, 0, RCW1, 0x00000000);
>> + /* Disable Transmitter */
>> + xps_ll_temac_indirect_set(dev, 0, TC, 0x00000000);
>> +
>> +#ifdef SDMA_MODE
>> + out_be32((u32 *)DMA_CONTROL_REG, 0x00000001);
>> + while(in_be32((u32 *)DMA_CONTROL_REG) & 1);
>> +#endif
>> +#ifdef FIFO_MODE
>> + /* reset fifos */
>> +#endif
>> +#endif
>> +}
>> +
>> +/* halt device */
>> +static void ll_temac_halt(struct eth_device *dev)
>> +{
>> + link = 0;
>> + xps_ll_temac_halt(dev);
>> +}
>> +
>> +static int ll_temac_init(struct eth_device *dev, bd_t *bis)
>> +{
>> + static int first = 1;
>> +#if DEBUG
>> + int i;
>> +#endif
>> + if(!first)
>> + return 0;
>> + first = 0;
>> +
>> + xps_ll_temac_init(dev, bis);
>> +
>> + printf("%s: Xilinx XPS LocalLink Tri-Mode Ether MAC #%d at 0x%08X.\n",
>> + dev->name, 0, dev->iobase);
>> +
>> +#if DEBUG
>> + for(i = 0; i < 32; i++) {
>> + read_phy_reg(dev, i);
>> + }
>> +#endif
>> + xps_ll_temac_phy_ctrl(dev);
>> + return 1;
>> +}
>> +
>> +
>> +static int ll_temac_send(struct eth_device *dev, volatile void *packet,
>> + int length)
>> +{
>> +#ifdef SDMA_MODE
>> + return xps_ll_temac_send_sdma(dev, (unsigned char *)packet, length);
>> +#endif
>> +#ifdef FIFO_MODE
>> + return xps_ll_temac_send_fifo((unsigned char *)packet, length);
>> +#endif
>> +}
>> +
>> +static int ll_temac_recv(struct eth_device *dev)
>> +{
>> +#ifdef SDMA_MODE
>> + return xps_ll_temac_recv_sdma(dev);
>> +#endif
>> +#ifdef FIFO_MODE
>> + return xps_ll_temac_recv_fifo();
>> +#endif
>> +}
>> +
>> +int xilinx_ll_temac_initialize (bd_t *bis)
>> +{
>> + struct eth_device *dev;
>> +
>> + dev = calloc(1, sizeof(*dev));
>> + if (dev == NULL)
>> + hang();
>> +
>> + dev->priv = (struct ll_priv *)
>> + calloc(1, sizeof(struct ll_priv));
>> +
>> + if (dev->priv == NULL)
>> + hang();
>> +
>> + sprintf(dev->name, "Xilinx LL TEMAC");
>> +
>> + dev->iobase = XILINX_LLTEMAC_BASEADDR;
>> +#ifdef SDMA_MODE
>> + ((struct ll_priv *)(dev->priv))->sdma =
>> + XILINX_LLTEMAC_SDMA_CTRL_BASEADDR;
>> +#endif
>>
> If you pass this stuff in as parameters, you can have multiple instances.
>> +
>> + dev->init = ll_temac_init;
>> + dev->halt = ll_temac_halt;
>> + dev->send = ll_temac_send;
>> + dev->recv = ll_temac_recv;
>> +
>> + eth_register(dev);
>> +
>> + return 0;
>> +}
>> diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
>> index 9a08987..3fd2211 100644
>> --- a/include/configs/microblaze-generic.h
>> +++ b/include/configs/microblaze-generic.h
>> @@ -229,8 +229,10 @@
>>
>> #ifndef CONFIG_SYS_ENET
>> #undef CONFIG_CMD_NET
>> + #undef CONFIG_NET_MULTI
>> #else
>> #define CONFIG_CMD_PING
>> + #define CONFIG_NET_MULTI
>> #endif
>>
>> #if defined(CONFIG_SYSTEMACE)
>> diff --git a/include/netdev.h b/include/netdev.h
>> index 50329a3..8da0110 100644
>> --- a/include/netdev.h
>> +++ b/include/netdev.h
>> @@ -78,6 +78,8 @@ int tsi108_eth_initialize(bd_t *bis);
>> int uec_initialize(int index);
>> int uec_standard_init(bd_t *bis);
>> int uli526x_initialize(bd_t *bis);
>> +int xilinx_emaclite_initialize (bd_t *bis);
>> +int xilinx_ll_temac_initialize(bd_t *bis);
>> int sh_eth_initialize(bd_t *bis);
>> int dm9000_initialize(bd_t *bis);
>>
>> diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
>> index cfed5fe..8d17b03 100644
>> --- a/lib_microblaze/board.c
>> +++ b/lib_microblaze/board.c
>> @@ -30,6 +30,7 @@
>> #include <timestamp.h>
>> #include <version.h>
>> #include <watchdog.h>
>> +#include <net.h>
>>
>> DECLARE_GLOBAL_DATA_PTR;
>>
>> @@ -41,10 +42,6 @@ extern int gpio_init (void);
>> #ifdef CONFIG_SYS_INTC_0
>> extern int interrupts_init (void);
>> #endif
>> -#if defined(CONFIG_CMD_NET)
>> -extern int eth_init (bd_t * bis);
>> -extern int getenv_IPaddr (char *);
>> -#endif
>>
>> /*
>> * Begin and End of memory area for malloc(), and current "brk"
>> @@ -168,14 +165,20 @@ void board_init (void)
>> }
>> #endif
>>
>> + /* relocate environment function pointers etc. */
>> + env_relocate ();
>> +
>> #if defined(CONFIG_CMD_NET)
>> /* IP Address */
>> - bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
>> - eth_init (bd);
>> -#endif
>> + bd->bi_ip_addr = getenv_IPaddr("ipaddr");
>>
>> - /* relocate environment function pointers etc. */
>> - env_relocate ();
>> + printf("Net: ");
>> + eth_initialize(gd->bd);
>> +
>> + uchar enetaddr[6];
>> + eth_getenv_enetaddr("ethaddr", enetaddr);
>> + printf("MAC: %pM\n", enetaddr);
>> +#endif
>>
>> /* main_loop */
>> for (;;) {
>>
> Thanks a lot. This is promising.
>
> regards,
> Ben
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
--
Michal Simek, Ing. (M.Eng)
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel 2.6 Microblaze Linux - http://www.monstr.eu/fdt/
Microblaze U-BOOT custodian
More information about the U-Boot
mailing list