[U-Boot] Does U-boot supports Spansion S29GL512P NOR Flash?

[Frank Svendsbøe]

On Fri, Apr 9, 2010 at 10:07 AM, prakash bedge <prakash.bedge at gmail.com> wrote:
> Hi Frank,
>
> Why I should use MIRRORX16 in BDI3000 config file?
>

According to the different flash algorithms described in the BDI
manual, this was the closest we found, and it works.
What chiptype do you use today?

> Can you please tell which boards support the S29GL512P NOR flash?
>

None yet I think. We'll commit a patch soon which supports the Siemens
Digital Powerline Modem (DPM).

Our U-Boot/Linux hardware is based on Analogue & Micros Adder Module,
but modified a bit (different flash and SDRAM,
contains an FPGA, an AVR and a TI DSP).

Best regards,
Frank

> Regards,
> Prakash Bedge
> On Fri, Apr 9, 2010 at 1:18 PM, Frank Svendsbøe <frank.svendsboe at gmail.com>
> wrote:
>>
>> On Fri, Apr 9, 2010 at 7:26 AM, prakash bedge <prakash.bedge at gmail.com>
>> wrote:
>> > Hi,
>> >
>> > In U-boot I am not seeing the support for Spansion S29GL512P NOR flash.
>> >
>> > This chip is CFI compliant so I believe the common CFI driver should
>> > work
>> > with this chip.
>> >
>> > Does U-boot supports S29GL512P NOR flash or I have to implement the
>> > functionality to support S29GL512P?
>> >
>> > If anyone has tried with S29GL512P NOR flash please share the
>> > experiecne.
>> >
>>
>> Hi Prakash,
>>
>> I can confirm the S29GL512P is working with U-Boot (and Linux). No
>> special work has been
>> done to make it work. Use chiptype MIRRORX16, if you're using a
>> BDI3000 JTAG to flash U-Boot.
>>
>> Good luck
>> Frank
>>
>> >
>> > Thanks & Regards,
>> > Prakash
>> >
>> > _______________________________________________
>> > U-Boot mailing list
>> > U-Boot at lists.denx.de
>> > http://lists.denx.de/mailman/listinfo/u-boot
>> >
>> >
>
>