[U-Boot] [PATCH 4/4] mpc832x: add support for mpc8321 based tuda1 board

Heiko Schocher hs at denx.de
Mon Apr 12 09:33:26 CEST 2010


This board is similar to suvd3 board. So most initialisation topics
are taken from suvd3 (UART1, Ethernet, piggy PHY, flash, ram) only the
application specific chip selects differ.

Signed-off-by: Lukas Roggli <lukas.roggli at keymile.com>
Signed-off-by: Holger Brunck <holger.brunck at keymile.com>
Signed-off-by: Heiko Schocher <hs at denx.de>
---
 MAINTAINERS             |    1 +
 MAKEALL                 |    1 +
 Makefile                |    3 +-
 include/configs/tuda1.h |  250 +++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 254 insertions(+), 1 deletions(-)
 create mode 100644 include/configs/tuda1.h

diff --git a/MAINTAINERS b/MAINTAINERS
index e2f2eb6..91b79b8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -413,6 +413,7 @@ Heiko Schocher <hs at denx.de>
 	sc3		PPC405GP
 	suen3		ARM926EJS (Kirkwood SoC)
 	suvd3		MPC8321
+	tuda1		MPC8321
 	tuxa1		MPC8321
 	uc101		MPC5200

diff --git a/MAKEALL b/MAKEALL
index db47b41..19b67b2 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -377,6 +377,7 @@ LIST_83xx="		\
 	SIMPC8313_LP	\
 	suvd3		\
 	TQM834x		\
+	tuda1           \
 	tuxa1           \
 	vme8349		\
 "
diff --git a/Makefile b/Makefile
index 40f411f..af19b64 100644
--- a/Makefile
+++ b/Makefile
@@ -2394,8 +2394,9 @@ suvd3_config: unconfig
 TQM834x_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x tqc

+tuda1_config \
 tuxa1_config: unconfig
-	@$(MKCONFIG) tuxa1 ppc mpc83xx km83xx keymile
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx km83xx keymile

 caddy2_config \
 vme8349_config:		unconfig
diff --git a/include/configs/tuda1.h b/include/configs/tuda1.h
new file mode 100644
index 0000000..49aa98a
--- /dev/null
+++ b/include/configs/tuda1.h
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *                    Dave Liu <daveliu at freescale.com>
+ *
+ * Copyright (C) 2007 Logic Product Development, Inc.
+ *                    Peter Barada <peterb at logicpd.com>
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *                    Anton Vorontsov <avorontsov at ru.mvista.com>
+ *
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * (C) Copyright 2010
+ * Lukas Roggli, KEYMILE Ltd, lukas.roggli at keymile.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1 /* E300 family */
+#define CONFIG_QE		1 /* Has QE */
+#define CONFIG_MPC83xx		1 /* MPC83xx family */
+#define CONFIG_MPC832x		1 /* MPC832x CPU specific */
+#define CONFIG_TUDA1		1 /* TUDA1 board specific */
+#define CONFIG_HOSTNAME		tuda1
+#define CONFIG_KM_BOARD_NAME   "tuda1"
+
+#define CONFIG_KM_DEF_NETDEV	\
+	"netdev=eth0\0"
+
+#define CONFIG_KM_DEF_ROOTPATH		\
+	"rootpath=/opt/eldk/ppc_8xx\0"
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km83xx-common.h"
+
+#define CONFIG_MISC_INIT_R	1
+
+/*
+ * System IO Config
+ */
+#define CONFIG_SYS_SICRH	0x00000006
+#define CONFIG_SYS_SICRL	SICRL_IRQ_CKS
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \
+	HRCWL_DDR_TO_SCB_CLK_2X1 | \
+	HRCWL_CSB_TO_CLKIN_2X1 | \
+	HRCWL_CORE_TO_CSB_2_5X1 | \
+	HRCWL_CE_PLL_VCO_DIV_2 | \
+	HRCWL_CE_TO_PLL_1X3)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+	HRCWH_PCI_AGENT | \
+	HRCWH_PCI_ARBITER_DISABLE | \
+	HRCWH_CORE_ENABLE | \
+	HRCWH_FROM_0X00000100 | \
+	HRCWH_BOOTSEQ_DISABLE | \
+	HRCWH_SW_WATCHDOG_DISABLE | \
+	HRCWH_ROM_LOC_LOCAL_16BIT | \
+	HRCWH_BIG_ENDIAN | \
+	HRCWH_LALE_NORMAL)
+
+#define CONFIG_SYS_DDR_CS0_BNDS		0x0000007f
+#define CONFIG_SYS_DDR_SDRAM_CFG	(SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+					SDRAM_CFG_32_BE | \
+					SDRAM_CFG_2T_EN | \
+					SDRAM_CFG_SREN)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
+#define CONFIG_SYS_DDR_CLK_CNTL		(DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CONFIG_SYS_DDR_INTERVAL	((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+				 (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_AP | \
+					CSCONFIG_ODT_WR_CFG | \
+					CSCONFIG_ROW_BIT_13 | \
+					CSCONFIG_COL_BIT_10)
+
+#define CONFIG_SYS_DDR_MODE	0x47860252
+#define CONFIG_SYS_DDR_MODE2	0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0	((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+				 (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+				 (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+				 (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+				 (0 << TIMING_CFG0_WWT_SHIFT) | \
+				 (0 << TIMING_CFG0_RRT_SHIFT) | \
+				 (0 << TIMING_CFG0_WRT_SHIFT) | \
+				 (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1	((TIMING_CFG1_CASLAT_50) | \
+				 (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+				 (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+				 (2 << TIMING_CFG1_WRREC_SHIFT) | \
+				 (6 << TIMING_CFG1_REFREC_SHIFT) | \
+				 (2 << TIMING_CFG1_ACTTORW_SHIFT) | \
+				 (6 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+				 (2 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2	((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+				 (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+				 (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+				 (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+				 (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+				 (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+				 (5 << TIMING_CFG2_CPO_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+
+
+#define CONFIG_SYS_PIGGY_BASE	0xE8000000
+#define	CONFIG_SYS_PIGGY_SIZE	128
+#define CONFIG_SYS_APP1_BASE	0xA0000000    /* PAXG */
+#define	CONFIG_SYS_APP1_SIZE	256 /* Megabytes */
+#define CONFIG_SYS_APP2_BASE	0xB0000000    /* PINC3 */
+#define	CONFIG_SYS_APP2_SIZE	256 /* Megabytes */
+
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LBC_LBCR	0x00000000
+
+/*
+ * Init Local Bus Memory Controller:
+ *
+ * Bank Bus     Machine PortSz  Size  Device
+ * ---- ---     ------- ------  -----  ------
+ *  2   Local   GPCM    8 bit  256MB 	PAXG
+ *  3   Local   GPCM    8 bit  256MB 	PINC3
+ *
+ */
+
+/*
+ * PAXG on the local bus CS2
+ */
+/* Window base at flash base */
+#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_APP1_BASE
+/* Window size: 256 MB */
+#define CONFIG_SYS_LBLAWAR2_PRELIM	(LBLAWAR_EN | LBLAWAR_256MB)
+
+#define CONFIG_SYS_BR2_PRELIM	(CONFIG_SYS_APP1_BASE | \
+				BR_PS_8 | \
+				BR_MS_GPCM | \
+				BR_V)
+
+#define CONFIG_SYS_OR2_PRELIM	(MEG_TO_AM(CONFIG_SYS_APP1_SIZE) | \
+				OR_GPCM_CSNT | \
+				OR_GPCM_ACS_DIV4 | \
+				OR_GPCM_SCY_2 | \
+				(OR_GPCM_TRLX & \
+				(~OR_GPCM_EHTR)) |  /* EHTR = 0 */ \
+				OR_GPCM_EAD)
+/*
+ * PINC3 on the local bus CS3
+ */
+/* Access window base at PINC3 base */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_APP2_BASE
+/* Window size: 256 MB */
+#define CONFIG_SYS_LBLAWAR3_PRELIM	(LBLAWAR_EN | LBLAWAR_256MB)
+
+#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_APP2_BASE | \
+				BR_PS_8 | 	\
+				BR_MS_GPCM | 	\
+				BR_V)
+
+#define CONFIG_SYS_OR3_PRELIM	(MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+				OR_GPCM_CSNT | \
+				(OR_GPCM_ACS_DIV2 & /* ACS = 11 */ \
+				(~OR_GPCM_XACS)) |  /* XACS = 0 */ \
+				(OR_GPCM_SCY_2 & \
+				(~OR_GPCM_EHTR)) |  /* EHTR = 0 */ \
+				OR_GPCM_TRLX)
+
+#define CONFIG_SYS_MAMR		(MxMR_GPL_x4DIS | \
+				0x0000c000 | \
+				MxMR_WLFx_2X)
+
+/*
+ * MMU Setup
+ */
+/* PAXG:  icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_APP1_BASE | \
+				BATL_PP_10 | \
+				BATL_MEMCOHERENCE)
+/* 512M should also include APP2... */
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_APP1_BASE | \
+				BATU_BL_256M | \
+				BATU_VS | \
+				BATU_VP)
+#define CONFIG_SYS_DBAT5L	(CONFIG_SYS_APP1_BASE | \
+				BATL_PP_10 | \
+				BATL_CACHEINHIBIT | \
+				BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L	(CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L	(CFG_PCI1_MMIO_PHYS | \
+			BATL_PP_10 | \
+			BATL_CACHEINHIBIT | \
+			BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U	(CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+#else /* CONFIG_PCI */
+
+/* PINC3:  icache cacheable, but dcache-inhibit and guarded */
+#define CONFIG_SYS_IBAT6L	(CONFIG_SYS_APP2_BASE | \
+				BATL_PP_10 | \
+				BATL_MEMCOHERENCE)
+#define CONFIG_SYS_IBAT6U	(CONFIG_SYS_APP2_BASE | \
+				BATU_BL_256M | \
+				BATU_VS | \
+				BATU_VP)
+#define CONFIG_SYS_DBAT6L	(CONFIG_SYS_APP2_BASE | \
+				BATL_PP_10 | \
+				BATL_CACHEINHIBIT | \
+				BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
+#endif /* CONFIG_PCI */
+
+#endif /* __CONFIG_H */
-- 
1.6.2.5

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany


More information about the U-Boot mailing list