[U-Boot] [PATCH 07/17] SPEAr : Network driver support added
Ben Warren
biggerbadderben at gmail.com
Wed Apr 21 19:48:57 CEST 2010
Hi Vipin,
On 4/21/2010 12:54 AM, Vipin KUMAR wrote:
> Designware network driver support added.
> This is a Synopsys ethernet controller
>
> Signed-off-by: Vipin Kumar<vipin.kumar at st.com>
> ---
> drivers/net/Makefile | 1 +
> drivers/net/dw_eth.c | 504 ++++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/net/dw_eth.h | 281 ++++++++++++++++++++++++++++
>
I agree with Peter that a different name would be preferable. Something
conveying the manufacturer or, if it's a very specific controller, the
part number. Give thought to whether it will potentially be expanded up
or generic-ized in the future (I know that's hard to do!)
> include/netdev.h | 1 +
> 4 files changed, 787 insertions(+), 0 deletions(-)
> create mode 100755 drivers/net/dw_eth.c
> create mode 100644 drivers/net/dw_eth.h
>
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> index 1ec0ba1..d03c353 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -68,6 +68,7 @@ COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o
> COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
> COBJS-$(CONFIG_SMC91111) += smc91111.o
> COBJS-$(CONFIG_SMC911X) += smc911x.o
> +COBJS-$(CONFIG_DW_ETH) += dw_eth.o
> COBJS-$(CONFIG_TIGON3) += tigon3.o bcm570x_autoneg.o 5701rls.o
> COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
> COBJS-$(CONFIG_TSEC_ENET) += tsec.o
>
Alphabetical order, please
> diff --git a/drivers/net/dw_eth.c b/drivers/net/dw_eth.c
> new file mode 100755
> index 0000000..52e7d15
> --- /dev/null
> +++ b/drivers/net/dw_eth.c
> @@ -0,0 +1,504 @@
> +/*
> + * (C) Copyright 2009
> + * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
> + *
> + * (C) Copyright 2008
> + * Deepak Sikri, ST Micoelectronics, deepak.sikri at st.com.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +/*
> + * Designware ethernet IP driver for u-boot
> + */
> +
> +#include<common.h>
> +#include<miiphy.h>
> +#include<malloc.h>
> +#include<linux/err.h>
> +#include<asm/io.h>
> +#include "dw_eth.h"
> +
> +static void tx_descs_init(struct eth_device *dev)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
> + struct dmamacdescr *desc_table_p =&priv->tx_mac_descrtable[0];
> + char *txbuffs =&priv->txbuffs[0];
> + struct dmamacdescr *desc_p;
> +
> + u32 idx;
> +
> + for (idx = 0; idx< CONFIG_TX_DESCR_NUM; idx++) {
> +
> + desc_p =&desc_table_p[idx];
> + desc_p->dmamac_addr =&txbuffs[idx * CONFIG_ETH_BUFSIZE];
> + desc_p->dmamac_next =&desc_table_p[idx + 1];
> +
> +#if defined(CONFIG_DW_ALTDESC)
>
Please use a more descriptive CONFIG option. Remember these have global
namespace
> + desc_p->txrx_status&= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
> + DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
> + DESC_TXSTS_TXCHECKINSCTRL | \
> + DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
> +
> + desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
> + desc_p->dmamac_cntl = 0;
> + desc_p->txrx_status&= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
> +#else
> + desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
> + desc_p->txrx_status = 0;
> +#endif
> + }
> +
> + /* Correcting the last pointer of the chain */
> + desc_p->dmamac_next =&desc_table_p[0];
> +
> + writel((ulong)&desc_table_p[0],&dma_p->txdesclistaddr);
> +}
> +
> +static void rx_descs_init(struct eth_device *dev)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
> + struct dmamacdescr *desc_table_p =&priv->rx_mac_descrtable[0];
> + char *rxbuffs =&priv->rxbuffs[0];
> + struct dmamacdescr *desc_p;
> +
> + u32 idx;
> +
> + for (idx = 0; idx< CONFIG_RX_DESCR_NUM; idx++) {
> +
>
Remove unnecessary blank lines
> + desc_p =&desc_table_p[idx];
> + desc_p->dmamac_addr =&rxbuffs[idx * CONFIG_ETH_BUFSIZE];
> + desc_p->dmamac_next =&desc_table_p[idx + 1];
> +
> + desc_p->dmamac_cntl =
> + (MAC_MAX_FRAME_SZ& DESC_RXCTRL_SIZE1MASK) | \
> + DESC_RXCTRL_RXCHAIN;
> +
> + desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
> + }
> +
> + /* Correcting the last pointer of the chain */
> + desc_p->dmamac_next =&desc_table_p[0];
> +
> + writel((ulong)&desc_table_p[0],&dma_p->rxdesclistaddr);
> +}
> +
> +static void descs_init(struct eth_device *dev)
> +{
> + tx_descs_init(dev);
> + rx_descs_init(dev);
> +}
> +
> +static void mac_reset(struct eth_device *dev)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
> +
> + u32 timeout = CONFIG_MACRESET_TIMEOUT;
> +
> + writel(DMAMAC_SRST,&dma_p->busmode);
> + writel(MII_PORTSELECT,&mac_p->conf);
> +
> + do {
> + if (!(readl(&dma_p->busmode)& DMAMAC_SRST))
> + break;
> + udelay(1000);
> + } while (timeout--);
> +}
> +
> +static int dw_eth_init(struct eth_device *dev, bd_t *bis)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
> +
> + u8 *mac_id =&dev->enetaddr[0];
> + u32 conf, macid_lo, macid_hi;
> +
> + /* Reset ethernet hardware */
> + mac_reset(dev);
> +
> + macid_lo = mac_id[0] + (mac_id[1]<< 8) + \
> + (mac_id[2]<< 16) + (mac_id[3]<< 24);
> + macid_hi = mac_id[4] + (mac_id[5]<< 8);
> +
> + writel(macid_hi,&mac_p->macaddr0hi);
> + writel(macid_lo,&mac_p->macaddr0lo);
> +
>
Please provide a static function with signature 'static void
program_mac(struct eth_device *)' for programming the MAC.
> + writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
> + &dma_p->busmode);
> +
> + writel(FLUSHTXFIFO | readl(&dma_p->opmode),&dma_p->opmode);
> + writel(STOREFORWARD | TXSECONDFRAME,&dma_p->opmode);
> +
> + conf = FRAMEBURSTENABLE | DISABLERXOWN;
> +
> + if (priv->speed != SPEED_1000M)
> + conf |= MII_PORTSELECT;
> +
> + if (priv->duplex == FULL_DUPLEX)
> + conf |= FULLDPLXMODE;
> +
> + writel(conf,&mac_p->conf);
> +
> + descs_init(dev);
> +
> + /*
> + * Start/Enable xfer at dma as well as mac level
> + */
> + writel(readl(&dma_p->opmode) | RXSTART,&dma_p->opmode);
> + writel(readl(&dma_p->opmode) | TXSTART,&dma_p->opmode);
> +
> + writel(readl(&mac_p->conf) | RXENABLE,&mac_p->conf);
> + writel(readl(&mac_p->conf) | TXENABLE,&mac_p->conf);
> +
> + return 0;
> +}
> +
> +static int dw_eth_send(struct eth_device *dev, volatile void *packet,
> + int length)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
> + u32 desc_num = priv->tx_currdescnum;
> + struct dmamacdescr *desc_p =&priv->tx_mac_descrtable[desc_num];
> +
> + /* Check if the descriptor is owned by CPU */
> + if (desc_p->txrx_status& DESC_TXSTS_OWNBYDMA) {
> + printf("eth_send : CPU not owner of tx frame\n");
> + return -1;
> + }
> +
> + memcpy((void *)desc_p->dmamac_addr, (void *)packet, length);
> +
> +#if defined(CONFIG_DW_ALTDESC)
> + desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
> + desc_p->dmamac_cntl |= (length<< DESC_TXCTRL_SIZE1SHFT)& \
> + DESC_TXCTRL_SIZE1MASK;
> +
> + desc_p->txrx_status&= ~(DESC_TXSTS_MSK);
> + desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
> +#else
> + desc_p->dmamac_cntl |= ((length<< DESC_TXCTRL_SIZE1SHFT)& \
> + DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
> + DESC_TXCTRL_TXFIRST;
> +
> + desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
> +#endif
> +
> + /* Test the wrap-around condition. */
> + if (++desc_num>= CONFIG_TX_DESCR_NUM)
> + desc_num = 0;
> +
> + priv->tx_currdescnum = desc_num;
> +
> + /* Start the transmission */
> + writel(POLL_DATA,&dma_p->txpolldemand);
> +
> + return 0;
> +}
> +
> +static int dw_eth_recv(struct eth_device *dev)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + u32 desc_num = priv->rx_currdescnum;
> + struct dmamacdescr *desc_p =&priv->rx_mac_descrtable[desc_num];
> +
> + u32 status = desc_p->txrx_status;
> + int length = 0;
> +
> + /* Check if the owner is the CPU */
> + if (!(status& DESC_RXSTS_OWNBYDMA)) {
> +
> + length = (status& DESC_RXSTS_FRMLENMSK)>> \
> + DESC_RXSTS_FRMLENSHFT;
> +
> + NetReceive(desc_p->dmamac_addr, length);
> +
> + /*
> + * Make the current descriptor valid again and go to
> + * the next one
> + */
> + desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
> +
> + /* Test the wrap-around condition. */
> + if (++desc_num>= CONFIG_RX_DESCR_NUM)
> + desc_num = 0;
> + }
> +
> + priv->rx_currdescnum = desc_num;
> +
> + return length;
> +}
> +
> +static void dw_eth_halt(struct eth_device *dev)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> +
> + mac_reset(dev);
> + priv->tx_currdescnum = priv->rx_currdescnum = 0;
> +}
> +
> +static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
> + u32 miiaddr;
> + u32 timeout = CONFIG_MDIO_TIMEOUT;
> +
> + miiaddr = ((addr<< MIIADDRSHIFT)& MII_ADDRMSK) | \
> + ((reg<< MIIREGSHIFT)& MII_REGMSK);
> +
> + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY,&mac_p->miiaddr);
> +
> + do {
> + if (!(readl(&mac_p->miiaddr)& MII_BUSY))
> + break;
> + udelay(1000);
> + } while (timeout--);
> +
> + *val = readl(&mac_p->miidata);
> +
> + return 0;
> +}
> +
> +static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
> + u32 miiaddr;
> + u32 timeout = CONFIG_MDIO_TIMEOUT;
> + u16 value;
> +
> + writel(val,&mac_p->miidata);
> + miiaddr = ((addr<< MIIADDRSHIFT)& MII_ADDRMSK) | \
> + ((reg<< MIIREGSHIFT)& MII_REGMSK) | MII_WRITE;
> +
> + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY,&mac_p->miiaddr);
> +
> + do {
> + if (!(readl(&mac_p->miiaddr)& MII_BUSY))
> + break;
> + udelay(1000);
> + } while (timeout--);
> +
> + /* Needed as a fix for ST-Phy */
> + eth_mdio_read(dev, addr, reg,&value);
> +
> + return 0;
> +}
> +
> +static u8 find_phy(struct eth_device *dev)
> +{
> + u8 phy_addr = 0;
> + u16 ctrl, oldctrl;
> +
> + do {
> + eth_mdio_read(dev, phy_addr, PHY_BMCR,&ctrl);
> + oldctrl = ctrl& PHY_BMCR_AUTON;
> +
> + ctrl ^= PHY_BMCR_AUTON;
> + eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
> + eth_mdio_read(dev, phy_addr, PHY_BMCR,&ctrl);
> + ctrl&= PHY_BMCR_AUTON;
> +
> + if (ctrl == oldctrl) {
> + phy_addr++;
> + } else {
> + ctrl ^= PHY_BMCR_AUTON;
> + eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
> + break;
> + }
> + } while (phy_addr< 32);
> +
> + return phy_addr;
> +}
> +
> +static void dw_reset_phy(struct eth_device *dev)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + u16 ctrl;
> + u32 timeout = CONFIG_PHYRESET_TIMEOUT;
> + u32 phy_addr = priv->address;
> +
> + eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET);
> + do {
> + eth_mdio_read(dev, phy_addr, PHY_BMCR,&ctrl);
> + if (!(ctrl& PHY_BMCR_RESET))
> + break;
> + udelay(1000);
> + } while (timeout--);
> +
> +#ifdef CONFIG_PHY_RESET_DELAY
> + udelay(CONFIG_PHY_RESET_DELAY);
> +#endif
> +}
> +
> +static void configure_phy(struct eth_device *dev)
> +{
> + struct dw_eth_dev *priv = dev->priv;
> + u8 phy_addr;
> + u16 bmcr, ctrl;
> +#if defined(CONFIG_DW_AUTONEG)
> + u16 bmsr;
> + u32 timeout;
> + u16 anlpar, btsr;
> +#endif
> + priv->address = find_phy(dev);
> + phy_addr = priv->address;
> +
> + dw_reset_phy(dev);
> +
> +#if defined(CONFIG_DW_AUTONEG)
> + bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \
> + PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS;
> +#else
> + bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX;
> +
> +#if defined(CONFIG_DW_SPEED10M)
> + bmcr&= ~PHY_BMCR_100MB;
> +#endif
> +#if defined(CONFIG_DW_DUPLEXHALF)
> + bmcr&= ~PHY_BMCR_DPLX;
> +#endif
> +#endif
> + eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr);
> +
> + /* Read the phy status register and populate priv structure */
> +#if defined(CONFIG_DW_AUTONEG)
> + timeout = CONFIG_AUTONEG_TIMEOUT;
> + do {
> + eth_mdio_read(dev, phy_addr, PHY_BMSR,&bmsr);
> + if (bmsr& PHY_BMSR_AUTN_COMP)
> + break;
> + udelay(1000);
> + } while (timeout--);
> +
> + eth_mdio_read(dev, phy_addr, PHY_ANLPAR,&anlpar);
> + eth_mdio_read(dev, phy_addr, PHY_1000BTSR,&btsr);
> +
> + if (btsr& (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
> + priv->speed = SPEED_1000M;
> + if (btsr& PHY_1000BTSR_1000FD)
> + priv->duplex = FULL_DUPLEX;
> + else
> + priv->duplex = HALF_DUPLEX;
> + } else {
> + if (anlpar& PHY_ANLPAR_100)
> + priv->speed = SPEED_100M;
> + else
> + priv->speed = SPEED_10M;
> +
> + if (anlpar& (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
> + priv->duplex = FULL_DUPLEX;
> + else
> + priv->duplex = HALF_DUPLEX;
> + }
> +#else
> + eth_mdio_read(dev, phy_addr, PHY_BMCR,&ctrl);
> +
> + if (ctrl& PHY_BMCR_DPLX)
> + priv->duplex = FULL_DUPLEX;
> + else
> + priv->duplex = HALF_DUPLEX;
> +
> + if (ctrl& PHY_BMCR_1000_MBPS)
> + priv->speed = SPEED_1000M;
> + else if (ctrl& PHY_BMCR_100_MBPS)
> + priv->speed = SPEED_100M;
> + else
> + priv->speed = SPEED_10M;
> +#endif
> +}
> +
> +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
> +static int dw_mii_read(char *devname, u8 addr, u8 reg, u16 *val)
> +{
> + struct eth_device *netdev;
> +
> + netdev = eth_get_dev_by_name(devname);
> + if (netdev)
> + eth_mdio_read(netdev, addr, reg, val);
> +
> + return 0;
> +}
> +
> +static int dw_mii_write(char *devname, u8 addr, u8 reg, u16 val)
> +{
> + struct eth_device *netdev;
> +
> + netdev = eth_get_dev_by_name(devname);
> + if (netdev)
> + eth_mdio_write(netdev, addr, reg, val);
> +
> + return 0;
> +}
> +#endif
> +
> +int dw_mii_initialize(u32 id, ulong base_addr)
>
Please use the same name in this function as the driver name. We
usually reserve 'mii' for device control plane.
> +{
> + struct eth_device *netdev;
>
I'd prefer if you named this variable 'dev', since 'netdev' is the name
of a header file that's unrelated. Apply globally.
> + struct dw_eth_dev *priv;
> +
> + netdev = (struct eth_device *) malloc(sizeof(struct eth_device));
> + if (!netdev)
> + return -ENOMEM;
> +
> + /*
> + * Since the priv structure contains the descriptors which need a strict
> + * buswidth alignment, memalign is used to allocate memory
> + */
> + priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
> + if (!priv) {
> + free(netdev);
> + return -ENOMEM;
> + }
> +
> + memset(netdev, 0, sizeof(struct eth_device));
> + memset(priv, 0, sizeof(struct dw_eth_dev));
> +
> + sprintf(netdev->name, "mii%d", id);
> + netdev->iobase = (int)base_addr;
> + netdev->priv = priv;
>
If you wait a couple of days until I resubmit my change to the
'eth_device' struct, you can put in a pointer to the MAC programming
function and not have to worry about that any more.
> +
> + eth_getenv_enetaddr_by_index(id,&netdev->enetaddr[0]);
> +
> + priv->dev = netdev;
> + priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
> + priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
> + DW_DMA_BASE_OFFSET);
> +
> + mac_reset(netdev);
> + configure_phy(netdev);
> +
> + netdev->init = dw_eth_init;
> + netdev->send = dw_eth_send;
> + netdev->recv = dw_eth_recv;
> + netdev->halt = dw_eth_halt;
> +
> + eth_register(netdev);
> +
> +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
> + miiphy_register(netdev->name, dw_mii_read, dw_mii_write);
> +#endif
> + return 0;
>
This should return 1 on success.
> +}
> diff --git a/drivers/net/dw_eth.h b/drivers/net/dw_eth.h
> new file mode 100644
> index 0000000..068211a
> --- /dev/null
> +++ b/drivers/net/dw_eth.h
> @@ -0,0 +1,281 @@
> +/*
> + * (C) Copyright 2009
> + * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef _DW_ETH_H
> +#define _DW_ETH_H
> +
> +#define CONFIG_TX_DESCR_NUM 16
> +#define CONFIG_RX_DESCR_NUM 16
> +#define CONFIG_ETH_BUFSIZE 2048
> +#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
> +#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
> +
> +#define CONFIG_MACRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
> +#define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ)
> +#define CONFIG_PHYRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
> +#define CONFIG_AUTONEG_TIMEOUT (5 * CONFIG_SYS_HZ)
> +
> +struct eth_mac_regs {
> + u32 conf; /* 0x00 */
> + u32 framefilt; /* 0x04 */
> + u32 hashtablehigh; /* 0x08 */
> + u32 hashtablelow; /* 0x0c */
> + u32 miiaddr; /* 0x10 */
> + u32 miidata; /* 0x14 */
> + u32 flowcontrol; /* 0x18 */
> + u32 vlantag; /* 0x1c */
> + u32 version; /* 0x20 */
> + u8 reserved_1[0x38 - 0x24];
> + u32 intreg; /* 0x38 */
> + u32 intmask; /* 0x3c */
> + u32 macaddr0hi; /* 0x40 */
> + u32 macaddr0lo; /* 0x44 */
> +};
> +
> +/* MAC configuration register definitions */
> +#define FRAMEBURSTENABLE (1<< 21)
> +#define MII_PORTSELECT (1<< 15)
> +#define FES_100 (1<< 14)
> +#define DISABLERXOWN (1<< 13)
> +#define FULLDPLXMODE (1<< 11)
> +#define RXENABLE (1<< 2)
> +#define TXENABLE (1<< 3)
> +
> +/* MII address register definitions */
> +#define MII_BUSY (1<< 0)
> +#define MII_WRITE (1<< 1)
> +#define MII_CLKRANGE_60_100M (0)
> +#define MII_CLKRANGE_100_150M (0x4)
> +#define MII_CLKRANGE_20_35M (0x8)
> +#define MII_CLKRANGE_35_60M (0xC)
> +#define MII_CLKRANGE_150_250M (0x10)
> +#define MII_CLKRANGE_250_300M (0x14)
> +
> +#define MIIADDRSHIFT (11)
> +#define MIIREGSHIFT (6)
> +#define MII_REGMSK (0x1F<< 6)
> +#define MII_ADDRMSK (0x1F<< 11)
> +
> +
> +struct eth_dma_regs {
> + u32 busmode; /* 0x00 */
> + u32 txpolldemand; /* 0x04 */
> + u32 rxpolldemand; /* 0x08 */
> + u32 rxdesclistaddr; /* 0x0c */
> + u32 txdesclistaddr; /* 0x10 */
> + u32 status; /* 0x14 */
> + u32 opmode; /* 0x18 */
> + u32 intenable; /* 0x1c */
> + u8 reserved[0x48 - 0x20];
> + u32 currhosttxdesc; /* 0x48 */
> + u32 currhostrxdesc; /* 0x4c */
> + u32 currhosttxbuffaddr; /* 0x50 */
> + u32 currhostrxbuffaddr; /* 0x54 */
> +};
> +
> +#define DW_DMA_BASE_OFFSET (0x1000)
> +
> +/* Bus mode register definitions */
> +#define FIXEDBURST (1<< 16)
> +#define PRIORXTX_41 (3<< 14)
> +#define PRIORXTX_31 (2<< 14)
> +#define PRIORXTX_21 (1<< 14)
> +#define PRIORXTX_11 (0<< 14)
> +#define BURST_1 (1<< 8)
> +#define BURST_2 (2<< 8)
> +#define BURST_4 (4<< 8)
> +#define BURST_8 (8<< 8)
> +#define BURST_16 (16<< 8)
> +#define BURST_32 (32<< 8)
> +#define RXHIGHPRIO (1<< 1)
> +#define DMAMAC_SRST (1<< 0)
> +
> +/* Poll demand definitions */
> +#define POLL_DATA (0xFFFFFFFF)
> +
> +/* Operation mode definitions */
> +#define STOREFORWARD (1<< 21)
> +#define FLUSHTXFIFO (1<< 20)
> +#define TXSTART (1<< 13)
> +#define TXSECONDFRAME (1<< 2)
> +#define RXSTART (1<< 1)
> +
> +/* Descriptior related definitions */
> +#define MAC_MAX_FRAME_SZ (2048)
> +
> +struct dmamacdescr {
> + u32 txrx_status;
> + u32 dmamac_cntl;
> + void *dmamac_addr;
> + struct dmamacdescr *dmamac_next;
> +};
> +
> +/*
> + * txrx_status definitions
> + */
> +
> +/* tx status bits definitions */
> +#if defined(CONFIG_DW_ALTDESC)
> +
> +#define DESC_TXSTS_OWNBYDMA (1<< 31)
> +#define DESC_TXSTS_TXINT (1<< 30)
> +#define DESC_TXSTS_TXLAST (1<< 29)
> +#define DESC_TXSTS_TXFIRST (1<< 28)
> +#define DESC_TXSTS_TXCRCDIS (1<< 27)
> +
> +#define DESC_TXSTS_TXPADDIS (1<< 26)
> +#define DESC_TXSTS_TXCHECKINSCTRL (3<< 22)
> +#define DESC_TXSTS_TXRINGEND (1<< 21)
> +#define DESC_TXSTS_TXCHAIN (1<< 20)
> +#define DESC_TXSTS_MSK (0x1FFFF<< 0)
> +
> +#else
> +
> +#define DESC_TXSTS_OWNBYDMA (1<< 31)
> +#define DESC_TXSTS_MSK (0x1FFFF<< 0)
> +
> +#endif
> +
> +/* rx status bits definitions */
> +#define DESC_RXSTS_OWNBYDMA (1<< 31)
> +#define DESC_RXSTS_DAFILTERFAIL (1<< 30)
> +#define DESC_RXSTS_FRMLENMSK (0x3FFF<< 16)
> +#define DESC_RXSTS_FRMLENSHFT (16)
> +
> +#define DESC_RXSTS_ERROR (1<< 15)
> +#define DESC_RXSTS_RXTRUNCATED (1<< 14)
> +#define DESC_RXSTS_SAFILTERFAIL (1<< 13)
> +#define DESC_RXSTS_RXIPC_GIANTFRAME (1<< 12)
> +#define DESC_RXSTS_RXDAMAGED (1<< 11)
> +#define DESC_RXSTS_RXVLANTAG (1<< 10)
> +#define DESC_RXSTS_RXFIRST (1<< 9)
> +#define DESC_RXSTS_RXLAST (1<< 8)
> +#define DESC_RXSTS_RXIPC_GIANT (1<< 7)
> +#define DESC_RXSTS_RXCOLLISION (1<< 6)
> +#define DESC_RXSTS_RXFRAMEETHER (1<< 5)
> +#define DESC_RXSTS_RXWATCHDOG (1<< 4)
> +#define DESC_RXSTS_RXMIIERROR (1<< 3)
> +#define DESC_RXSTS_RXDRIBBLING (1<< 2)
> +#define DESC_RXSTS_RXCRC (1<< 1)
> +
> +/*
> + * dmamac_cntl definitions
> + */
> +
> +/* tx control bits definitions */
> +#if defined(CONFIG_DW_ALTDESC)
> +
> +#define DESC_TXCTRL_SIZE1MASK (0x1FFF<< 0)
> +#define DESC_TXCTRL_SIZE1SHFT (0)
> +#define DESC_TXCTRL_SIZE2MASK (0x1FFF<< 16)
> +#define DESC_TXCTRL_SIZE2SHFT (16)
> +
> +#else
> +
> +#define DESC_TXCTRL_TXINT (1<< 31)
> +#define DESC_TXCTRL_TXLAST (1<< 30)
> +#define DESC_TXCTRL_TXFIRST (1<< 29)
> +#define DESC_TXCTRL_TXCHECKINSCTRL (3<< 27)
> +#define DESC_TXCTRL_TXCRCDIS (1<< 26)
> +#define DESC_TXCTRL_TXRINGEND (1<< 25)
> +#define DESC_TXCTRL_TXCHAIN (1<< 24)
> +
> +#define DESC_TXCTRL_SIZE1MASK (0x7FF<< 0)
> +#define DESC_TXCTRL_SIZE1SHFT (0)
> +#define DESC_TXCTRL_SIZE2MASK (0x7FF<< 11)
> +#define DESC_TXCTRL_SIZE2SHFT (11)
> +
> +#endif
> +
> +/* rx control bits definitions */
> +#if defined(CONFIG_DW_ALTDESC)
> +
> +#define DESC_RXCTRL_RXINTDIS (1<< 31)
> +#define DESC_RXCTRL_RXRINGEND (1<< 15)
> +#define DESC_RXCTRL_RXCHAIN (1<< 14)
> +
> +#define DESC_RXCTRL_SIZE1MASK (0x1FFF<< 0)
> +#define DESC_RXCTRL_SIZE1SHFT (0)
> +#define DESC_RXCTRL_SIZE2MASK (0x1FFF<< 16)
> +#define DESC_RXCTRL_SIZE2SHFT (16)
> +
> +#else
> +
> +#define DESC_RXCTRL_RXINTDIS (1<< 31)
> +#define DESC_RXCTRL_RXRINGEND (1<< 25)
> +#define DESC_RXCTRL_RXCHAIN (1<< 24)
> +
> +#define DESC_RXCTRL_SIZE1MASK (0x7FF<< 0)
> +#define DESC_RXCTRL_SIZE1SHFT (0)
> +#define DESC_RXCTRL_SIZE2MASK (0x7FF<< 11)
> +#define DESC_RXCTRL_SIZE2SHFT (11)
> +
> +#endif
> +
> +/*
> + * dmamac_addr definitions
> + */
> +
> +/* tx addr register bits definitions */
> +
> +/* rx addr register bits definitions */
> +
>
Something's missing here...
> +
> +/*
> + * dmamac_next definitions
> + */
> +
> +/* tx next register bits definitions */
> +
> +/* rx next register bits definitions */
> +
> +struct dw_eth_dev {
> + u32 address;
> + u32 speed;
> + u32 duplex;
> + u32 tx_currdescnum;
> + u32 rx_currdescnum;
> + u32 padding;
> +
> + struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
> + struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
> +
> + char txbuffs[TX_TOTAL_BUFSIZE];
> + char rxbuffs[RX_TOTAL_BUFSIZE];
> +
> + struct eth_mac_regs *mac_regs_p;
> + struct eth_dma_regs *dma_regs_p;
> +
> + struct eth_device *dev;
> +} __attribute__ ((aligned(8)));
> +
> +/* Speed specific definitions */
> +#define SPEED_10M 1
> +#define SPEED_100M 2
> +#define SPEED_1000M 3
> +
> +/* Duplex mode specific definitions */
> +#define HALF_DUPLEX 1
> +#define FULL_DUPLEX 2
> +
> +#endif
> diff --git a/include/netdev.h b/include/netdev.h
> index 1dd80f0..460889c 100644
> --- a/include/netdev.h
> +++ b/include/netdev.h
> @@ -79,6 +79,7 @@ int scc_initialize(bd_t *bis);
> int skge_initialize(bd_t *bis);
> int smc911x_initialize(u8 dev_num, int base_addr);
> int smc91111_initialize(u8 dev_num, int base_addr);
> +int dw_mii_initialize(u32 id, ulong base_addr);
>
alphabetical order, please.
> int tsi108_eth_initialize(bd_t *bis);
> int uec_initialize(int index);
> int uec_standard_init(bd_t *bis);
>
Overall, a very good first pass.
thanks,
Ben
More information about the U-Boot
mailing list