[U-Boot] [PATCH 07/17] SPEAr : Network driver support added
Vipin KUMAR
vipin.kumar at st.com
Thu Apr 22 06:43:10 CEST 2010
On 4/21/2010 11:18 PM, Ben Warren wrote:
> Hi Vipin,
>
> On 4/21/2010 12:54 AM, Vipin KUMAR wrote:
>> Designware network driver support added.
>> This is a Synopsys ethernet controller
>>
>> Signed-off-by: Vipin Kumar<vipin.kumar at st.com>
>> ---
>> drivers/net/Makefile | 1 +
>> drivers/net/dw_eth.c | 504
>> ++++++++++++++++++++++++++++++++++++++++++++++++++
>> drivers/net/dw_eth.h | 281 ++++++++++++++++++++++++++++
>>
> I agree with Peter that a different name would be preferable. Something
> conveying the manufacturer or, if it's a very specific controller, the
> part number. Give thought to whether it will potentially be expanded up
> or generic-ized in the future (I know that's hard to do!)
I am planning to change the name to designware.c and designware.h
>> include/netdev.h | 1 +
>> 4 files changed, 787 insertions(+), 0 deletions(-)
>> create mode 100755 drivers/net/dw_eth.c
>> create mode 100644 drivers/net/dw_eth.h
>>
>> diff --git a/drivers/net/Makefile b/drivers/net/Makefile
>> index 1ec0ba1..d03c353 100644
>> --- a/drivers/net/Makefile
>> +++ b/drivers/net/Makefile
>> @@ -68,6 +68,7 @@ COBJS-$(CONFIG_DRIVER_S3C4510_ETH) += s3c4510b_eth.o
>> COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
>> COBJS-$(CONFIG_SMC91111) += smc91111.o
>> COBJS-$(CONFIG_SMC911X) += smc911x.o
>> +COBJS-$(CONFIG_DW_ETH) += dw_eth.o
>> COBJS-$(CONFIG_TIGON3) += tigon3.o bcm570x_autoneg.o 5701rls.o
>> COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
>> COBJS-$(CONFIG_TSEC_ENET) += tsec.o
>>
> Alphabetical order, please
Ah, sure
>> diff --git a/drivers/net/dw_eth.c b/drivers/net/dw_eth.c
>> new file mode 100755
>> index 0000000..52e7d15
>> --- /dev/null
>> +++ b/drivers/net/dw_eth.c
>> @@ -0,0 +1,504 @@
>> +/*
>> + * (C) Copyright 2009
>> + * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
>> + *
>> + * (C) Copyright 2008
>> + * Deepak Sikri, ST Micoelectronics, deepak.sikri at st.com.
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +/*
>> + * Designware ethernet IP driver for u-boot
>> + */
>> +
>> +#include<common.h>
>> +#include<miiphy.h>
>> +#include<malloc.h>
>> +#include<linux/err.h>
>> +#include<asm/io.h>
>> +#include "dw_eth.h"
>> +
>> +static void tx_descs_init(struct eth_device *dev)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>> + struct dmamacdescr *desc_table_p =&priv->tx_mac_descrtable[0];
>> + char *txbuffs =&priv->txbuffs[0];
>> + struct dmamacdescr *desc_p;
>> +
>> + u32 idx;
>> +
>> + for (idx = 0; idx< CONFIG_TX_DESCR_NUM; idx++) {
>> +
>> + desc_p =&desc_table_p[idx];
>> + desc_p->dmamac_addr =&txbuffs[idx * CONFIG_ETH_BUFSIZE];
>> + desc_p->dmamac_next =&desc_table_p[idx + 1];
>> +
>> +#if defined(CONFIG_DW_ALTDESC)
>>
> Please use a more descriptive CONFIG option. Remember these have global
> namespace
Hmmm, actually the peripheral supports two kinds of descriptors
Normal and Alternate/Enhanced (as they call it)
Should I put this option as CONFIG_DW_ALTDESCRIPTOR ?
>> + desc_p->txrx_status&= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
>> + DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
>> + DESC_TXSTS_TXCHECKINSCTRL | \
>> + DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
>> +
>> + desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
>> + desc_p->dmamac_cntl = 0;
>> + desc_p->txrx_status&= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
>> +#else
>> + desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
>> + desc_p->txrx_status = 0;
>> +#endif
>> + }
>> +
>> + /* Correcting the last pointer of the chain */
>> + desc_p->dmamac_next =&desc_table_p[0];
>> +
>> + writel((ulong)&desc_table_p[0],&dma_p->txdesclistaddr);
>> +}
>> +
>> +static void rx_descs_init(struct eth_device *dev)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>> + struct dmamacdescr *desc_table_p =&priv->rx_mac_descrtable[0];
>> + char *rxbuffs =&priv->rxbuffs[0];
>> + struct dmamacdescr *desc_p;
>> +
>> + u32 idx;
>> +
>> + for (idx = 0; idx< CONFIG_RX_DESCR_NUM; idx++) {
>> +
>>
> Remove unnecessary blank lines
OK. would be done in patch-set v2
>> + desc_p =&desc_table_p[idx];
>> + desc_p->dmamac_addr =&rxbuffs[idx * CONFIG_ETH_BUFSIZE];
>> + desc_p->dmamac_next =&desc_table_p[idx + 1];
>> +
>> + desc_p->dmamac_cntl =
>> + (MAC_MAX_FRAME_SZ& DESC_RXCTRL_SIZE1MASK) | \
>> + DESC_RXCTRL_RXCHAIN;
>> +
>> + desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
>> + }
>> +
>> + /* Correcting the last pointer of the chain */
>> + desc_p->dmamac_next =&desc_table_p[0];
>> +
>> + writel((ulong)&desc_table_p[0],&dma_p->rxdesclistaddr);
>> +}
>> +
>> +static void descs_init(struct eth_device *dev)
>> +{
>> + tx_descs_init(dev);
>> + rx_descs_init(dev);
>> +}
>> +
>> +static void mac_reset(struct eth_device *dev)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>> +
>> + u32 timeout = CONFIG_MACRESET_TIMEOUT;
>> +
>> + writel(DMAMAC_SRST,&dma_p->busmode);
>> + writel(MII_PORTSELECT,&mac_p->conf);
>> +
>> + do {
>> + if (!(readl(&dma_p->busmode)& DMAMAC_SRST))
>> + break;
>> + udelay(1000);
>> + } while (timeout--);
>> +}
>> +
>> +static int dw_eth_init(struct eth_device *dev, bd_t *bis)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>> +
>> + u8 *mac_id =&dev->enetaddr[0];
>> + u32 conf, macid_lo, macid_hi;
>> +
>> + /* Reset ethernet hardware */
>> + mac_reset(dev);
>> +
>> + macid_lo = mac_id[0] + (mac_id[1]<< 8) + \
>> + (mac_id[2]<< 16) + (mac_id[3]<< 24);
>> + macid_hi = mac_id[4] + (mac_id[5]<< 8);
>> +
>> + writel(macid_hi,&mac_p->macaddr0hi);
>> + writel(macid_lo,&mac_p->macaddr0lo);
>> +
>>
> Please provide a static function with signature 'static void
> program_mac(struct eth_device *)' for programming the MAC.
Sure
Would be done in v2
>> + writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
>> + &dma_p->busmode);
>> +
>> + writel(FLUSHTXFIFO | readl(&dma_p->opmode),&dma_p->opmode);
>> + writel(STOREFORWARD | TXSECONDFRAME,&dma_p->opmode);
>> +
>> + conf = FRAMEBURSTENABLE | DISABLERXOWN;
>> +
>> + if (priv->speed != SPEED_1000M)
>> + conf |= MII_PORTSELECT;
>> +
>> + if (priv->duplex == FULL_DUPLEX)
>> + conf |= FULLDPLXMODE;
>> +
>> + writel(conf,&mac_p->conf);
>> +
>> + descs_init(dev);
>> +
>> + /*
>> + * Start/Enable xfer at dma as well as mac level
>> + */
>> + writel(readl(&dma_p->opmode) | RXSTART,&dma_p->opmode);
>> + writel(readl(&dma_p->opmode) | TXSTART,&dma_p->opmode);
>> +
>> + writel(readl(&mac_p->conf) | RXENABLE,&mac_p->conf);
>> + writel(readl(&mac_p->conf) | TXENABLE,&mac_p->conf);
>> +
>> + return 0;
>> +}
>> +
>> +static int dw_eth_send(struct eth_device *dev, volatile void *packet,
>> + int length)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + struct eth_dma_regs *dma_p = priv->dma_regs_p;
>> + u32 desc_num = priv->tx_currdescnum;
>> + struct dmamacdescr *desc_p =&priv->tx_mac_descrtable[desc_num];
>> +
>> + /* Check if the descriptor is owned by CPU */
>> + if (desc_p->txrx_status& DESC_TXSTS_OWNBYDMA) {
>> + printf("eth_send : CPU not owner of tx frame\n");
>> + return -1;
>> + }
>> +
>> + memcpy((void *)desc_p->dmamac_addr, (void *)packet, length);
>> +
>> +#if defined(CONFIG_DW_ALTDESC)
>> + desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
>> + desc_p->dmamac_cntl |= (length<< DESC_TXCTRL_SIZE1SHFT)& \
>> + DESC_TXCTRL_SIZE1MASK;
>> +
>> + desc_p->txrx_status&= ~(DESC_TXSTS_MSK);
>> + desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
>> +#else
>> + desc_p->dmamac_cntl |= ((length<< DESC_TXCTRL_SIZE1SHFT)& \
>> + DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
>> + DESC_TXCTRL_TXFIRST;
>> +
>> + desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
>> +#endif
>> +
>> + /* Test the wrap-around condition. */
>> + if (++desc_num>= CONFIG_TX_DESCR_NUM)
>> + desc_num = 0;
>> +
>> + priv->tx_currdescnum = desc_num;
>> +
>> + /* Start the transmission */
>> + writel(POLL_DATA,&dma_p->txpolldemand);
>> +
>> + return 0;
>> +}
>> +
>> +static int dw_eth_recv(struct eth_device *dev)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + u32 desc_num = priv->rx_currdescnum;
>> + struct dmamacdescr *desc_p =&priv->rx_mac_descrtable[desc_num];
>> +
>> + u32 status = desc_p->txrx_status;
>> + int length = 0;
>> +
>> + /* Check if the owner is the CPU */
>> + if (!(status& DESC_RXSTS_OWNBYDMA)) {
>> +
>> + length = (status& DESC_RXSTS_FRMLENMSK)>> \
>> + DESC_RXSTS_FRMLENSHFT;
>> +
>> + NetReceive(desc_p->dmamac_addr, length);
>> +
>> + /*
>> + * Make the current descriptor valid again and go to
>> + * the next one
>> + */
>> + desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
>> +
>> + /* Test the wrap-around condition. */
>> + if (++desc_num>= CONFIG_RX_DESCR_NUM)
>> + desc_num = 0;
>> + }
>> +
>> + priv->rx_currdescnum = desc_num;
>> +
>> + return length;
>> +}
>> +
>> +static void dw_eth_halt(struct eth_device *dev)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> +
>> + mac_reset(dev);
>> + priv->tx_currdescnum = priv->rx_currdescnum = 0;
>> +}
>> +
>> +static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16
>> *val)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
>> + u32 miiaddr;
>> + u32 timeout = CONFIG_MDIO_TIMEOUT;
>> +
>> + miiaddr = ((addr<< MIIADDRSHIFT)& MII_ADDRMSK) | \
>> + ((reg<< MIIREGSHIFT)& MII_REGMSK);
>> +
>> + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY,&mac_p->miiaddr);
>> +
>> + do {
>> + if (!(readl(&mac_p->miiaddr)& MII_BUSY))
>> + break;
>> + udelay(1000);
>> + } while (timeout--);
>> +
>> + *val = readl(&mac_p->miidata);
>> +
>> + return 0;
>> +}
>> +
>> +static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg,
>> u16 val)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + struct eth_mac_regs *mac_p = priv->mac_regs_p;
>> + u32 miiaddr;
>> + u32 timeout = CONFIG_MDIO_TIMEOUT;
>> + u16 value;
>> +
>> + writel(val,&mac_p->miidata);
>> + miiaddr = ((addr<< MIIADDRSHIFT)& MII_ADDRMSK) | \
>> + ((reg<< MIIREGSHIFT)& MII_REGMSK) | MII_WRITE;
>> +
>> + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY,&mac_p->miiaddr);
>> +
>> + do {
>> + if (!(readl(&mac_p->miiaddr)& MII_BUSY))
>> + break;
>> + udelay(1000);
>> + } while (timeout--);
>> +
>> + /* Needed as a fix for ST-Phy */
>> + eth_mdio_read(dev, addr, reg,&value);
>> +
>> + return 0;
>> +}
>> +
>> +static u8 find_phy(struct eth_device *dev)
>> +{
>> + u8 phy_addr = 0;
>> + u16 ctrl, oldctrl;
>> +
>> + do {
>> + eth_mdio_read(dev, phy_addr, PHY_BMCR,&ctrl);
>> + oldctrl = ctrl& PHY_BMCR_AUTON;
>> +
>> + ctrl ^= PHY_BMCR_AUTON;
>> + eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
>> + eth_mdio_read(dev, phy_addr, PHY_BMCR,&ctrl);
>> + ctrl&= PHY_BMCR_AUTON;
>> +
>> + if (ctrl == oldctrl) {
>> + phy_addr++;
>> + } else {
>> + ctrl ^= PHY_BMCR_AUTON;
>> + eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
>> + break;
>> + }
>> + } while (phy_addr< 32);
>> +
>> + return phy_addr;
>> +}
>> +
>> +static void dw_reset_phy(struct eth_device *dev)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + u16 ctrl;
>> + u32 timeout = CONFIG_PHYRESET_TIMEOUT;
>> + u32 phy_addr = priv->address;
>> +
>> + eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET);
>> + do {
>> + eth_mdio_read(dev, phy_addr, PHY_BMCR,&ctrl);
>> + if (!(ctrl& PHY_BMCR_RESET))
>> + break;
>> + udelay(1000);
>> + } while (timeout--);
>> +
>> +#ifdef CONFIG_PHY_RESET_DELAY
>> + udelay(CONFIG_PHY_RESET_DELAY);
>> +#endif
>> +}
>> +
>> +static void configure_phy(struct eth_device *dev)
>> +{
>> + struct dw_eth_dev *priv = dev->priv;
>> + u8 phy_addr;
>> + u16 bmcr, ctrl;
>> +#if defined(CONFIG_DW_AUTONEG)
>> + u16 bmsr;
>> + u32 timeout;
>> + u16 anlpar, btsr;
>> +#endif
>> + priv->address = find_phy(dev);
>> + phy_addr = priv->address;
>> +
>> + dw_reset_phy(dev);
>> +
>> +#if defined(CONFIG_DW_AUTONEG)
>> + bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \
>> + PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS;
>> +#else
>> + bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX;
>> +
>> +#if defined(CONFIG_DW_SPEED10M)
>> + bmcr&= ~PHY_BMCR_100MB;
>> +#endif
>> +#if defined(CONFIG_DW_DUPLEXHALF)
>> + bmcr&= ~PHY_BMCR_DPLX;
>> +#endif
>> +#endif
>> + eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr);
>> +
>> + /* Read the phy status register and populate priv structure */
>> +#if defined(CONFIG_DW_AUTONEG)
>> + timeout = CONFIG_AUTONEG_TIMEOUT;
>> + do {
>> + eth_mdio_read(dev, phy_addr, PHY_BMSR,&bmsr);
>> + if (bmsr& PHY_BMSR_AUTN_COMP)
>> + break;
>> + udelay(1000);
>> + } while (timeout--);
>> +
>> + eth_mdio_read(dev, phy_addr, PHY_ANLPAR,&anlpar);
>> + eth_mdio_read(dev, phy_addr, PHY_1000BTSR,&btsr);
>> +
>> + if (btsr& (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
>> + priv->speed = SPEED_1000M;
>> + if (btsr& PHY_1000BTSR_1000FD)
>> + priv->duplex = FULL_DUPLEX;
>> + else
>> + priv->duplex = HALF_DUPLEX;
>> + } else {
>> + if (anlpar& PHY_ANLPAR_100)
>> + priv->speed = SPEED_100M;
>> + else
>> + priv->speed = SPEED_10M;
>> +
>> + if (anlpar& (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
>> + priv->duplex = FULL_DUPLEX;
>> + else
>> + priv->duplex = HALF_DUPLEX;
>> + }
>> +#else
>> + eth_mdio_read(dev, phy_addr, PHY_BMCR,&ctrl);
>> +
>> + if (ctrl& PHY_BMCR_DPLX)
>> + priv->duplex = FULL_DUPLEX;
>> + else
>> + priv->duplex = HALF_DUPLEX;
>> +
>> + if (ctrl& PHY_BMCR_1000_MBPS)
>> + priv->speed = SPEED_1000M;
>> + else if (ctrl& PHY_BMCR_100_MBPS)
>> + priv->speed = SPEED_100M;
>> + else
>> + priv->speed = SPEED_10M;
>> +#endif
>> +}
>> +
>> +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
>> +static int dw_mii_read(char *devname, u8 addr, u8 reg, u16 *val)
>> +{
>> + struct eth_device *netdev;
>> +
>> + netdev = eth_get_dev_by_name(devname);
>> + if (netdev)
>> + eth_mdio_read(netdev, addr, reg, val);
>> +
>> + return 0;
>> +}
>> +
>> +static int dw_mii_write(char *devname, u8 addr, u8 reg, u16 val)
>> +{
>> + struct eth_device *netdev;
>> +
>> + netdev = eth_get_dev_by_name(devname);
>> + if (netdev)
>> + eth_mdio_write(netdev, addr, reg, val);
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> +int dw_mii_initialize(u32 id, ulong base_addr)
>>
> Please use the same name in this function as the driver name. We
> usually reserve 'mii' for device control plane.
OK. I would change that to dw_initialize
>> +{
>> + struct eth_device *netdev;
>>
> I'd prefer if you named this variable 'dev', since 'netdev' is the name
> of a header file that's unrelated. Apply globally.
OK. I would change that to dev
>> + struct dw_eth_dev *priv;
>> +
>> + netdev = (struct eth_device *) malloc(sizeof(struct eth_device));
>> + if (!netdev)
>> + return -ENOMEM;
>> +
>> + /*
>> + * Since the priv structure contains the descriptors which need a
>> strict
>> + * buswidth alignment, memalign is used to allocate memory
>> + */
>> + priv = (struct dw_eth_dev *) memalign(16, sizeof(struct
>> dw_eth_dev));
>> + if (!priv) {
>> + free(netdev);
>> + return -ENOMEM;
>> + }
>> +
>> + memset(netdev, 0, sizeof(struct eth_device));
>> + memset(priv, 0, sizeof(struct dw_eth_dev));
>> +
>> + sprintf(netdev->name, "mii%d", id);
>> + netdev->iobase = (int)base_addr;
>> + netdev->priv = priv;
>>
> If you wait a couple of days until I resubmit my change to the
> 'eth_device' struct, you can put in a pointer to the MAC programming
> function and not have to worry about that any more.
Sure, I would wait rebase over that patch and submit my patch v2
>> +
>> + eth_getenv_enetaddr_by_index(id,&netdev->enetaddr[0]);
>> +
>> + priv->dev = netdev;
>> + priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
>> + priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
>> + DW_DMA_BASE_OFFSET);
>> +
>> + mac_reset(netdev);
>> + configure_phy(netdev);
>> +
>> + netdev->init = dw_eth_init;
>> + netdev->send = dw_eth_send;
>> + netdev->recv = dw_eth_recv;
>> + netdev->halt = dw_eth_halt;
>> +
>> + eth_register(netdev);
>> +
>> +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
>> + miiphy_register(netdev->name, dw_mii_read, dw_mii_write);
>> +#endif
>> + return 0;
>>
> This should return 1 on success.
Ah, OK
I would change that.
>> +}
>> diff --git a/drivers/net/dw_eth.h b/drivers/net/dw_eth.h
>> new file mode 100644
>> index 0000000..068211a
>> --- /dev/null
>> +++ b/drivers/net/dw_eth.h
>> @@ -0,0 +1,281 @@
>> +/*
>> + * (C) Copyright 2009
>> + * Vipin Kumar, ST Micoelectronics, vipin.kumar at st.com.
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#ifndef _DW_ETH_H
>> +#define _DW_ETH_H
>> +
>> +#define CONFIG_TX_DESCR_NUM 16
>> +#define CONFIG_RX_DESCR_NUM 16
>> +#define CONFIG_ETH_BUFSIZE 2048
>> +#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
>> +#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
>> +
>> +#define CONFIG_MACRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
>> +#define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ)
>> +#define CONFIG_PHYRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
>> +#define CONFIG_AUTONEG_TIMEOUT (5 * CONFIG_SYS_HZ)
>> +
>> +struct eth_mac_regs {
>> + u32 conf; /* 0x00 */
>> + u32 framefilt; /* 0x04 */
>> + u32 hashtablehigh; /* 0x08 */
>> + u32 hashtablelow; /* 0x0c */
>> + u32 miiaddr; /* 0x10 */
>> + u32 miidata; /* 0x14 */
>> + u32 flowcontrol; /* 0x18 */
>> + u32 vlantag; /* 0x1c */
>> + u32 version; /* 0x20 */
>> + u8 reserved_1[0x38 - 0x24];
>> + u32 intreg; /* 0x38 */
>> + u32 intmask; /* 0x3c */
>> + u32 macaddr0hi; /* 0x40 */
>> + u32 macaddr0lo; /* 0x44 */
>> +};
>> +
>> +/* MAC configuration register definitions */
>> +#define FRAMEBURSTENABLE (1<< 21)
>> +#define MII_PORTSELECT (1<< 15)
>> +#define FES_100 (1<< 14)
>> +#define DISABLERXOWN (1<< 13)
>> +#define FULLDPLXMODE (1<< 11)
>> +#define RXENABLE (1<< 2)
>> +#define TXENABLE (1<< 3)
>> +
>> +/* MII address register definitions */
>> +#define MII_BUSY (1<< 0)
>> +#define MII_WRITE (1<< 1)
>> +#define MII_CLKRANGE_60_100M (0)
>> +#define MII_CLKRANGE_100_150M (0x4)
>> +#define MII_CLKRANGE_20_35M (0x8)
>> +#define MII_CLKRANGE_35_60M (0xC)
>> +#define MII_CLKRANGE_150_250M (0x10)
>> +#define MII_CLKRANGE_250_300M (0x14)
>> +
>> +#define MIIADDRSHIFT (11)
>> +#define MIIREGSHIFT (6)
>> +#define MII_REGMSK (0x1F<< 6)
>> +#define MII_ADDRMSK (0x1F<< 11)
>> +
>> +
>> +struct eth_dma_regs {
>> + u32 busmode; /* 0x00 */
>> + u32 txpolldemand; /* 0x04 */
>> + u32 rxpolldemand; /* 0x08 */
>> + u32 rxdesclistaddr; /* 0x0c */
>> + u32 txdesclistaddr; /* 0x10 */
>> + u32 status; /* 0x14 */
>> + u32 opmode; /* 0x18 */
>> + u32 intenable; /* 0x1c */
>> + u8 reserved[0x48 - 0x20];
>> + u32 currhosttxdesc; /* 0x48 */
>> + u32 currhostrxdesc; /* 0x4c */
>> + u32 currhosttxbuffaddr; /* 0x50 */
>> + u32 currhostrxbuffaddr; /* 0x54 */
>> +};
>> +
>> +#define DW_DMA_BASE_OFFSET (0x1000)
>> +
>> +/* Bus mode register definitions */
>> +#define FIXEDBURST (1<< 16)
>> +#define PRIORXTX_41 (3<< 14)
>> +#define PRIORXTX_31 (2<< 14)
>> +#define PRIORXTX_21 (1<< 14)
>> +#define PRIORXTX_11 (0<< 14)
>> +#define BURST_1 (1<< 8)
>> +#define BURST_2 (2<< 8)
>> +#define BURST_4 (4<< 8)
>> +#define BURST_8 (8<< 8)
>> +#define BURST_16 (16<< 8)
>> +#define BURST_32 (32<< 8)
>> +#define RXHIGHPRIO (1<< 1)
>> +#define DMAMAC_SRST (1<< 0)
>> +
>> +/* Poll demand definitions */
>> +#define POLL_DATA (0xFFFFFFFF)
>> +
>> +/* Operation mode definitions */
>> +#define STOREFORWARD (1<< 21)
>> +#define FLUSHTXFIFO (1<< 20)
>> +#define TXSTART (1<< 13)
>> +#define TXSECONDFRAME (1<< 2)
>> +#define RXSTART (1<< 1)
>> +
>> +/* Descriptior related definitions */
>> +#define MAC_MAX_FRAME_SZ (2048)
>> +
>> +struct dmamacdescr {
>> + u32 txrx_status;
>> + u32 dmamac_cntl;
>> + void *dmamac_addr;
>> + struct dmamacdescr *dmamac_next;
>> +};
>> +
>> +/*
>> + * txrx_status definitions
>> + */
>> +
>> +/* tx status bits definitions */
>> +#if defined(CONFIG_DW_ALTDESC)
>> +
>> +#define DESC_TXSTS_OWNBYDMA (1<< 31)
>> +#define DESC_TXSTS_TXINT (1<< 30)
>> +#define DESC_TXSTS_TXLAST (1<< 29)
>> +#define DESC_TXSTS_TXFIRST (1<< 28)
>> +#define DESC_TXSTS_TXCRCDIS (1<< 27)
>> +
>> +#define DESC_TXSTS_TXPADDIS (1<< 26)
>> +#define DESC_TXSTS_TXCHECKINSCTRL (3<< 22)
>> +#define DESC_TXSTS_TXRINGEND (1<< 21)
>> +#define DESC_TXSTS_TXCHAIN (1<< 20)
>> +#define DESC_TXSTS_MSK (0x1FFFF<< 0)
>> +
>> +#else
>> +
>> +#define DESC_TXSTS_OWNBYDMA (1<< 31)
>> +#define DESC_TXSTS_MSK (0x1FFFF<< 0)
>> +
>> +#endif
>> +
>> +/* rx status bits definitions */
>> +#define DESC_RXSTS_OWNBYDMA (1<< 31)
>> +#define DESC_RXSTS_DAFILTERFAIL (1<< 30)
>> +#define DESC_RXSTS_FRMLENMSK (0x3FFF<< 16)
>> +#define DESC_RXSTS_FRMLENSHFT (16)
>> +
>> +#define DESC_RXSTS_ERROR (1<< 15)
>> +#define DESC_RXSTS_RXTRUNCATED (1<< 14)
>> +#define DESC_RXSTS_SAFILTERFAIL (1<< 13)
>> +#define DESC_RXSTS_RXIPC_GIANTFRAME (1<< 12)
>> +#define DESC_RXSTS_RXDAMAGED (1<< 11)
>> +#define DESC_RXSTS_RXVLANTAG (1<< 10)
>> +#define DESC_RXSTS_RXFIRST (1<< 9)
>> +#define DESC_RXSTS_RXLAST (1<< 8)
>> +#define DESC_RXSTS_RXIPC_GIANT (1<< 7)
>> +#define DESC_RXSTS_RXCOLLISION (1<< 6)
>> +#define DESC_RXSTS_RXFRAMEETHER (1<< 5)
>> +#define DESC_RXSTS_RXWATCHDOG (1<< 4)
>> +#define DESC_RXSTS_RXMIIERROR (1<< 3)
>> +#define DESC_RXSTS_RXDRIBBLING (1<< 2)
>> +#define DESC_RXSTS_RXCRC (1<< 1)
>> +
>> +/*
>> + * dmamac_cntl definitions
>> + */
>> +
>> +/* tx control bits definitions */
>> +#if defined(CONFIG_DW_ALTDESC)
>> +
>> +#define DESC_TXCTRL_SIZE1MASK (0x1FFF<< 0)
>> +#define DESC_TXCTRL_SIZE1SHFT (0)
>> +#define DESC_TXCTRL_SIZE2MASK (0x1FFF<< 16)
>> +#define DESC_TXCTRL_SIZE2SHFT (16)
>> +
>> +#else
>> +
>> +#define DESC_TXCTRL_TXINT (1<< 31)
>> +#define DESC_TXCTRL_TXLAST (1<< 30)
>> +#define DESC_TXCTRL_TXFIRST (1<< 29)
>> +#define DESC_TXCTRL_TXCHECKINSCTRL (3<< 27)
>> +#define DESC_TXCTRL_TXCRCDIS (1<< 26)
>> +#define DESC_TXCTRL_TXRINGEND (1<< 25)
>> +#define DESC_TXCTRL_TXCHAIN (1<< 24)
>> +
>> +#define DESC_TXCTRL_SIZE1MASK (0x7FF<< 0)
>> +#define DESC_TXCTRL_SIZE1SHFT (0)
>> +#define DESC_TXCTRL_SIZE2MASK (0x7FF<< 11)
>> +#define DESC_TXCTRL_SIZE2SHFT (11)
>> +
>> +#endif
>> +
>> +/* rx control bits definitions */
>> +#if defined(CONFIG_DW_ALTDESC)
>> +
>> +#define DESC_RXCTRL_RXINTDIS (1<< 31)
>> +#define DESC_RXCTRL_RXRINGEND (1<< 15)
>> +#define DESC_RXCTRL_RXCHAIN (1<< 14)
>> +
>> +#define DESC_RXCTRL_SIZE1MASK (0x1FFF<< 0)
>> +#define DESC_RXCTRL_SIZE1SHFT (0)
>> +#define DESC_RXCTRL_SIZE2MASK (0x1FFF<< 16)
>> +#define DESC_RXCTRL_SIZE2SHFT (16)
>> +
>> +#else
>> +
>> +#define DESC_RXCTRL_RXINTDIS (1<< 31)
>> +#define DESC_RXCTRL_RXRINGEND (1<< 25)
>> +#define DESC_RXCTRL_RXCHAIN (1<< 24)
>> +
>> +#define DESC_RXCTRL_SIZE1MASK (0x7FF<< 0)
>> +#define DESC_RXCTRL_SIZE1SHFT (0)
>> +#define DESC_RXCTRL_SIZE2MASK (0x7FF<< 11)
>> +#define DESC_RXCTRL_SIZE2SHFT (11)
>> +
>> +#endif
>> +
>> +/*
>> + * dmamac_addr definitions
>> + */
>> +
>> +/* tx addr register bits definitions */
>> +
>> +/* rx addr register bits definitions */
>> +
>>
> Something's missing here...
Actually no, these are the addresses part of the descriptors so any bit
doesn't have any special meaning.
Probably I can remove it altogather in v2
>> +
>> +/*
>> + * dmamac_next definitions
>> + */
>> +
>> +/* tx next register bits definitions */
>> +
>> +/* rx next register bits definitions */
>> +
>> +struct dw_eth_dev {
>> + u32 address;
>> + u32 speed;
>> + u32 duplex;
>> + u32 tx_currdescnum;
>> + u32 rx_currdescnum;
>> + u32 padding;
>> +
>> + struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
>> + struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
>> +
>> + char txbuffs[TX_TOTAL_BUFSIZE];
>> + char rxbuffs[RX_TOTAL_BUFSIZE];
>> +
>> + struct eth_mac_regs *mac_regs_p;
>> + struct eth_dma_regs *dma_regs_p;
>> +
>> + struct eth_device *dev;
>> +} __attribute__ ((aligned(8)));
>> +
>> +/* Speed specific definitions */
>> +#define SPEED_10M 1
>> +#define SPEED_100M 2
>> +#define SPEED_1000M 3
>> +
>> +/* Duplex mode specific definitions */
>> +#define HALF_DUPLEX 1
>> +#define FULL_DUPLEX 2
>> +
>> +#endif
>> diff --git a/include/netdev.h b/include/netdev.h
>> index 1dd80f0..460889c 100644
>> --- a/include/netdev.h
>> +++ b/include/netdev.h
>> @@ -79,6 +79,7 @@ int scc_initialize(bd_t *bis);
>> int skge_initialize(bd_t *bis);
>> int smc911x_initialize(u8 dev_num, int base_addr);
>> int smc91111_initialize(u8 dev_num, int base_addr);
>> +int dw_mii_initialize(u32 id, ulong base_addr);
>>
> alphabetical order, please.
Sure
>> int tsi108_eth_initialize(bd_t *bis);
>> int uec_initialize(int index);
>> int uec_standard_init(bd_t *bis);
>>
>
> Overall, a very good first pass.
>
Thanks. So, I am just waiting for a patch submission from you over which
I would rebase and send my patch v2 incorporating all above changes
> thanks,
> Ben
>
Regards,
Vipin
More information about the U-Boot
mailing list