[U-Boot] [PATCH RFC v2] OMAP: mmc: add support for second and third mmc channels

[Steve Sakoman]

This patch adds support for the second and third mmc channels on OMAP3
processors

Boards wishing to use this feature should define CONFIG_SYS_MMC_SET_DEV

Tested on Overo

Signed-off-by: Steve Sakoman <steve at sakoman.com>
---

diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h
b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
index aa751c9..f081b43 100644
--- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
@@ -31,11 +31,18 @@
 typedef struct t2 {
 	unsigned char res1[0x274];
 	unsigned int devconf0;		/* 0x274 */
-	unsigned char res2[0x2A8];
+	unsigned char res2[0x060];
+	unsigned int devconf1;		/* 0x2D8 */
+	unsigned char res3[0x244];
 	unsigned int pbias_lite;	/* 0x520 */
 } t2_t;

 #define MMCSDIO1ADPCLKISEL		(1 << 24)
+#define MMCSDIO2ADPCLKISEL		(1 << 6)
+
+#define EN_MMC1				(1 << 24)
+#define EN_MMC2				(1 << 25)
+#define EN_MMC3				(1 << 30)

 #define PBIASLITEPWRDNZ0		(1 << 1)
 #define PBIASSPEEDCTRL0			(1 << 2)
@@ -44,7 +51,9 @@ typedef struct t2 {
 /*
  * OMAP HSMMC register definitions
  */
-#define OMAP_HSMMC_BASE		0x4809C000
+#define OMAP_HSMMC1_BASE	0x4809C000
+#define OMAP_HSMMC2_BASE	0x480B4000
+#define OMAP_HSMMC3_BASE	0x480AD000

 typedef struct hsmmc {
 	unsigned char res1[0x10];
diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c
index 96c0e65..bf650ba 100644
--- a/drivers/mmc/omap3_mmc.c
+++ b/drivers/mmc/omap3_mmc.c
@@ -52,7 +52,27 @@ const unsigned short mmc_transspeed_val[15][4] = {

 mmc_card_data cur_card_data;
 static block_dev_desc_t mmc_blk_dev;
-static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC_BASE;
+static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
+
+unsigned char mmc_set_dev(int dev)
+{
+	switch (dev) {
+	case 1:
+		mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
+		break;
+	case 2:
+		mmc_base = (hsmmc_t *)OMAP_HSMMC2_BASE;
+		break;
+	case 3:
+		mmc_base = (hsmmc_t *)OMAP_HSMMC3_BASE;
+		break;
+	default:
+		mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
+		return 1;
+	}
+
+	return 0;
+}

 block_dev_desc_t *mmc_get_dev(int dev)
 {
@@ -62,6 +82,7 @@ block_dev_desc_t *mmc_get_dev(int dev)
 unsigned char mmc_board_init(void)
 {
 	t2_t *t2_base = (t2_t *)T2_BASE;
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;

 #if defined(CONFIG_TWL4030_POWER)
 	twl4030_power_mmc_init();
@@ -74,6 +95,17 @@ unsigned char mmc_board_init(void)
 	writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
 		&t2_base->devconf0);

+	writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL,
+		&t2_base->devconf1);
+
+	writel(readl(&prcm_base->fclken1_core) |
+		EN_MMC1 | EN_MMC2 | EN_MMC3,
+		&prcm_base->fclken1_core);
+
+	writel(readl(&prcm_base->iclken1_core) |
+		EN_MMC1 | EN_MMC2 | EN_MMC3,
+		&prcm_base->iclken1_core);
+
 	return 1;
 }

@@ -512,8 +544,11 @@ unsigned long mmc_bread(int dev_num, unsigned
long blknr, lbaint_t blkcnt,
 	return 1;
 }

-int mmc_legacy_init(int verbose)
+int mmc_legacy_init(int dev)
 {
+	if (mmc_set_dev(dev) != 0)
+		return 1;
+
 	if (configure_mmc(&cur_card_data) != 1)
 		return 1;