[U-Boot] [PATCH 1/4] microblaze: Fix microblaze-generic config file
Michal Simek
monstr at monstr.eu
Mon Aug 2 14:49:34 CEST 2010
1. Fix preprocessor statements
2. Clean coding style
Signed-off-by: Michal Simek <monstr at monstr.eu>
---
include/configs/microblaze-generic.h | 227 ++++++++++++++++++----------------
1 files changed, 123 insertions(+), 104 deletions(-)
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 28cee47..9301a6b 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007-2008 Michal Simek
+ * (C) Copyright 2007-2010 Michal Simek
*
* Michal SIMEK <monstr at monstr.eu>
*
@@ -27,31 +27,33 @@
#include "../board/xilinx/microblaze-generic/xparameters.h"
-#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
+/* MicroBlaze CPU */
+#define CONFIG_MICROBLAZE 1
#define MICROBLAZE_V5 1
/* uart */
#ifdef XILINX_UARTLITE_BASEADDR
- #define CONFIG_XILINX_UARTLITE
- #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
- #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
- #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
- #define CONSOLE_ARG "console=console=ttyUL0,115200\0"
+# define CONFIG_XILINX_UARTLITE
+# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
+# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
+# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
#elif XILINX_UART16550_BASEADDR
- #define CONFIG_SYS_NS16550 1
- #define CONFIG_SYS_NS16550_SERIAL
- #define CONFIG_SYS_NS16550_REG_SIZE -4
- #define CONFIG_CONS_INDEX 1
- #define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
- #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
- #define CONFIG_BAUDRATE 115200
-
- /* The following table includes the supported baudrates */
- #define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
- #define CONSOLE_ARG "console=console=ttyS0,115200\0"
+# define CONFIG_SYS_NS16550 1
+# define CONFIG_SYS_NS16550_SERIAL
+# define CONFIG_SYS_NS16550_REG_SIZE -4
+# define CONFIG_CONS_INDEX 1
+# define CONFIG_SYS_NS16550_COM1 \
+ (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
+# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+# define CONFIG_BAUDRATE 115200
+
+/* The following table includes the supported baudrates */
+# define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+# define CONSOLE_ARG "console=console=ttyS0,115200\0"
#else
- #error Undefined uart
+# error Undefined uart
#endif
/* setting reset address */
@@ -59,41 +61,41 @@
/* ethernet */
#ifdef XILINX_EMACLITE_BASEADDR
- #define CONFIG_XILINX_EMACLITE 1
- #define CONFIG_SYS_ENET
+# define CONFIG_XILINX_EMACLITE 1
+# define CONFIG_SYS_ENET
#elif XILINX_LLTEMAC_BASEADDR
- #define CONFIG_XILINX_LL_TEMAC 1
- #define CONFIG_SYS_ENET
+# define CONFIG_XILINX_LL_TEMAC 1
+# define CONFIG_SYS_ENET
#endif
#undef ET_DEBUG
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
- #define CONFIG_SYS_GPIO_0 1
- #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+# define CONFIG_SYS_GPIO_0 1
+# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
/* interrupt controller */
#ifdef XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0 1
- #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
+# define CONFIG_SYS_INTC_0 1
+# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
+# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
#endif
/* timer */
#ifdef XILINX_TIMER_BASEADDR
- #if (XILINX_TIMER_IRQ != -1)
- #define CONFIG_SYS_TIMER_0 1
- #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
- #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
- #define FREQUENCE XILINX_CLOCK_FREQ
- #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
- #endif
+# if (XILINX_TIMER_IRQ != -1)
+# define CONFIG_SYS_TIMER_0 1
+# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
+# define FREQUENCE XILINX_CLOCK_FREQ
+# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+# endif
#elif XILINX_CLOCK_FREQ
- #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
+# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
#else
- #error BAD CLOCK FREQ
+# error BAD CLOCK FREQ
#endif
/* FSL */
/* #define CONFIG_SYS_FSL_2 */
@@ -135,15 +137,20 @@
/* global pointer */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size of global data */
/* start of global data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+ (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE \
+ - CONFIG_SYS_GBL_DATA_SIZE)
/* monitor code */
-#define SIZE 0x40000
+#define SIZE 0x40000
#define CONFIG_SYS_MONITOR_LEN (SIZE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MONITOR_BASE \
+ (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MONITOR_END \
+ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_MALLOC_LEN SIZE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_BASE \
+ (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
/* stack */
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE
@@ -152,55 +159,62 @@
#define FLASH
#ifdef FLASH
- #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
- #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
- #define CONFIG_SYS_FLASH_CFI 1
- #define CONFIG_FLASH_CFI_DRIVER 1
- #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */
- #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
- #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
- #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
-
- #ifdef RAMENV
- #define CONFIG_ENV_IS_NOWHERE 1
- #define CONFIG_ENV_SIZE 0x1000
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
- #else /* !RAMENV */
- #define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
- #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
- #define CONFIG_ENV_SIZE 0x20000
- #endif /* !RAMBOOT */
+# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
+# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
+# define CONFIG_SYS_FLASH_CFI 1
+# define CONFIG_FLASH_CFI_DRIVER 1
+/* ?empty sector */
+# define CONFIG_SYS_FLASH_EMPTY_INFO 1
+/* max number of memory banks */
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+/* max number of sectors on one chip */
+# define CONFIG_SYS_MAX_FLASH_SECT 512
+/* hardware flash protection */
+# define CONFIG_SYS_FLASH_PROTECTION
+
+# ifdef RAMENV
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+
+# else /* !RAMENV */
+# define CONFIG_ENV_IS_IN_FLASH 1
+/* 128K(one sector) for env */
+# define CONFIG_ENV_SECT_SIZE 0x20000
+# define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+# define CONFIG_ENV_SIZE 0x20000
+# endif /* !RAMBOOT */
#else /* !FLASH */
- /* ENV in RAM */
- #define CONFIG_SYS_NO_FLASH 1
- #define CONFIG_ENV_IS_NOWHERE 1
- #define CONFIG_ENV_SIZE 0x1000
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
- #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
+/* ENV in RAM */
+# define CONFIG_SYS_NO_FLASH 1
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+/* hardware flash protection */
+# define CONFIG_SYS_FLASH_PROTECTION
#endif /* !FLASH */
/* system ace */
#ifdef XILINX_SYSACE_BASEADDR
- #define CONFIG_SYSTEMACE
- /* #define DEBUG_SYSTEMACE */
- #define SYSTEMACE_CONFIG_FPGA
- #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
- #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
- #define CONFIG_DOS_PARTITION
+# define CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+# define SYSTEMACE_CONFIG_FPGA
+# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+# define CONFIG_DOS_PARTITION
#endif
#if defined(XILINX_USE_ICACHE)
- #define CONFIG_ICACHE
+# define CONFIG_ICACHE
#else
- #undef CONFIG_ICACHE
+# undef CONFIG_ICACHE
#endif
#if defined(XILINX_USE_DCACHE)
- #define CONFIG_DCACHE
+# define CONFIG_DCACHE
#else
- #undef CONFIG_DCACHE
+# undef CONFIG_DCACHE
#endif
/*
@@ -222,37 +236,37 @@
#define CONFIG_CMD_ECHO
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
- #define CONFIG_CMD_CACHE
+# define CONFIG_CMD_CACHE
#else
- #undef CONFIG_CMD_CACHE
+# undef CONFIG_CMD_CACHE
#endif
#ifndef CONFIG_SYS_ENET
- #undef CONFIG_CMD_NET
+# undef CONFIG_CMD_NET
#else
- #define CONFIG_CMD_PING
- #define CONFIG_CMD_DHCP
+# define CONFIG_CMD_PING
+# define CONFIG_CMD_DHCP
#endif
#if defined(CONFIG_SYSTEMACE)
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_CMD_FAT
#endif
#if defined(FLASH)
- #define CONFIG_CMD_ECHO
- #define CONFIG_CMD_FLASH
- #define CONFIG_CMD_IMLS
- #define CONFIG_CMD_JFFS2
-
- #if !defined(RAMENV)
- #define CONFIG_CMD_SAVEENV
- #define CONFIG_CMD_SAVES
- #endif
+# define CONFIG_CMD_ECHO
+# define CONFIG_CMD_FLASH
+# define CONFIG_CMD_IMLS
+# define CONFIG_CMD_JFFS2
+
+# if !defined(RAMENV)
+# define CONFIG_CMD_SAVEENV
+# define CONFIG_CMD_SAVES
+# endif
#else
- #undef CONFIG_CMD_IMLS
- #undef CONFIG_CMD_FLASH
- #undef CONFIG_CMD_JFFS2
+# undef CONFIG_CMD_IMLS
+# undef CONFIG_CMD_FLASH
+# undef CONFIG_CMD_JFFS2
#endif
#if defined(CONFIG_CMD_JFFS2)
@@ -270,11 +284,16 @@
/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT "U-Boot-mONStR> "
-#define CONFIG_SYS_CBSIZE 512 /* size of console buffer */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
-#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
+/* size of console buffer */
+#define CONFIG_SYS_CBSIZE 512
+ /* print buffer size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 15
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START
#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
#define CONFIG_BOOTARGS "root=romfs"
@@ -291,7 +310,7 @@
#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
-#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
+#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
"nor0=flash-0\0"\
"mtdparts=mtdparts=flash-0:"\
"256k(u-boot),256k(env),3m(kernel),"\
@@ -302,7 +321,7 @@
/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+# define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif
#endif /* __CONFIG_H */
--
1.5.5.6
More information about the U-Boot
mailing list