August 2010 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Aug 1 10:10:41 CEST 2010
Ending: Tue Aug 31 23:48:04 CEST 2010
Messages: 1816

• [U-Boot] [PATCH] board/purple/flash.c: removed unneded variable   Frans Meulenbroeks
• [U-Boot] [PATCH] board/purple/flash.c: removed unneded variable   Sergei Shtylyov
• [U-Boot] [PATCH 4/5] usb_storage.c: change progress output in debug() message   Remy Bohmer
• [U-Boot] [PATCH 1/5] usb_storage.c: initialize device type   Remy Bohmer
• [U-Boot] [PATCH 22/28] SPEAr : High speed support for designware peripheral   Remy Bohmer
• [U-Boot] [PATCH 12/28] SPEAr : USB Device Controller driver support added   Remy Bohmer
• [U-Boot] [PATCH 17/28] SPEAr : USB device controller bugfixes   Remy Bohmer
• [U-Boot] [PATCH 3/4 v2] musb: am35x: Workaround for fifo read issue   Remy Bohmer
• [U-Boot] [PATCH 2/4 v2] musb: MSC host support for AM35x   Remy Bohmer
• [U-Boot] [PATCH] board/purple/flash.c: removed unneded variable   Frans Meulenbroeks
• [U-Boot] gcc optimizing option cause printf() and others crash.why?   yaojin liu
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert ARIBAUD
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH 2/4 v2] musb: MSC host support for AM35x   Gupta, Ajay Kumar
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert ARIBAUD
• [U-Boot] [PATCH] Fix compile warnings for const correctness   Ben Warren
• [U-Boot] [PATCH V5 0/3] Add support for MB86R0x SoCs   Matthias Weisser
• [U-Boot] [PATCH V5 1/3] arm: Add support for MB86R0x SoCs   Matthias Weisser
• [U-Boot] [PATCH V5 2/3] video: add support for display controller in MB86R0x SoCs   Matthias Weisser
• [U-Boot] [PATCH V5 3/3] arm: Add support for jadecpu board based on MB86R01 SoC   Matthias Weisser
• [U-Boot] How to support Page Mode Flash Memory Device?   Cheng Vincent
• [U-Boot] AVR32 support   Bas Mevissen
• [U-Boot] [PATCH 0/4 v2] AM35X: Add musb support   Remy Bohmer
• [U-Boot] AVR32 support   Reinhard Meyer
• [U-Boot] How to support Page Mode Flash Memory Device?   Stefan Roese
• [U-Boot] U-Boot: U-Boot 2010.06 doesn't boot from NAND Flash on AMCC Sequoia   Stefan Roese
• [U-Boot] [PATCH 0/3] avr32 fixes   Haavard Skinnemoen
• [U-Boot] [PATCH 1/3] avr32: Add missing asm/unaligned.h header file   Haavard Skinnemoen
• [U-Boot] [PATCH 2/3] avr32: Print unrelocated PC on exception   Haavard Skinnemoen
• [U-Boot] [PATCH 3/3] avr32: Add simple paging support   Haavard Skinnemoen
• [U-Boot] [PATCH 0/3] avr32 fixes   Bas Mevissen
• [U-Boot] AVR32 support   Bas Mevissen
• [U-Boot] [PATCH 0/3] avr32 fixes   Haavard Skinnemoen
• [U-Boot] [PATCH 1/4] microblaze: Fix microblaze-generic config file   Michal Simek
• [U-Boot] [PATCH 2/4] net: Move Emaclite to NET_MULTI   Michal Simek
• [U-Boot] [PATCH 3/4] microblaze: Add support for NET_MULTI api   Michal Simek
• [U-Boot] [PATCH 4/4] net: Add LL TEMAC driver to u-boot   Michal Simek
• [U-Boot] Katmai flash configuration   Stefan Roese
• [U-Boot] Please pull u-boot-mpc85xx.git   Timur Tabi
• [U-Boot] [PATCH 3/3] avr32: Add simple paging support   Andreas Bießmann
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Timur Tabi
• [U-Boot] [PATCH] update the MIPS u-boot.lds   Xiangfu Liu
• [U-Boot] [PATCH] always relocate fdt into an lmb-allocated memory block   Timur Tabi
• [U-Boot] [PATCH 0/3] avr32 fixes   Bas Mevissen
• [U-Boot] [PATCH] always relocate fdt into an lmb-allocated memory block   Kumar Gala
• [U-Boot] at91sam source tree to use   Moises Beck
• [U-Boot] [PATCH] fsl: verify writes to the MAC address EEPROM   Timur Tabi
• [U-Boot] Please pull u-boot-mpc85xx.git   Ben Warren
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH] always relocate fdt into an lmb-allocated memory block   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Timur Tabi
• [U-Boot] [PATCH] fsl: verify writes to the MAC address EEPROM   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH] fsl: verify writes to the MAC address EEPROM   Timur Tabi
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Ben Warren
• [U-Boot] [PATCH] fsl: verify writes to the MAC address EEPROM   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Timur Tabi
• [U-Boot] [PATCH] fsl: verify writes to the MAC address EEPROM   Timur Tabi
• [U-Boot] [PATCH 0/3] avr32 fixes   Bas Mevissen
• [U-Boot] [PATCH] fsl: verify writes to the MAC address EEPROM   Wolfgang Denk
• [U-Boot] [PATCH] fsl: verify writes to the MAC address EEPROM   Timur Tabi
• [U-Boot] [PATCH 1/2] S5P: support mmc driver   Minkyu Kang
• [U-Boot] [PATCH 2/2] s5p_goni: enable mmc0   Minkyu Kang
• [U-Boot] How to support Page Mode Flash Memory Device?   Cheng Vincent
• [U-Boot] How to support Page Mode Flash Memory Device?   David Hawkins
• [U-Boot] How to support Page Mode Flash Memory Device?   Cheng Vincent
• [U-Boot] DDR2 driver strength and ODT on FSL 85xx   Felix Radensky
• [U-Boot] How to support Page Mode Flash Memory Device?   Liu Dave-R63238
• [U-Boot] How to support Page Mode Flash Memory Device?   Cheng Vincent
• [U-Boot] Please pull u-boot-samsung/master   Minkyu Kang
• [U-Boot] [PATCH] ppc4xx: Fix/Update katmai board header   Stefan Roese
• [U-Boot] [RFC][PATCH v2 02/19] relocation: fixup cmdtable   Heiko Schocher
• [U-Boot] [RFC][PATCH v2 08/19] i2c: fix command usage help   Heiko Schocher
• [U-Boot] [RFC][PATCH v2 14/19] nand_fsl_nfc: get rid of local var   Heiko Schocher
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Heiko Schocher
• [U-Boot] at91sam source tree to use   Daniel Bristot de Oliveira
• [U-Boot] [PATCH] update the MIPS u-boot.lds   Shinya Kuribayashi
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert ARIBAUD
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH] fdt: Fix bug in size calculation in fdt_resize() with initrd use   Stefan Roese
• [U-Boot] 83xx UEC compile error   Joakim Tjernlund
• [U-Boot] [PATCH v2] update the MIPS u-boot.lds   Xiangfu Liu
• [U-Boot] [PATCH] update the MIPS u-boot.lds   Xiangfu Liu
• [U-Boot] [PATCH] Adds driver for Xilinx' xps_spi SPI controller.   Graeme Smecher
• [U-Boot] UEC numbering broken in uec_initialize   Joakim Tjernlund
• [U-Boot] [PATCH] Adds driver for Xilinx' xps_spi SPI controller.   Mike Frysinger
• [U-Boot] total u-boot neophyte tasked with resolving sd boot performance issue   eric van tassell
• [U-Boot] total u-boot neophyte tasked with resolving sd boot performance issue   Wolfgang Denk
• [U-Boot] total u-boot neophyte tasked with resolving sd boot performance issue   Wolfgang Denk
• [U-Boot] [PATCH 4/7] PXA: Palm Tungsten|C Support   Wolfgang Denk
• [U-Boot] [PATCH 6/7] PXA: Add initial Palm LifeDrive support   Wolfgang Denk
• [U-Boot] [PATCH 7/7] PXA: Vpac270 config fixes   Wolfgang Denk
• [U-Boot] [PULL] U-Boot-pxa   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Wolfgang Denk
• [U-Boot] Adding New Boards   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [PATCH v2 4/8] ARMV7: Add support for the TWL6030 I2C power chip used in OMAP4 systems   Wolfgang Denk
• [U-Boot] Please pull u-boot-ti/master   Wolfgang Denk
• [U-Boot] [PULL] U-Boot-pxa   Wolfgang Denk
• [U-Boot] [PATCH v3 4/8] ARMV7: Add support for the TWL6030 I2C power chip used in OMAP4 systems   Steve Sakoman
• [U-Boot] Please pull u-boot-ti/master   Steve Sakoman
• [U-Boot] Please pull u-boot-ti/master   Wolfgang Denk
• [U-Boot] [PATCH v2] powerpc/p4080: Add support for the P4080DS board   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx.git   Wolfgang Denk
• [U-Boot] [PATCH 1/2] S5P: support mmc driver   Wolfgang Denk
• [U-Boot] Please pull u-boot-samsung/master   Wolfgang Denk
• [U-Boot] Please pull u-boot-ti/master   Steve Sakoman
• [U-Boot] [PATCH] bootm: fix pointer warning with lzma   Wolfgang Denk
• [U-Boot] [PATCH] Rename getenv_r() into getenv_f()   Wolfgang Denk
• [U-Boot] [PATCH 5/5] New implementation for internal handling of environment variables.   Wolfgang Denk
• [U-Boot] ATTEN:$500,000.00   ATM CARD DELIVERY
• [U-Boot] [PATCH] config.mk: avoid -traditional-cpp on OS X 10.5   Mike Frysinger
• [U-Boot] [PATCH 1/2] S5P: support mmc driver   Minkyu Kang
• [U-Boot] [PATCH] update the MIPS u-boot.lds   Shinya Kuribayashi
• [U-Boot] [PATCH 0/2] tnetv107x cpsw ethernet switch driver   Cyril Chemparathy
• [U-Boot] [PATCH 1/2] TI: netdev: add driver for cpsw ethernet device   Cyril Chemparathy
• [U-Boot] [PATCH 2/2] TI: add tnetv107x evm board support for cpsw   Cyril Chemparathy
• [U-Boot] Western Union   Marie-Chri.Dru at ac-toulouse.fr
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert ARIBAUD
• [U-Boot] U-Boot hangs when starting kernel   scrawl at baseoftrash.de
• [U-Boot] [PATCH] at91_pit: Fix AT91_PIT_MR_PIV_MASK macro   Alexander Stein
• [U-Boot] [PATCH] at91: Add arch_preboot_os which disables PIT in a faster way   Alexander Stein
• [U-Boot] U-Boot hangs when starting kernel   Wolfgang Denk
• [U-Boot] [PATCH] Add support for NetusG20   Claudio Mignanti
• [U-Boot] Tel: +(44) 702 4098910,   WESTERN UNION MONEY TRANSFER
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Matthias Weißer
• [U-Boot] [PATCH] nios2: fix bootm error on fdt args   Scott McNutt
• [U-Boot] Account Upgrade!   Web Admin
• [U-Boot] [PATCH] config.mk: avoid -traditional-cpp on OS X 10.5   Andreas Bießmann
• [U-Boot] Getting started with uboot   Thomas Heller
• [U-Boot] [PATCH] Fix condition where bootm_size not set and wrong memory size reported   Kumar Gala
• [U-Boot] Getting started with uboot   Elie De Brauwer
• [U-Boot] Getting started with uboot   Wolfgang Denk
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert ARIBAUD
• [U-Boot] Getting started with uboot   Thomas Heller
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert ARIBAUD
• [U-Boot] Getting started with uboot   Wolfgang Denk
• [U-Boot] [PATCH] Adds driver for Xilinx' xps_spi SPI controller.   Graeme Smecher
• [U-Boot] [PATCH V2] Adds driver for Xilinx' xps_spi SPI controller.   Graeme Smecher
• [U-Boot] Vous avez été sélectionné pour la Bêta test de World of Warcraft : Cataclysm !   Blizzard Entertainment
• [U-Boot] [PATCH] S5P: mmc: use the standard debug macro   Minkyu Kang
• [U-Boot] [PATCH v2] update the MIPS u-boot.lds   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v3] update the MIPS u-boot.lds   xiangfu at openmobilefree.net
• [U-Boot] [PATCH v2 0/8] NDS32: Add NDS32 architecture support to u-boot.   Macpaul Lin
• [U-Boot] [PATCH v2 1/8] nds32: add support of general functions in arch lib   Macpaul Lin
• [U-Boot] [PATCH v2 2/8] nds32: add cpu support for nds32 arch   Macpaul Lin
• [U-Boot] [PATCH v2 3/8] nds32: add header files support for nds32   Macpaul Lin
• [U-Boot] [PATCH v2 4/8] nds32: add header files support for soc ag101   Macpaul Lin
• [U-Boot] [PATCH v2 5/8] nds32: add standalone related support for nds32   Macpaul Lin
• [U-Boot] [PATCH v2 6/8] nds32: add common support for nds32   Macpaul Lin
• [U-Boot] [PATCH v2 7/8] nds32: add board adp-ag101 support   Macpaul Lin
• [U-Boot] [PATCH v2 8/8] ftrtc010.c : enhance code according to original datasheet   Macpaul Lin
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Heiko Schocher
• [U-Boot] [PATCH v2 7/8] nds32: add board adp-ag101 support   Po-Yu Chuang
• [U-Boot] ATMEL Custodians == /dev/null ??   Reinhard Meyer
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Matthias Weißer
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Heiko Schocher
• [U-Boot] ATMEL Custodians == /dev/null ??   Andreas Bießmann
• [U-Boot] Vous avez été sélectionné pour la Bêta test de World of Warcraft : Cataclysm !   Blizzard Entertainment
• [U-Boot] ATMEL Custodians == /dev/null ??   Reinhard Meyer
• [U-Boot] [PATCH] LZMA and LZO causes compile error   Matthias Weisser
• [U-Boot] USB-CDC with musb controller   Stefano Babic
• [U-Boot] ATMEL Custodians == /dev/null ??   Eric Bénard
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Matthias Weißer
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert ARIBAUD
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Albert Aribaud
• [U-Boot] [PATCH V7 1/4] ide: add configuration CONFIG_IDE_SWAP_IO   Albert Aribaud
• [U-Boot] [PATCH V7 2/4] ide: add mvsata_ide driver   Albert Aribaud
• [U-Boot] [PATCH V7 3/4] cmd_ide: add support for orion5x   Albert Aribaud
• [U-Boot] [PATCH V7 4/4] edminiv2: add mvsata_ide and cmd_ide support   Albert Aribaud
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Rogan Dawes
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Bas Mevissen
• [U-Boot] Firmware upgrade possibilites technikes in uboot.   Lasse Skov
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Albert ARIBAUD
• [U-Boot] Getting started with uboot   Thomas Heller
• [U-Boot] Firmware upgrade possibilites technikes in uboot.   Bas Mevissen
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Rogan Dawes
• [U-Boot] Getting started with uboot   Elie De Brauwer
• [U-Boot] Firmware upgrade possibilites technikes in uboot.   Albert ARIBAUD
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Albert ARIBAUD
• [U-Boot] Firmware upgrade possibilites technikes in uboot.   Bas Mevissen
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Rogan Dawes
• [U-Boot] ATMEL Custodians == /dev/null ??   Mike Frysinger
• [U-Boot] Getting started with uboot   Thomas Heller
• [U-Boot] 128 Mb virtual memory configuration for u-boot   Alexander Varnin
• [U-Boot] Firmware upgrade possibilites technikes in uboot.   Wolfgang Denk
• [U-Boot] Getting started with uboot   Wolfgang Denk
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Ben Gardiner
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Wolfgang Denk
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Prafulla Wadaskar
• [U-Boot] [PATCH V7 3/4] cmd_ide: add support for orion5x   Prafulla Wadaskar
• [U-Boot] [PATCH V7 4/4] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH V7 1/4] ide: add configuration CONFIG_IDE_SWAP_IO   Prafulla Wadaskar
• [U-Boot] [PATCH V7 2/4] ide: add mvsata_ide driver   Prafulla Wadaskar
• [U-Boot] [PATCH] PXA: New MMC driver   Marek Vasut
• [U-Boot] [PATCH V7 3/4] cmd_ide: add support for orion5x   Albert ARIBAUD
• [U-Boot] [PATCH V7 2/4] ide: add mvsata_ide driver   Albert ARIBAUD
• [U-Boot] [PATCH V2 0/2] ARMV7: Add support for Versatile Express CortexA9x4   John Rigby
• [U-Boot] [RFC PATCH 0/3] Add device tree support for ARM to U-Boot   John Rigby
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   John Rigby
• [U-Boot] [RFC 2/3] ARM: WIP: add flat device tree support   John Rigby
• [U-Boot] [RFC 3/3] ARM: add config for beagle with fdt enabled   John Rigby
• [U-Boot] [PATCH] PXA: New MMC driver   Wolfgang Denk
• [U-Boot] [RFC 2/3] ARM: WIP: add flat device tree support   Wolfgang Denk
• [U-Boot] [RFC 3/3] ARM: add config for beagle with fdt enabled   Wolfgang Denk
• [U-Boot] [RFC 3/3] ARM: add config for beagle with fdt enabled   John Rigby
• [U-Boot] [RFC 2/3] ARM: WIP: add flat device tree support   John Rigby
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   Kumar Gala
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   John Rigby
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Heiko Schocher
• [U-Boot] [PATCH v2 18/19] beagle, cache: activate cache command   Heiko Schocher
• [U-Boot] [PATCH v2 2/8] nds32: add cpu support for nds32 arch   Po-Yu Chuang
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/8] nds32: add cpu support for nds32 arch   Macpaul Lin
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Prafulla Wadaskar
• [U-Boot] [PATCH v3 0/8] NDS32: Add NDS32 architecture support to u-boot.   Macpaul Lin
• [U-Boot] [PATCH v3 1/8] nds32: add support of general functions in arch lib   Macpaul Lin
• [U-Boot] [PATCH v3 2/8] nds32: add cpu support for nds32 arch   Macpaul Lin
• [U-Boot] [PATCH v3 3/8] nds32: add header files support for nds32   Macpaul Lin
• [U-Boot] [PATCH v3 4/8] nds32: add header files support for soc ag101   Macpaul Lin
• [U-Boot] [PATCH v3 5/8] nds32: add standalone related support for nds32   Macpaul Lin
• [U-Boot] [PATCH v3 6/8] nds32: add common support for nds32   Macpaul Lin
• [U-Boot] [PATCH v3 7/8] nds32: add board adp-ag101 support   Macpaul Lin
• [U-Boot] [PATCH v3 8/8] ftrtc010.c : enhance code according to original datasheet   Macpaul Lin
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Heiko Schocher
• [U-Boot] [PATCH V7 0/4] Add disk support to orion5x and edminiv2   Albert ARIBAUD
• [U-Boot] [PATCH V7 2/4] ide: add mvsata_ide driver   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/8] nds32: add cpu support for nds32 arch   Wolfgang Denk
• [U-Boot] [PATCH v3 0/8] NDS32: Add NDS32 architecture support to u-boot.   Wolfgang Denk
• [U-Boot] Warning NetReceive(): Make sure packet buffers start on an even address   Reinhard Meyer (-VC)
• [U-Boot] Warning NetReceive(): Make sure packet buffers start on an even address   Wolfgang Denk
• [U-Boot] Warning NetReceive(): Make sure packet buffers start on an even address   Reinhard Meyer (-VC)
• [U-Boot] [PATCH v2 18/19] beagle, cache: activate cache command   Ben Gardiner
• [U-Boot] [PATCH] NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.c   Reinhard Meyer (-VC)
• [U-Boot] Warning NetReceive(): Make sure packet buffers start on an even address   Chris Isbell
• [U-Boot] Warning NetReceive(): Make sure packet buffers start on an even address   Wolfgang Denk
• [U-Boot] TICKET No: 20511465463-7644   Mrs.Helen Anderson
• [U-Boot] [PATCH v3 0/8] NDS32: Add NDS32 architecture support to u-boot.   Wolfgang Denk
• [U-Boot] Warning NetReceive(): Make sure packet buffers start on an even address   Reinhard Meyer
• [U-Boot] Warning NetReceive(): Make sure packet buffers start on an even address   Reinhard Meyer (-VC)
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Ben Gardiner
• [U-Boot] Warning NetReceive(): Make sure packet buffers start on an even address   Wolfgang Denk
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Wolfgang Denk
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Ben Gardiner
• [U-Boot] Please Pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Reinhard Meyer
• [U-Boot] [PATCH] NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.c   Ben Warren
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Reinhard Meyer
• [U-Boot] [PATCH v2] NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.c   Reinhard Meyer (-VC)
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Ben Gardiner
• [U-Boot] [PATCH v2] PXA: New MMC driver   Marek Vasut
• [U-Boot] [PATCH v2.1] PXA: New MMC driver   Marek Vasut
• [U-Boot] [PATCH] NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.c   Mike Frysinger
• [PATCH] Replace CHANGELOG files by auto-generated "snapshot.commit"   Wolfgang Denk
• [U-Boot] [PATCH] NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.c   Reinhard Meyer
• [U-Boot] [GIT PULL] u-boot-mpc83xx fix   Wolfgang Denk
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Wolfgang Denk
• [U-Boot] [PATCH] Fix typo inside atmel_mci driver   Wolfgang Denk
• [U-Boot] [PATCH] Fix typo inside atmel_mci driver   Reinhard Meyer
• [U-Boot] ATMEL Custodians == /dev/null ??   Reinhard Meyer
• [U-Boot] ATMEL Custodians == /dev/null ??   Mike Frysinger
• [U-Boot] ATMEL Custodians == /dev/null ??   Reinhard Meyer
• [U-Boot] ATMEL Custodians == /dev/null ??   Mike Frysinger
• [U-Boot] [PATCH V7 2/4] ide: add mvsata_ide driver   Prafulla Wadaskar
• [U-Boot] 'usb start' works very unstable   Sergei Trofimovich
• [U-Boot] [PATCH V7 2/4] ide: add mvsata_ide driver   Albert ARIBAUD
• [U-Boot] 'usb start' works very unstable   Wolfgang Denk
• [U-Boot] [PATCH V8 0/5] Add disk support to orion5x and edminiv2   Albert Aribaud
• [U-Boot] [PATCH V8 1/5] ide: add configuration CONFIG_IDE_SWAP_IO   Albert Aribaud
• [U-Boot] [PATCH V8 2/5] ide: reorder object files alphabetically   Albert Aribaud
• [U-Boot] [PATCH V8 3/5] ide: add mvsata_ide driver   Albert Aribaud
• [U-Boot] [PATCH V8 4/5] cmd_ide: add support for orion5x   Albert Aribaud
• [U-Boot] [PATCH V8 5/5] edminiv2: add mvsata_ide and cmd_ide support   Albert Aribaud
• [U-Boot] 'usb start' works very unstable   Sergei Trofimovich
• [U-Boot] GOOD DAY:   MR RAHA OUSMAN
• [U-Boot] 'usb start' works very unstable   Wolfgang Denk
• [U-Boot] [PATCH V2] AT91 Fix: return value of get_tbclk   Jens Scharsig
• [U-Boot] [PATCH V2] AT91 Fix: return value of get_tbclk   Jens Scharsig
• [U-Boot] [PATCH V3] AT91 Fix: return value of get_tbclk   Jens Scharsig
• [U-Boot] [PATCH V3] AT91 Fix: return value of get_tbclk   Reinhard Meyer
• [U-Boot] [GIT PULL] u-boot-mpc83xx fix   Kim Phillips
• [U-Boot] [GIT PULL] u-boot-mpc83xx fix   Wolfgang Denk
• [U-Boot] [GIT PULL] u-boot-mpc83xx fix   Kim Phillips
• [U-Boot] 'usb start' works very unstable   Prafulla Wadaskar
• [U-Boot] 'usb start' works very unstable   Prafulla Wadaskar
• [U-Boot] [PATCH] get_ram_size: memory content of base address was not restored   Wolfgang Denk
• [U-Boot] [PATCH] fix bug in get_ram_size()   Wolfgang Denk
• [U-Boot] [PATCH] Fix condition where bootm_size not set and wrong memory size reported   Wolfgang Denk
• [U-Boot] at91sam9g20 MAC address in EEPROM?   Wolfgang Denk
• [U-Boot] [PATCH v3 2/4] mtdparts: show net size in mtdparts list   Wolfgang Denk
• [U-Boot] [PATCH v3 3/4] mtdparts: add new sub-command "spread"   Wolfgang Denk
• [U-Boot] [PATCH v3 4/4] mtdparts: new add.e: add part skipping bad blocks   Wolfgang Denk
• [U-Boot] [PATCH] Change the configuration for the STx GP3-SSA board in order to support FDT parsing and passing.   Wolfgang Denk
• [U-Boot] Patch adding reads/writes[bwl]   Wolfgang Denk
• [U-Boot] 'usb start' works very unstable   Sergei Trofimovich
• [U-Boot] [PATCH] ext2fs: Fix optimization bug for doubly-indirect block pointers   Wolfgang Denk
• [U-Boot] [PATCH 3/3] avr32: Add simple paging support   Wolfgang Denk
• [U-Boot] [PATCH V5 4/4] edminiv2: add mvsata_ide and cmd_ide support   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Wolfgang Denk
• [U-Boot] [PATCH V5 1/3] arm: Add support for MB86R0x SoCs   Wolfgang Denk
• [U-Boot] [RFC][PATCH 00/19] arm: add full relocation / cache support   Wolfgang Denk
• [U-Boot] [PATCH] LZMA and LZO causes compile error   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Mike Frysinger
• [U-Boot] [PATCH V2 1/2] ARMV7: Versatile Express Coretile CortexA9x4 support   Wolfgang Denk
• [U-Boot] [PATCH V2 2/2] ARMV7: Fixed baudrate setting in pl01x driver   Wolfgang Denk
• [U-Boot] [PATCH V2 0/2] ARMV7: Add support for Versatile Express CortexA9x4   Wolfgang Denk
• [U-Boot] 'usb start' works very unstable   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Reinhard Meyer
• [U-Boot] [PATCH] always relocate fdt into an lmb-allocated memory block   Wolfgang Denk
• [U-Boot] [PATCH 1/2] cmd_ide: add support for Kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] Kirkwood: openrd_base: Added SATA support   Prafulla Wadaskar
• [U-Boot] cannot load file from ext2 partition on OMAP3 evm   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Mike Frysinger
• [U-Boot] ATMEL Custodians == /dev/null ??   Wolfgang Denk
• [U-Boot] [PATCH 1/3] PXA: Fix off-the-tree build problems   Marek Vasut
• [U-Boot] [PATCH 2/3] PXA: Fix missing includes   Marek Vasut
• [U-Boot] [PATCH 3/3] PXA: Declare __io for vpac270 IDE   Marek Vasut
• [U-Boot] [PATCH v3 2/4] mtdparts: show net size in mtdparts list   Harald Welte
• [U-Boot] [PATCH v6] POST cleanup.   Michael Zaidman
• [U-Boot] [PATCH] orion5x: allow overriding default mappings windows   Albert ARIBAUD
• [U-Boot] [PATCH] disk/part.c: 'usb storage' avoiding overflow when output capacity   Sergei Trofimovich
• [U-Boot] Bug in IP/UDP defragment?   Wolfgang Denk
• [U-Boot] Bug in IP/UDP defragment?   Alessandro Rubini
• [U-Boot] [PATCH] disk/part.c: 'usb storage' avoiding overflow when output capacity   Sergei Shtylyov
• [U-Boot] [PATCH V3] AT91 Fix: return value of get_tbclk   Jens Scharsig
• [U-Boot] [PATCH] disk/part.c: 'usb storage' avoiding overflow when output capacity   Sergei Trofimovich
• [U-Boot] [PATCH v3 2/4] mtdparts: show net size in mtdparts list   Wolfgang Denk
• [U-Boot] Bug in IP/UDP defragment?   Wolfgang Denk
• [U-Boot] [PATCH 1/3 v2] PXA: Fix off-the-tree build problems   Marek Vasut
• [U-Boot] [PATCH 2/3] PXA: Fix missing includes   Marek Vasut
• [U-Boot] [PATCH 3/3] PXA: Declare __io for vpac270 IDE   Marek Vasut
• [U-Boot] [PATCH] fdt: Fix bug in size calculation in fdt_resize() with initrd use   Jerry Van Baren
• [U-Boot] [PATCH v2] Add mkimage manpage   Wolfgang Denk
• [U-Boot] [PATCH 1/2] mmc: omap3: make local symbols static   Wolfgang Denk
• [U-Boot] [U-BOOT][PATCH]mmc: modify setting tran_speed and change csd's instead of response value   Wolfgang Denk
• [U-Boot] [PATCH] eSPI and Intel E1000 support for P1/P2 RDB   Wolfgang Denk
• [U-Boot] [PATCH] Add support for kirkwood sata controller   Wolfgang Denk
• [U-Boot] [PATCH] fdt relocate: have more attention to use a bootmap or not   Wolfgang Denk
• [U-Boot] [PATCH] bug fix and cleanup for s3c44b0 serial driver   Wolfgang Denk
• [U-Boot] [PATCH v6] POST cleanup.   Wolfgang Denk
• [U-Boot] [PATCH 2/4 v2] musb: MSC host support for AM35x   Wolfgang Denk
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Wolfgang Denk
• [U-Boot] [PATCH 1/2 v2] 8xx, kup4: minor configuration changes   Wolfgang Denk
• [U-Boot] [PATCH 1/2 v3] 8xx, kup4: minor configuration changes   Wolfgang Denk
• [U-Boot] [PATCH 2/2 v3] 8xx, kup4: add FDT support   Wolfgang Denk
• [U-Boot] [PATCH] net, fec: Shorten device name as done for other drivers   Wolfgang Denk
• [U-Boot] [PATCH] memmove_wd: Allow overlapping memory area   Wolfgang Denk
• [U-Boot] [PATCH] memmove_wd: Allow overlapping memory area   Wolfgang Denk
• [U-Boot] [PATCH] MX51EVK: fix return value of get_timer_masked   Wolfgang Denk
• [U-Boot] [PATCH] cmd editing: optimize/shrink output blanking   Wolfgang Denk
• [U-Boot] [PATCH] print_buffer: optimize & shrink   Wolfgang Denk
• [U-Boot] [PATCH] ppc4xx: cleanup default environment for AMCC boards   Wolfgang Denk
• [U-Boot] [PATCH v2] mflash: use common cmd_usage function   Wolfgang Denk
• [U-Boot] [PATCH v2] dataflash mmc mux: use common cmd_usage function   Wolfgang Denk
• [U-Boot] [PATCH] getenv_f(): fix handling of too short buffers   Wolfgang Denk
• [U-Boot] [PATCH 1/3] ppc4xx: Fix building of AR405 board   Wolfgang Denk
• [U-Boot] [PATCH v3] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is undefined   Wolfgang Denk
• [U-Boot] [PATCH] ext2fs: Fix optimization bug for doubly-indirect block pointers   Wolfgang Denk
• [U-Boot] [PATCH] flash_protect: check for NULL flash info   Wolfgang Denk
• [U-Boot] [PATCH] tools/env/fw_printenv: Make redundant env work on locked flashes also   Wolfgang Denk
• [U-Boot] [PATCH 1/2] various cmd_* files: remove the command name from the help message   Wolfgang Denk
• [U-Boot] [PATCH 2/2] various cmd_* files: fixed layout a little bit   Wolfgang Denk
• [U-Boot] [PATCH] board/purple/flash.c: removed unneded variable   Wolfgang Denk
• [U-Boot] [PATCH] fdt: Fix bug in size calculation in fdt_resize() with initrd use   Wolfgang Denk
• [U-Boot] [PATCH] fdt: Fix bug in size calculation in fdt_resize() with initrd use   Wolfgang Denk
• [U-Boot] [PATCH] config.mk: avoid -traditional-cpp on OS X 10.5   Wolfgang Denk
• [U-Boot] [PATCH 1/3 v2] PXA: Fix off-the-tree build problems   Wolfgang Denk
• [U-Boot] [PATCH 2/3] PXA: Fix missing includes   Wolfgang Denk
• [U-Boot] [PATCH 3/3] PXA: Declare __io for vpac270 IDE   Wolfgang Denk
• [U-Boot] ATMEL Custodians == /dev/null ??   Haavard Skinnemoen
• [U-Boot] [PATCH 3/3] avr32: Add simple paging support   Haavard Skinnemoen
• [U-Boot] [PATCH] get_ram_size: memory content of base address was not restored   Po-Yu Chuang
• [U-Boot] Claim Lucky Amount!!( £1 ,500,000.00 )   British National Lottery
• [U-Boot] Claim Lucky Amount!!( £1 ,500,000.00 )   British National Lottery
• [U-Boot] Claim Lucky Amount!!( £1 ,500,000.00 )   British National Lottery
• [U-Boot] Hello Dear,   Aisha Rabiya
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Reinhard Meyer
• [U-Boot] [PATCH] Add support for kirkwood sata controller   Prafulla Wadaskar
• [U-Boot] [PATCH] disk/part.c: 'usb storage' avoiding overflow when output capacity   Prafulla Wadaskar
• [U-Boot] [PATCH] orion5x: allow overriding default mappings windows   Prafulla Wadaskar
• [U-Boot] [PATCH V8 0/5] Add disk support to orion5x and edminiv2   Prafulla Wadaskar
• [U-Boot] [PATCH V8 1/5] ide: add configuration CONFIG_IDE_SWAP_IO   Prafulla Wadaskar
• [U-Boot] [PATCH V8 2/5] ide: reorder object files alphabetically   Prafulla Wadaskar
• [U-Boot] ATMEL Custodians == /dev/null ??   Mike Frysinger
• [U-Boot] [PATCH V8 3/5] ide: add mvsata_ide driver   Prafulla Wadaskar
• [U-Boot] [PATCH V8 4/5] cmd_ide: add support for orion5x   Prafulla Wadaskar
• [U-Boot] [PATCH V8 5/5] edminiv2: add mvsata_ide and cmd_ide support   Prafulla Wadaskar
• [U-Boot] [PATCH 1/2] cmd_ide: add support for Kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] Kirkwood: openrd_base: Added SATA support   Prafulla Wadaskar
• [U-Boot] [PATCH] orion5x: allow overriding default mappings windows   Albert ARIBAUD
• [U-Boot] [PATCH V8 0/5] Add disk support to orion5x and edminiv2   Albert ARIBAUD
• [U-Boot] Pull request u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] ATMEL Custodians == /dev/null ??   Haavard Skinnemoen
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Andreas Bießmann
• [U-Boot] [PATCH V3] AT91 Fix: return value of get_tbclk   Alexander Stein
• [U-Boot] ATMEL Custodians == /dev/null ??   Mike Frysinger
• [U-Boot] [PATCH v4] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is defined   Alexander Stein
• [U-Boot] Pull request u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] [PATCH V5 1/3] arm: Add support for MB86R0x SoCs   Matthias Weißer
• [U-Boot] [PATCH] memmove_wd: Allow overlapping memory area   Alexander Stein
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Reinhard Meyer
• [U-Boot] [PATCH v4] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is defined   Mike Frysinger
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Andreas Bießmann
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Andreas Bießmann
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Reinhard Meyer
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Alessandro Rubini
• [U-Boot] [PATCH v2] AT91SAM9XE add embedded flash support   Andreas Bießmann
• [U-Boot] Pull request u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] ATMEL Custodians == /dev/null ??   Wolfgang Denk
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Joakim Tjernlund
• [U-Boot] Pull request u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] [PATCH v3 1/3] at91: Defined main clock frequency on esd at91 boards   Daniel Gorsulowski
• [U-Boot] [PATCH v5 2/3] at91: Update meesc board to new SoC access   Daniel Gorsulowski
• [U-Boot] [PATCH v3 3/3] at91: Enabeling USB host on meesc board   Daniel Gorsulowski
• [U-Boot] [PATCH V5 1/3] arm: Add support for MB86R0x SoCs   Wolfgang Denk
• [U-Boot] [PATCH] memmove_wd: Allow overlapping memory area   Wolfgang Denk
• [U-Boot] [PATCH] AT91: remove superfluous test in spi driver   Xu, Hong
• [U-Boot] Winner   Uk National Lottery
• [U-Boot] [PATCH] MX51EVK: fix return value of get_timer_masked   Stefano Babic
• [U-Boot] [PATCH v4 1/2] cpuat91: convert to new at91 soc architecture   Eric Bénard
• [U-Boot] [PATCH v4 2/2] cpuat91: update defaut environement   Eric Bénard
• [U-Boot] [PATCH] memmove_wd: Allow overlapping memory area   Alexander Stein
• [U-Boot] ATMEL Custodians == /dev/null ??   Haavard Skinnemoen
• [U-Boot] [PATCH V6 0/3] Add support for MB86R0x SoCs   Matthias Weisser
• [U-Boot] [PATCH V6 1/3] arm: Add support for MB86R0x SoCs   Matthias Weisser
• [U-Boot] [PATCH V6 2/3] video: add support for display controller in MB86R0x SoCs   Matthias Weisser
• [U-Boot] [PATCH V6 3/3] arm: Add support for jadecpu board based on MB86R01 SoC   Matthias Weisser
• [U-Boot] [PATCH v4] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is defined   Alexander Stein
• [U-Boot] [PATCH] memmove_wd: Allow overlapping memory area   Wolfgang Denk
• [U-Boot] [PATCH] memmove_wd: Allow overlapping memory area   Alexander Stein
• [U-Boot] ATMEL Custodians == /dev/null ??   Wolfgang Denk
• [U-Boot] [PATCH 1/1] Fixed clobbered output of the "help usb" command   Sergei Poselenov
• [U-Boot] [PATCH] memmove_wd: Allow overlapping memory area   Wolfgang Denk
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Philippe De Muyter
• [U-Boot] [PATCH 2/4 v2] musb: MSC host support for AM35x   Remy Bohmer
• [U-Boot] at91sam9g20 MAC address in EEPROM?   Jim Sheldon
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: cleanup default environment for AMCC boards   Stefan Roese
• [U-Boot] [PATCH 0/3] Fix building various esd boards in u-boot-testing repo's hastable branch   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix building of sc3 board   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix/Update katmai board header   Stefan Roese
• [U-Boot] at91sam9g20 MAC address in EEPROM?   Reinhard Meyer
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH v3 2/4] mtdparts: show net size in mtdparts list   Ben Gardiner
• [U-Boot] TOT: cmd_mmc.c, line 136 missing "   Reinhard Meyer
• [U-Boot] [PATCH 0/2] fix little endian build   xiangfu at openmobilefree.net
• [U-Boot] [PATCH 1/2] update the MIPS u-boot.lds   xiangfu at openmobilefree.net
• [U-Boot] [PATCH 2/2] change the way of build little endian board   xiangfu at openmobilefree.net
• [U-Boot] [PATCH] fix cmd_mmc.c, line 136 missing "   Reinhard Meyer
• [U-Boot] [PATCH v2] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Philippe De Muyter
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Philippe De Muyter
• [U-Boot] ATMEL Custodians == /dev/null ??   Haavard Skinnemoen
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Joakim Tjernlund
• [U-Boot] [PATCH v3] AT91SAM9XE: add embedded flash support   Reinhard Meyer
• [U-Boot] [PATCH] AT91: reset.c: fix comments, add option   Reinhard Meyer
• [U-Boot] [PATCH] SPI: cmd_spi.c: add option to specify bus and mode   Reinhard Meyer
• [U-Boot] [PATCH] AT91/AVR32: atmel_spi.c: flush RDR before next SPI transaction   Reinhard Meyer
• [U-Boot] [PATCH] SPI: cmd_spi.c: add option to specify bus and mode   Mike Frysinger
• [U-Boot] [PATCH 2/2] change the way of build little endian board   Mike Frysinger
• [U-Boot] USB-CDC with musb controller   Remy Bohmer
• [U-Boot] [PATCH 1/1] Fixed clobbered output of the "help usb" command   Remy Bohmer
• [U-Boot] [PATCH] disk/part.c: 'usb storage' avoiding overflow when output capacity   Sergei Trofimovich
• [U-Boot] [PATCH 4/4 v2] mtdparts: new add.e: add part skipping bad blocks   Scott Wood
• [U-Boot] [PATCH] usb: musb: set target address for non-multipoint devices   Mike Frysinger
• [U-Boot] [PATCH 4/4 v2] mtdparts: new add.e: add part skipping bad blocks   Ben Gardiner
• [U-Boot] [PATCH 4/4 v2] mtdparts: new add.e: add part skipping bad blocks   Scott Wood
• [U-Boot] Pull request - net   Ben Warren
• [U-Boot] [PATCH] usb: musb: setup TXCOUNT for Blackfin musb   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: only write CLRDATATOG when appropriate   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: cm-bf548: increase monitor len   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: set target address for non-multipoint devices   Sergei Shtylyov
• [U-Boot] [PATCH] net: Fix faulty definition of uec_initialize()   Joakim Tjernlund
• [U-Boot] [PATCH] usb: musb: set target address for non-multipoint devices   Mike Frysinger
• [U-Boot] [PATCH v2] usb: avoiding overflow when output capacity in 'usb storage' cmd   Sergei Trofimovich
• [U-Boot] [PATCH] net: Fix faulty definition of uec_initialize()   Mike Frysinger
• [U-Boot] [PATCH v4 0/4] mtdparts: add bad-block skipping   Ben Gardiner
• [U-Boot] [PATCH v4 1/4] mtdparts: regroup calls to get_mtd_device_nm   Ben Gardiner
• [U-Boot] [PATCH v4 2/4] mtdparts: show net size in mtdparts list   Ben Gardiner
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] [PATCH v4 4/4] mtdparts: new add.spread: add part skipping bad blocks   Ben Gardiner
• [U-Boot] [PATCH] net: Fix faulty definition of uec_initialize()   Ben Warren
• [U-Boot] [PATCH 2/2] powerpc/8xxx: query feature reporting register for num cores on unknown cpus   Wolfgang Denk
• [U-Boot] [PATCH] fix cmd_mmc.c, line 136 missing "   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: set target address for non-multipoint devices   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: re-use board data in cpu banner   Mike Frysinger
• [U-Boot] [PATCH v2] usb: musb: set target address for non-multipoint devices   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: shutdown video DMA when booting Linux   Mike Frysinger
• [U-Boot] [PATCH] Blackfin: move CONFIG_BFIN_CPU to board config.mk   Mike Frysinger
• [PATCH] powerpc/8xxx: share PIC defines among 85xx and 86xx   Kim Phillips
• [U-Boot] [PATCH 2/2] powerpc/8xxx: query feature reporting register for num cores on unknown cpus   Kim Phillips
• [U-Boot] u-boot patch base version   Joe Hershberger
• [U-Boot] u-boot patch base version   Ben Warren
• [U-Boot] [PATCH 2/2] change the way of build little endian board   Xiangfu Liu
• [U-Boot] [PATCH] MX51EVK: fix return value of get_timer_masked   Li Haibo
• [U-Boot] [PATCH] MX51EVK: fix return value of get_timer_masked   Li Haibo
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] [PATCH] MX51EVK: fix return value of get_timer_masked   Xiangfu Liu
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] [PATCH 1/9] ARM: Define __raw_readX and __raw_writeX   Marek Vasut
• [U-Boot] [PATCH 2/9] PXA: pxafb: Add ACX517AKN support   Marek Vasut
• [U-Boot] [PATCH 3/9] common: Enable serial for PXA250   Marek Vasut
• [U-Boot] [PATCH 4/9] PXA: Palm Tungsten|C Support   Marek Vasut
• [U-Boot] [PATCH 5/9] PXA: pxafb: Add support for Sharp LQ038J7DH53   Marek Vasut
• [U-Boot] [PATCH 6/9] PXA: Add initial Palm LifeDrive support   Marek Vasut
• [U-Boot] [PATCH 7/9] PXA: Voipac270 improvements   Marek Vasut
• [U-Boot] [PATCH 8/9] PXA: Balloon3 board support   Marek Vasut
• [U-Boot] [PATCH 9/9] PXA: Add missing MAINTAINERS entries   Marek Vasut
• [U-Boot] can uboot boot from spi flash?   Shawn Jin
• [U-Boot] [PATCH] MX51EVK: fix return value of get_timer_masked   Li Haibo
• [U-Boot] can uboot boot from spi flash?   Mike Frysinger
• [U-Boot] [PATCH] MX51EVK: fix return value of get_timer_masked   Xiangfu Liu
• [U-Boot] can uboot boot from spi flash?   Li Haibo
• [U-Boot] [PATCH] bug fix and cleanup for s3c44b0 serial driver   Minkyu Kang
• [U-Boot] [PATCH] S5P: mmc: use the standard debug macro   Minkyu Kang
• [U-Boot] [PATCH] net: Fix faulty definition of uec_initialize()   Joakim Tjernlund
• [U-Boot] [PATCH] net: Fix faulty definition of uec_initialize()   Mike Frysinger
• [U-Boot] [PATCH] bug fix and cleanup for s3c44b0 serial driver   Reinhard Meyer
• [U-Boot] [PATCH v2] MX51EVK: fix return value of get_timer_masked   Li Haibo
• [U-Boot] [PATCH 1/1] Fixed clobbered output of the "help usb" command   Sergei Poselenov
• [U-Boot] can uboot boot from spi flash?   Shawn Jin
• [U-Boot] [PATCH v2] MX51EVK: fix return value of get_timer_masked   Stefano Babic
• [U-Boot] [PATCH] bug fix and cleanup for s3c44b0 serial driver   Minkyu Kang
• [U-Boot] Please pull u-boot-imx   Stefano Babic
• [U-Boot] u-boot patch base version   Wolfgang Denk
• [U-Boot] can uboot boot from spi flash?   Wolfgang Denk
• [U-Boot] AT91/AVR32: at91_emac.c VS macb.c in drivers/net   Reinhard Meyer
• [U-Boot] [PATCH] AT91: reset.c: fix comments, add option   Detlev Zundel
• [U-Boot] [PATCH] Create a new driver for Atmel at91/avr MCI adapters that uses the u-boot mmc framework.   Reinhard Meyer
• [U-Boot] [PATCH] usb: musb: only write CLRDATATOG when appropriate   Sergei Shtylyov
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Stefan Roese
• [U-Boot] [PATCH] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Sekhar Nori
• [U-Boot] [PATCH] net: Fix faulty definition of uec_initialize()   Joakim Tjernlund
• [U-Boot] [PATCHv2] net: Fix faulty definition of uec_initialize()   Joakim Tjernlund
• [U-Boot] [PATCH] Create a new driver for Atmel at91/avr MCI adapters that uses the u-boot mmc framework.   Reinhard Meyer
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] [PATCH] Fixing spi erase for S25FL128P_256K   Marc-André Hébert
• [U-Boot] [PATCH] Fixing spi erase for S25FL128P_256K   Sergei Shtylyov
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Philippe De Muyter
• [U-Boot] [PATCH v2] Fixing spi erase for S25FL128P_256K   Marc-André Hébert
• [U-Boot] [PATCH v6] POST cleanup.   Michael Zaidman
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Stefan Roese
• [U-Boot] AT91/AVR32: at91_emac.c VS macb.c in drivers/net   Ben Warren
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Joakim Tjernlund
• [U-Boot] [PATCH CFI]: Fix printing & reading of 16-bit CFI device identifiers   Philippe De Muyter
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug   Stefan Roese
• [U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell?P33/P30 256-Mbit 65nm bug   Philippe De Muyter
• [U-Boot] [PATCH 2/2] MPC8308ERDB: minimal support for devboard from Freescale (ICache issue)   Ilya Yanok
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Ben Gardiner
• [U-Boot] Marketing Jurídico | Newsletter Inrise Consultoria | Edição 17 | Ano 03   Inrise Consultoria
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   Grant Likely
• [U-Boot] [RFC 2/3] ARM: WIP: add flat device tree support   Grant Likely
• [U-Boot] [RFC 2/3] ARM: WIP: add flat device tree support   Grant Likely
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   Dan Malek
• [U-Boot] Please Pull u-boot-ti/master   Wolfgang Denk
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Mike Frysinger
• [U-Boot] [RFC 2/3] ARM: WIP: add flat device tree support   Albert ARIBAUD
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   Grant Likely
• [U-Boot] [PATCH] usb: musb: only write CLRDATATOG when appropriate   Mike Frysinger
• [U-Boot] Pull request u-boot-marvell.git   Wolfgang Denk
• [U-Boot] [PATCH] orion5x: allow overriding default mappings windows   Wolfgang Denk
• [U-Boot] Pull request u-boot-marvell.git   Wolfgang Denk
• [U-Boot] [RFC 2/3] ARM: WIP: add flat device tree support   John Rigby
• [U-Boot] Please pull u-boot-imx   Wolfgang Denk
• [U-Boot] Pull request u-boot-arm   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master   Wolfgang Denk
• [U-Boot] [PATCH v2] Fixing spi erase for S25FL128P_256K   Mike Frysinger
• [U-Boot] Pull request u-boot-marvell.git   Albert ARIBAUD
• [U-Boot] Pull request - net   Wolfgang Denk
• [U-Boot] [RFC 2/3] ARM: WIP: add flat device tree support   Wolfgang Denk
• [U-Boot] Pull request u-boot-arm   Wolfgang Denk
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   John Rigby
• [U-Boot] [PATCH v2.1] PXA: New MMC driver   Wolfgang Denk
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   Grant Likely
• [U-Boot] [PATCH] disk/part.c: 'usb storage' avoiding overflow when output capacity   Wolfgang Denk
• [U-Boot] [PATCH V6 1/3] arm: Add support for MB86R0x SoCs   Wolfgang Denk
• [U-Boot] [PATCH V6 2/3] video: add support for display controller in MB86R0x SoCs   Wolfgang Denk
• [U-Boot] [PATCH V6 3/3] arm: Add support for jadecpu board based on MB86R01 SoC   Wolfgang Denk
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   Dan Malek
• [U-Boot] [PATCH 1/9] ARM: Define __raw_readX and __raw_writeX   Wolfgang Denk
• [U-Boot] [PATCH 2/9] PXA: pxafb: Add ACX517AKN support   Wolfgang Denk
• [U-Boot] [PATCH 9/9] PXA: Add missing MAINTAINERS entries   Wolfgang Denk
• [U-Boot] [PATCH 8/9] PXA: Balloon3 board support   Wolfgang Denk
• [U-Boot] [RFC 1/3] FDT: Add fixup support of multiple banks of memory   Scott Wood
• [U-Boot] [PATCH 1/9] ARM: Define __raw_readX and __raw_writeX   Marek Vasut
• [U-Boot] [PATCH 2/9] PXA: pxafb: Add ACX517AKN support   Marek Vasut
• [U-Boot] [PATCH v2.1] PXA: New MMC driver   Marek Vasut
• [U-Boot] Email Notice   info at nationallottery.co.uk
• [U-Boot] u-boot patch submission   Tirumala Marri
• [U-Boot] A bl command question about smdk2410 in u-boot-2010.06   Paul Hsu
• [U-Boot] u-boot patch submission   Mike Frysinger
• [U-Boot] [PATCH v2.1] PXA: New MMC driver   Wolfgang Denk
• [U-Boot] u-boot patch submission   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nishanth Menon
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Heiko Schocher
• [U-Boot] Need To Know How U-boot Command Line Interface works   Prashant Purohit
• [U-Boot] Need To Know about the Command Line Interface in U-boot.   prashantpurohit025 at gmail.com
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Joakim Tjernlund
• [U-Boot] Need To Know about the Command Line Interface in U-boot.   Paul Hsu
• [U-Boot] [PATCH] [NEXT] Cleanup use of CONFIG_SYS_SRAM_BASE and CONFIG_SYS_SRAM_SIZE   Wolfgang Denk
• [U-Boot] [PATCH 1/2] UEC: Don't udelay needlessly   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] UEC PHY: Remove strange 0.5 sec delay   Joakim Tjernlund
• [U-Boot] USB-CDC with musb controller   Stefano Babic
• [U-Boot] [PATCH v2] Fixing spi erase for S25FL128P_256K   Marc-André Hébert
• [U-Boot] USB-CDC with musb controller   Vitaly Kuzmichev
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Ben Gardiner
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Ben Gardiner
• [U-Boot] [PATCH] CONFIG_CMD_JFFS2 is not necessary to use mtdparts on erase & protect on/off   Alexander Stein
• [U-Boot] USB-CDC with musb controller   Stefano Babic
• [U-Boot] [PATCH] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nori, Sekhar
• [U-Boot] [PATCH] [NEXT] Cleanup use of CONFIG_SYS_SRAM_BASE and CONFIG_SYS_SRAM_SIZE   Mike Frysinger
• [U-Boot] [PATCH v2] Fixing spi erase for S25FL128P_256K   Mike Frysinger
• [U-Boot] [PATCH] CONFIG_CMD_JFFS2 is not necessary to use mtdparts on erase & protect on/off   Stefan Roese
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Heiko Schocher
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Heiko Schocher
• [U-Boot] [PATCH 01/26] arm: get rid of bi_env   Heiko Schocher
• [U-Boot] [PATCH 02/26] ARM: flush cache for arm926   Heiko Schocher
• [U-Boot] [PATCH 03/26] ARM: cp15: setup mmu and enable dcache   Heiko Schocher
• [U-Boot] [PATCH 04/26] ARM V7 (OMAP): add data cache support, test on Beagle board   Heiko Schocher
• [U-Boot] [PATCH 05/26] ARM (ARM11): add data cache support, test on Qong board   Heiko Schocher
• [U-Boot] [PATCH 06/26] relocation: fixup cmdtable   Heiko Schocher
• [U-Boot] [PATCH 07/26] common: move TOTAL_MALLOC_LEN to include/common.h   Heiko Schocher
• [U-Boot] [PATCH 08/26] i2c: fix command usage help   Heiko Schocher
• [U-Boot] [PATCH 09/26] disk/part.c: fix relocation fixup   Heiko Schocher
• [U-Boot] [PATCH 10/26] i2c, omap24xx: set bus_initialized only after relocation.   Heiko Schocher
• [U-Boot] [PATCH 11/26] nand_boot_fsl_nfc.c: make "nfc" a "static const" pointer   Heiko Schocher
• [U-Boot] [PATCH 12/26] ARM: add relocation support   Heiko Schocher
• [U-Boot] [PATCH 13/26] ARM: implement relocation for ARM11   Heiko Schocher
• [U-Boot] [PATCH 14/26] ARM: implement relocation for ARM V7 (OMAP)   Heiko Schocher
• [U-Boot] [PATCH 15/26] ARM: implement relocation for ARM926   Heiko Schocher
• [U-Boot] [PATCH 16/26] ARM: implement relocation for ARM920   Heiko Schocher
• [U-Boot] [PATCH 17/26] ARM: implement relocation for ARM925   Heiko Schocher
• [U-Boot] [PATCH 18/26] ARM: implement relocation for ARM946   Heiko Schocher
• [U-Boot] [PATCH 19/26] ARM: implement relocation for pxa   Heiko Schocher
• [U-Boot] [PATCH 20/26] ARM: implement relocation for ixp   Heiko Schocher
• [U-Boot] [PATCH 21/26] ARM: implement relocation for sa1100   Heiko Schocher
• [U-Boot] [PATCH 22/26] ARM: implement relocation for s3c44b0   Heiko Schocher
• [U-Boot] [PATCH 23/26] ARM: implement relocation for lh7a40x   Heiko Schocher
• [U-Boot] [PATCH 24/26] ARM: implement relocation for arm_intcm   Heiko Schocher
• [U-Boot] [PATCH 25/26] ARM: implement relocation for arm720t   Heiko Schocher
• [U-Boot] [PATCH 26/26] ARM: implement relocation for arm1176   Heiko Schocher
• [U-Boot] USB-CDC with musb controller   Remy Bohmer
• [U-Boot] USB-CDC with musb controller   Remy Bohmer
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [RFC][PATCH v2 17/19] arm cp15: setup mmu and enable dcache   Wolfgang Denk
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Ben Gardiner
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Wolfgang Denk
• [U-Boot] USB-CDC with musb controller   Wolfgang Denk
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Ben Gardiner
• [U-Boot] [PATCH] USB-CDC: Added debug output to ether.c   Stefano Babic
• [U-Boot] [PATCH] USB-CDC: called handle_interrupts inside usb_eth_send   Stefano Babic
• [U-Boot] [PATCH] USB-CDC: add missing variable in ether.c   Stefano Babic
• [U-Boot] [PATCH] USB-CDC: correct wrong alignment in ether.c   Stefano Babic
• [U-Boot] [PATCH] USB-CDC: wrong ep status used   Stefano Babic
• [U-Boot] u-boot patch submission   Tirumala Marri
• [U-Boot] [PATCH] usb: musb: stub out MUSB_TXCSR_MODE for Blackfin parts   Mike Frysinger
• [U-Boot] [PATCH] USB-CDC: Added debug output to ether.c   Wolfgang Denk
• [U-Boot] (G)PIO access trends, architecture independant solutions?   Reinhard Meyer
• [U-Boot] u-boot patch submission   Wolfgang Denk
• [U-Boot] [PATCH] USB-CDC: Added debug output to ether.c   Reinhard Meyer
• [U-Boot] (G)PIO access trends, architecture independant solutions?   Mike Frysinger
• [U-Boot] [PATCH] USB-CDC: called handle_interrupts inside usb_eth_send   Remy Bohmer
• [U-Boot] [PATCH] mpc5xxx_fec/motionpro: disable PHY initialization on motionpro board   Ilya Yanok
• [U-Boot] [PATCH] cmd_elf: add an option for loading ELFs according to PHDRs   Mike Frysinger
• [U-Boot] [PATCH] Makefile: restore support for board shortcut targets   Mike Frysinger
• [U-Boot] [PATCH] Makefile: restore support for board shortcut targets   Mike Frysinger
• [U-Boot] [PATCH] mpc5xxx_fec/motionpro: disable PHY initialization on motionpro board   Ilya Yanok
• [U-Boot] [PATCH] MAKEALL: cut down on duplication of targets   Mike Frysinger
• [U-Boot] hi   justina benson
• [U-Boot] [PATCH 1/2] mmc: omap3: make local symbols static   Steve Sakoman
• [U-Boot] [PATCH] env_nand: return error when no device is found   Mike Frysinger
• [U-Boot] [PATCH 1/2] UEC: Don't udelay needlessly   Kim Phillips
• [U-Boot] [PATCH 2/2] UEC PHY: Remove strange 0.5 sec delay   Kim Phillips
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Heiko Schocher
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Sekhar Nori
• [U-Boot] [PATCH] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nishanth Menon
• [U-Boot] [PATCH 2/2] UEC PHY: Remove strange 0.5 sec delay   Joakim Tjernlund
• [U-Boot] [PATCH] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nori, Sekhar
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Frans Meulenbroeks
• [U-Boot] [PATCH v2 0/3] avr32: simple paging support   Haavard Skinnemoen
• [U-Boot] [PATCH v2 1/3] avr32: Print unrelocated PC on exception   Haavard Skinnemoen
• [U-Boot] [PATCH v2 2/3] avr32: Use uncached() macro to get an address for SDRAM init   Haavard Skinnemoen
• [U-Boot] [PATCH v2 3/3] avr32: Add simple paging support   Haavard Skinnemoen
• [U-Boot] BDI3000 configuration for AppliedMicro 460EX revB   Felix Radensky
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Reinhard Meyer
• [U-Boot] BDI3000 configuration for AppliedMicro 460EX revB   Stefan Roese
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Matthias Weißer
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Alexander Stein
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Matthias Weißer
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Reinhard Meyer
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Reinhard Meyer
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Wolfgang Denk
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Wolfgang Denk
• [U-Boot] [PATCH] USB-CDC: called handle_interrupts inside usb_eth_send   Stefano Babic
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Wolfgang Denk
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Wolfgang Denk
• [U-Boot] [PATCH] USB-CDC: Added debug output to ether.c   Stefano Babic
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Wolfgang Denk
• [U-Boot] BDI3000 configuration for AppliedMicro 460EX revB   Felix Radensky
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Reinhard Meyer
• [U-Boot] Bug in mcf547x_8x/config.mk   Groleo Marius
• [U-Boot] [PATCH] USB-CDC: Added debug output to ether.c   Stefano Babic
• [U-Boot] [PATCH] USB-CDC: called handle_interrupts inside usb_eth_send   Remy Bohmer
• [U-Boot] Urgent Attention.   Mr. Paul Wolfenden
• [U-Boot] Urgent Attention.   Mr. Paul Wolfenden
• [U-Boot] [PATCH] USB-CDC: wrong ep status used   Vitaly Kuzmichev
• [U-Boot] [RFD] store env size in env area (+ cookie + len)   Wolfgang Denk
• [U-Boot] [PATCH] USB-CDC: correct wrong alignment in ether.c   Sergei Shtylyov
• [U-Boot] Bug in mcf547x_8x/config.mk   Groleo Marius
• [U-Boot] I-Cache disabled for Cortex   vipink
• [U-Boot] I-Cache disabled for Cortex   Wolfgang Denk
• [U-Boot] [PATCH] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nishanth Menon
• [U-Boot] [PATCH] MTD: Cleanup jffs2/mtdpart headers   Stefan Roese
• [U-Boot] [PATCH] MTD: Cleanup jffs2/mtdpart headers   Rogan Dawes
• [U-Boot] [PATCH] cfi_flash: flinfo: allow user interrupt in flash print info fn   Stefan Roese
• [U-Boot] [PATCH CFI]: Fix printing & reading of 16-bit CFI device identifiers   Stefan Roese
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] [PATCH] USB-CDC: correct wrong alignment in ether.c   Stefano Babic
• [U-Boot] [PATCH] USB-CDC: wrong ep status used   Stefano Babic
• [U-Boot] [PATCH] USB-CDC: called handle_interrupts inside usb_eth_send   Stefano Babic
• [U-Boot] Non standard CFI detection tweaks   Stefan Roese
• [U-Boot] [PATCH 0/8] USB: gadget: fix porting bugs   Vitaly Kuzmichev
• [U-Boot] [PATCH 1/8] USB-CDC: Restuct USB gadget Makefile   Vitaly Kuzmichev
• [U-Boot] [PATCH 2/8] USB-CDC: Add lost 'qmult' definition   Vitaly Kuzmichev
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Vitaly Kuzmichev
• [U-Boot] [PATCH 4/8] USB-CDC: Correct freeing usb requests   Vitaly Kuzmichev
• [U-Boot] [PATCH 5/8] USB-CDC: Replace 'strcpy' by 'strlcpy'   Vitaly Kuzmichev
• [U-Boot] [PATCH 6/8] USB-CDC: Correct stat_req initialization   Vitaly Kuzmichev
• [U-Boot] [PATCH 7/8] USB: gadget: ethernet error path potential oops fix   Vitaly Kuzmichev
• [U-Boot] [PATCH 8/8] USB: gadget: change simple_strtol to simple_strtoul   Vitaly Kuzmichev
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Shinya Kuribayashi
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Detlev Zundel
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Shinya Kuribayashi
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Detlev Zundel
• [U-Boot] Non standard CFI detection tweaks   Reinhard Meyer
• [U-Boot] Non standard CFI detection tweaks   Rogan Dawes
• [U-Boot] [PATCH V8 5/5] edminiv2: add mvsata_ide and cmd_ide support   Rogan Dawes
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Joakim Tjernlund
• [U-Boot] [PATCH] env_nand: return error when no device is found   Ben Gardiner
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
• [U-Boot] [PATCH] MAKEALL: cut down on duplication of targets   Ben Gardiner
• [U-Boot] [PATCH] Makefile: restore support for board shortcut targets   Detlev Zundel
• [U-Boot] [PATCH v2 2/3] avr32: Use uncached() macro to get an address for SDRAM init   Detlev Zundel
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nori, Sekhar
• [U-Boot] Early I2C bus availability   Brent Bartson
• [U-Boot] [PATCH] USB-CDC: add missing variable in ether.c   Sergei Shtylyov
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Sergei Shtylyov
• [U-Boot] [PATCH] USB-CDC: wrong ep status used   Sergei Shtylyov
• [U-Boot] [PATCH 7/8] USB: gadget: ethernet error path potential oops fix   Sergei Shtylyov
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] ***BULK*** Healthcare, Business and Finance mailing/email lists   Boris Knox
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   Marek Vasut
• [U-Boot] [PATCH 0/3] Integrate new USB gadget layer and USB CDC-ECM driver layer   Remy Bohmer
• [U-Boot] [PATCH 1/3] Integrate USB gadget layer and USB CDC driver layer   Remy Bohmer
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Remy Bohmer
• [U-Boot] [PATCH 3/3] Enable the use of Ethernet over USB (CDC) for the AT91SAM9261EK board.   Remy Bohmer
• [U-Boot] Early I2C bus availability   Joakim Tjernlund
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] [PATCH] usb: musb: setup TXCOUNT for Blackfin musb   Remy Bohmer
• [U-Boot] [PATCH v2] usb: musb: set target address for non-multipoint devices   Remy Bohmer
• [U-Boot] [PATCH] usb: musb: only write CLRDATATOG when appropriate   Remy Bohmer
• [U-Boot] [PATCH] usb: musb: only write CLRDATATOG when appropriate   Remy Bohmer
• [U-Boot] [PATCH 1/2] mmc: omap3: make local symbols static   Paulraj, Sandeep
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Remy Bohmer
• [U-Boot] [PATCH 0/8] USB: gadget: fix porting bugs   Remy Bohmer
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Reinhard Meyer
• [U-Boot] [PATCH] usb: musb: only write CLRDATATOG when appropriate   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: only write CLRDATATOG when appropriate   Mike Frysinger
• [U-Boot] mirror u-boot on github   Ben Gardiner
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Remy Bohmer
• [U-Boot] Early I2C bus availability   Wolfgang Denk
• [U-Boot] mirror u-boot on github   Wolfgang Denk
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Wolfgang Denk
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Wolfgang Denk
• [U-Boot] IDE part overflow?   Rogan Dawes
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Magnus Lilja
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [PATCH] cfi_flash: flinfo: allow user interrupt in flash print info fn   Wolfgang Denk
• [U-Boot] Please pull u-boot-cfi-flash/master   Wolfgang Denk
• [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
• [U-Boot] Please pull u-boot-ti/master   Wolfgang Denk
• [U-Boot] [PATCH 0/8] USB: gadget: fix porting bugs   stefano babic
• [U-Boot] Early I2C bus availability   Wolfgang Denk
• [U-Boot] [PATCH 0/2] tnetv107x cpsw ethernet switch driver   Paulraj, Sandeep
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Reinhard Meyer
• [U-Boot] [PATCH 0/2] tnetv107x cpsw ethernet switch driver   Ben Warren
• [U-Boot] [PATCH 0/2] tnetv107x cpsw ethernet switch driver   Mike Frysinger
• [U-Boot] [PATCH 0/2] tnetv107x cpsw ethernet switch driver   Ben Warren
• [U-Boot] [PATCH] nios2: fix out of reach case for do_reset   Thomas Chou
• [U-Boot] [PATCH] nios2: fix out of reach case for do_reset   Mike Frysinger
• [U-Boot] [PATCH] nios2: fix out of reach case for do_reset   Thomas Chou
• [U-Boot] [PATCH v2 2/3] avr32: Use uncached() macro to get an address for SDRAM init   Haavard Skinnemoen
• [U-Boot] [PATCH] Fix M548x gcc 4.1.x detection   Groleo Marius
• [U-Boot] Please pull u-boot-cfi-flash/master   Stefan Roese
• [U-Boot] [PATCH] S5P: Use accessor functions instead of SoC specific defines to access the base address   Minkyu Kang
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Detlev Zundel
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Detlev Zundel
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Vitaly Kuzmichev
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Remy Bohmer
• [U-Boot] [PATCH 0/8] USB: gadget: fix porting bugs   Vitaly Kuzmichev
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Stefano Babic
• [U-Boot] [PATCH 0/8] USB: gadget: fix porting bugs   Stefano Babic
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Remy Bohmer
• [U-Boot] [PATCH] USB-CDC: wrong ep status used   Vitaly Kuzmichev
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Remy Bohmer
• [U-Boot] [PATCH] USB-CDC: wrong ep status used   Stefano Babic
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nori, Sekhar
• [U-Boot] [PATCH 1/2] mmc: omap3: make local symbols static   Grazvydas Ignotas
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Wolfgang Denk
• [U-Boot] [PATCH] OMAP3: remove unused config macros   Grazvydas Ignotas
• [U-Boot] Please pull u-boot-cfi-flash/master   Wolfgang Denk
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Wolfgang Denk
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Vitaly Kuzmichev
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   asc0
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Wolfgang Denk
• [U-Boot] [PATCH] usb: musb: only write CLRDATATOG when appropriate   Sergei Shtylyov
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Detlev Zundel
• [U-Boot] [PATCH] cfi_flash: Cleanup flash_print_info()   Stefan Roese
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Sergei Shtylyov
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Reinhard Meyer
• [U-Boot] [PATCH v2 2/3] avr32: Use uncached() macro to get an address for SDRAM init   Detlev Zundel
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Remy Bohmer
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Remy Bohmer
• [U-Boot] [PATCH 3/8] USB-CDC: Linux-like debug printout   Remy Bohmer
• [U-Boot] [PATCH] Fix typo inside atmel_mci driver   Claudio Mignanti
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Schleifer, Alexander
• [U-Boot] [PATCH v2 2/3] avr32: Use uncached() macro to get an address for SDRAM init   Haavard Skinnemoen
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Vitaly Kuzmichev
• [U-Boot] [PATCH v2 4/8] USB-CDC: Correct freeing usb requests   Vitaly Kuzmichev
• [U-Boot] [PATCH v2 5/8] USB-CDC: Replace 'strcpy' by 'strlcpy'   Vitaly Kuzmichev
• [U-Boot] [PATCH v2 6/8] USB-CDC: Correct stat_req initialization   Vitaly Kuzmichev
• [U-Boot] [PATCH v2 2/3] avr32: Use uncached() macro to get an address for SDRAM init   Detlev Zundel
• [U-Boot] [PATCH v2 7/8] USB-CDC: ethernet error path potential oops fix   Vitaly Kuzmichev
• [U-Boot] [PATCH v2 8/8] USB-CDC: change simple_strtol to simple_strtoul   Vitaly Kuzmichev
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Rogan Dawes
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Vitaly Kuzmichev
• [U-Boot] [PATCH] [TESTING] da8xx: fixup ARM relocation support   Ben Gardiner
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Joakim Tjernlund
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Vitaly Kuzmichev
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Stefano Babic
• [U-Boot] [PATCH v2] [TESTING] da8xx: fixup ARM relocation support   Ben Gardiner
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Vitaly Kuzmichev
• [U-Boot] mirror u-boot on github   Ben Gardiner
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Rogan Dawes
• [U-Boot] NetConsole and network API   Stefano Babic
• [U-Boot] [PATCH 2/3] Connect the AT91 UDC to USB CDC-ethernet support   Wolfgang Denk
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Wolfgang Denk
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Wolfgang Denk
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Wolfgang Denk
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Stefano Babic
• [U-Boot] [PATCH 00/26] arm: add full relocation / cache support   Shinya Kuribayashi
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Sergei Shtylyov
• [U-Boot] [PATCH] MX51: Update responsible for mx51evk   Stefano Babic
• [U-Boot] [RFC] Board support patches for the eXMeritus HWW-1U-1A devices   Kyle Moffett
• [U-Boot] [RFC][PATCH 1/3] DDR2: Support new JEDEC DDR2 SPD 1.3 spec   Kyle Moffett
• [U-Boot] [RFC][PATCH 2/3] e1000: Intel 82571EB: Don't wait for MNG cycle on unmanaged chips   Kyle Moffett
• [U-Boot] [RFC][PATCH 3/3] Add board support for the eXMeritus HWW-1U-1A devices   Kyle Moffett
• [U-Boot] [PATCH] Fix typo inside atmel_mci driver   Reinhard Meyer
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] [PATCH] env_nand: return error when no device is found   Scott Wood
• [U-Boot] NetConsole and network API   Joe Hershberger
• [U-Boot] [PATCH 1/8] USB-CDC: Restuct USB gadget Makefile   Remy Bohmer
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   Marek Vasut
• [U-Boot] [PATCH 2/8] USB-CDC: Add lost 'qmult' definition   Remy Bohmer
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Remy Bohmer
• [U-Boot] [PATCH v2 5/8] USB-CDC: Replace 'strcpy' by 'strlcpy'   Remy Bohmer
• [U-Boot] [PATCH v2 4/8] USB-CDC: Correct freeing usb requests   Remy Bohmer
• [U-Boot] [PATCH v2 6/8] USB-CDC: Correct stat_req initialization   Remy Bohmer
• [U-Boot] [PATCH v2 8/8] USB-CDC: change simple_strtol to simple_strtoul   Remy Bohmer
• [U-Boot] [PATCH v2 7/8] USB-CDC: ethernet error path potential oops fix   Remy Bohmer
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Wolfgang Denk
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Wolfgang Denk
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Wolfgang Denk
• [U-Boot] [PATCH v2 3/8] USB-CDC: Use native debug printout macros   Remy Bohmer
• [U-Boot] handling of bad blocks in nand   Grant Edwards
• [U-Boot] [PATCH 00/7] ARMV7: OMAP3: Board updates for Beagle and Overo   Steve Sakoman
• [U-Boot] [PATCH 01/7] ARMV7: OMAP: Move syslib.c to omap-common since it can be shared by OMAP3 and OMAP4   Steve Sakoman
• [U-Boot] [PATCH 02/7] ARMV7: OMAP: add convenience function to set TWL4030 regulator voltages   Steve Sakoman
• [U-Boot] [PATCH 03/7] ARMV7: OMAP: Enable input driver on Overo's MMC1_CLK and MMC3_CLK pinmux setup   Steve Sakoman
• [U-Boot] [PATCH 04/7] ARMV7: OMAP: Add mpurate boot arg for Overo and Beagle   Steve Sakoman
• [U-Boot] [PATCH 05/7] ARMV7: OMAP: Add board revision detection for Overo   Steve Sakoman
• [U-Boot] [PATCH 06/7] ARMV7: OMAP: Add detection and support for Beagle C4 revision   Steve Sakoman
• [U-Boot] [PATCH 07/7] ARMV7: OMAP: Configure Overo's second network chip   Steve Sakoman
• [U-Boot] handling of bad blocks in nand   Grant Edwards
• [U-Boot] UNS: [Nios2-dev] [PATCH] nios2: fix out of reach case for do_reset   Brad Parker
• [U-Boot] [PATCH] Add mvsata support for the Sheevaplug devices   GEAK
• [U-Boot] [PATCH] Add mvsata support for the Sheevaplug devices   Wolfgang Denk
• [U-Boot] [PATCH v4] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is defined   Mike Frysinger
• [U-Boot] [PATCH v2] Add mvsata support for the Sheevaplug devices   Gérald Kerma
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Albert Aribaud
• [U-Boot] commit 64419e47 causes data aborts in md on orion5x internal registers   Albert ARIBAUD
• [U-Boot] [PATCH V2 1/2] USB-CDC: correct wrong alignment in ether.c   Stefano Babic
• [U-Boot] [PATCH V2 2/2] USB-CDC: called handle_interrupts inside usb_eth_send   Stefano Babic
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Mike Frysinger
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Albert ARIBAUD
• [U-Boot] Make preparatory patches that initially have no effect?   Reinhard Meyer
• [U-Boot] commit 64419e47 causes data aborts in md on orion5x internal registers   Rogan Dawes
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] IDE_BUS unconditionally expects 2 devices per bus   Rogan Dawes
• [U-Boot] IDE_BUS unconditionally expects 2 devices per bus   Rogan Dawes
• [U-Boot] IDE_BUS unconditionally expects 2 devices per bus   Albert ARIBAUD
• [U-Boot] [PATCH] Add mvsata support for the Sheevaplug devices   Sergei Shtylyov
• [U-Boot] [PATCH V2 1/2] USB-CDC: correct wrong alignment in ether.c   Sergei Shtylyov
• [U-Boot] [PATCH V2 2/2] USB-CDC: called handle_interrupts inside usb_eth_send   Sergei Shtylyov
• [U-Boot] [PATCH] Add mvsata support for the Sheevaplug devices   Albert ARIBAUD
• [U-Boot] Make preparatory patches that initially have no effect?   Wolfgang Denk
• [U-Boot] [PATCH V2 1/2] USB-CDC: correct wrong alignment in ether.c   Remy Bohmer
• [U-Boot] [PATCH V2 1/2] USB-CDC: correct wrong alignment in ether.c   Remy Bohmer
• [U-Boot] [PATCH V2 2/2] USB-CDC: called handle_interrupts inside usb_eth_send   Remy Bohmer
• [U-Boot] Make preparatory patches that initially have no effect?   Reinhard Meyer
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Mike Frysinger
• [U-Boot] Make preparatory patches that initially have no effect?   Wolfgang Denk
• [U-Boot] Struct SoC access (was:Make preparatory patches that initially have no effect?)   Reinhard Meyer
• [U-Boot] Struct SoC access (was:Make preparatory patches that initially have no effect?)   Mike Frysinger
• [U-Boot] Struct SoC access   Reinhard Meyer
• [U-Boot] Struct SoC access (was:Make preparatory patches that initially have no effect?)   Wolfgang Denk
• [U-Boot] Struct SoC access   Reinhard Meyer
• [U-Boot] Struct SoC access   Reinhard Meyer
• [U-Boot] Struct SoC access   Mike Frysinger
• [U-Boot] Struct SoC access   Wolfgang Denk
• [U-Boot] Struct SoC access   Wolfgang Denk
• [U-Boot] Struct SoC access   Reinhard Meyer
• [U-Boot] [PATCH 1/4] tools: enable img2srec for "all" target   Mike Frysinger
• [U-Boot] [PATCH 2/4] tools: update .gitignore   Mike Frysinger
• [U-Boot] [PATCH 3/4] unify toplevel tools targets   Mike Frysinger
• [U-Boot] [PATCH 4/4] tools/env: use host build flags   Mike Frysinger
• [U-Boot] [PATCH V2 1/2] USB-CDC: correct wrong alignment in ether.c   Stefano Babic
• [U-Boot] [PATCH V2 2/2] USB-CDC: called handle_interrupts inside usb_eth_send   Stefano Babic
• [U-Boot] [PATCH V3 1/2] USB-CDC: correct wrong alignment in ether.c   Stefano Babic
• [U-Boot] [PATCH V3 2/2] USB-CDC: called handle_interrupts inside usb_eth_send   Stefano Babic
• [U-Boot] [PATCH V3 2/2] USB-CDC: called handle_interrupts inside usb_eth_send   Remy Bohmer
• [U-Boot] [PATCH V3 1/2] USB-CDC: correct wrong alignment in ether.c   Remy Bohmer
• [U-Boot] [PATCH] IDE: Don't assume there are always two devices per bus   Rogan Dawes
• [U-Boot] [PATCH] IDE: Don't assume there are always two devices per bus   Wolfgang Denk
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Xu, Hong
• [U-Boot] UNS: [Nios2-dev] [PATCH] nios2: fix out of reach case for do_reset   Thomas Chou
• [U-Boot] [PATCH v2] nios2: fix out of reach case for do_reset   Thomas Chou
• [U-Boot] [PATCH 0/7] patch set for P1021MDS support   Haiying Wang
• [U-Boot] [PATCH 0/7] patch set for P1021MDS support   Wolfgang Denk
• [U-Boot] [PATCH v2] IDE: Don't assume there are always two devices per bus   Rogan Dawes
• [U-Boot] [PATCH] IDE: Don't assume there are always two devices per bus   Rogan Dawes
• [U-Boot] Transfer of US$10.5 Million   Sun Moyo
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] [PATCH] common/cmd_mmc.c: fix a bug   Haiying Wang
• [U-Boot] [PATCH 0/7] patch set for P1021MDS support   Haiying Wang
• [U-Boot] [PATCH 1/7] nand_spl: remove static for nand_load   Haiying Wang
• [U-Boot] [PATCH 2/7] powerpc/85xx: do not reloc l2srbar if CONFIG_FLASH_BASE is not defined   Haiying Wang
• [U-Boot] [PATCH 3/7] Add support for SRAM Boot   Haiying Wang
• [U-Boot] [PATCH 4/7] powerpc/p1021: Add P1021MDS board support   Haiying Wang
• [U-Boot] [PATCH 5/7] powerpc/p1021: Add more P1021 defines   Haiying Wang
• [U-Boot] [PATCH 6/7] powerpc/qe: supports loading QE firmware from nand flash   Haiying Wang
• [U-Boot] [PATCH 7/7] powerpc/p1021mds: add QE and UEC support   Haiying Wang
• [U-Boot] Debugging why my kernel won't start   Gérald Kerma
• [U-Boot] [PATCH] net: Change the NFS_TIMEOUT to 20s for using nfs load image.   Li Yang
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Schleifer, Alexander
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Schleifer, Alexander
• [U-Boot] [PATCH 0/7] patch set for P1021MDS support   Wolfgang Denk
• [U-Boot] [PATCH] net: Change the NFS_TIMEOUT to 20s for using nfs load image.   Wolfgang Denk
• [U-Boot] [PATCH 1/7] nand_spl: remove static for nand_load   Wolfgang Denk
• [U-Boot] [PATCH 2/7] powerpc/85xx: do not reloc l2srbar if CONFIG_FLASH_BASE is not defined   Wolfgang Denk
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] BDI3000 for MIPS64   Andreas Bießmann
• [U-Boot] [PATCH 3/7] Add support for SRAM Boot   Wolfgang Denk
• [U-Boot] [PATCH] net: Change the NFS_TIMEOUT to 20s for using nfs load image.   Li Yang
• [U-Boot] [PATCH 4/7] powerpc/p1021: Add P1021MDS board support   Wolfgang Denk
• [U-Boot] [PATCH 6/7] powerpc/qe: supports loading QE firmware from nand flash   Wolfgang Denk
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Wolfgang Denk
• [U-Boot] [PATCH] net: Change the NFS_TIMEOUT to 20s for using nfs load image.   Wolfgang Denk
• [U-Boot] BDI3000 for MIPS64   Wolfgang Denk
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nori, Sekhar
• [U-Boot] [PATCH] common/cmd_mmc.c: fix a bug   Mike Frysinger
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Wolfgang Denk
• [U-Boot] [PATCH 1/2] fdt_support: support adding EDID property to FDT display nodes   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] pdm360ng: add EDID property to FDT display node   Anatolij Gustschin
• [U-Boot] [PATCHv3 CFI flash] Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips.   Philippe De Muyter
• [U-Boot] [PATCH 2/2] pdm360ng: add EDID property to FDT display node   Wolfgang Denk
• [U-Boot] Information request about Generic MMC   Gérald Kerma
• [U-Boot] [u-Boot] USB EHCI for mpc512x crashes Uboot   Einar Már Björgvinsson
• [U-Boot] Information request about Generic MMC   Mike Frysinger
• [U-Boot] [PATCH] [U-BOOT] Zoom2: Ethernet: Enabling LAN9221 chip and CMD_NET.   Aldo Brett Cedillo Martinez
• [U-Boot] handling of bad blocks in nand   Scott Wood
• [U-Boot] handling of bad blocks in nand   Grant Edwards
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] Struct SoC access   Scott Wood
• [U-Boot] Debugging why my kernel won't start   Wolfgang Denk
• [U-Boot] [PATCH 3/7] Add support for SRAM Boot   Scott Wood
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] [PATCH] non-working dns323 config   Rogan Dawes
• [U-Boot] [PATCH - RFC] env_nand.c: fail gracefully if no nand is present   Steve Sakoman
• [U-Boot] [PATCH - RFC] env_nand.c: fail gracefully if no nand is present   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Debugging why my kernel won't start   Wolfgang Denk
• [U-Boot] [PATCH - RFC] env_nand.c: fail gracefully if no nand is present   Steve Sakoman
• [U-Boot] [PATCH] S5P: Use accessor functions instead of SoC specific defines to access the base address   Minkyu Kang
• [U-Boot] [PATCH 2/7] powerpc/85xx: do not reloc l2srbar if CONFIG_FLASH_BASE is not defined   Haiying Wang
• [U-Boot] [PATCH 1/7] nand_spl: remove static for nand_load   Haiying Wang
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] [PATCH 2/7] powerpc/85xx: do not reloc l2srbar if CONFIG_FLASH_BASE is not defined   Wolfgang Denk
• [U-Boot] [PATCH 3/7] Add support for SRAM Boot   Haiying Wang
• [U-Boot] [PATCH 4/7] powerpc/p1021: Add P1021MDS board support   Haiying Wang
• [U-Boot] Struct SoC access   Reinhard Meyer
• [U-Boot] [PATCH 6/7] powerpc/qe: supports loading QE firmware from nand flash   Haiying Wang
• [U-Boot] [PATCH] net: Change the NFS_TIMEOUT to 20s for using nfs load image.   Jin Qing-B24347
• [U-Boot] [u-Boot] USB EHCI for mpc512x crashes Uboot   Damien Dusha
• [U-Boot] [PATCH 2/2] pdm360ng: add EDID property to FDT display node   Anatolij Gustschin
• [U-Boot] [PATCHv3 CFI flash] Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips.   Stefan Roese
• [U-Boot] [PATCH 3/7] Add support for SRAM Boot   Wolfgang Denk
• [U-Boot] [PATCH 4/7] powerpc/p1021: Add P1021MDS board support   Wolfgang Denk
• [U-Boot] [PATCH 6/7] powerpc/qe: supports loading QE firmware from nand flash   Wolfgang Denk
• [U-Boot] [PATCH] net: Change the NFS_TIMEOUT to 20s for using nfs load image.   Wolfgang Denk
• [U-Boot] [u-Boot] USB EHCI for mpc512x crashes Uboot   Wolfgang Denk
• [U-Boot] [PATCH] net: Change the NFS_TIMEOUT to 20s for using nfs load image.   Jin Qing-B24347
• [U-Boot] [u-Boot] USB EHCI for mpc512x crashes Uboot   Einar Már Björgvinsson
• [U-Boot] [PATCHv4 CFI flash] Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips.   Philippe De Muyter
• [U-Boot] Debugging why my kernel won't start   Albert ARIBAUD
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Schleifer, Alexander
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] Debugging why my kernel won't start   Albert ARIBAUD
• [U-Boot] [PATCH v2a] AT91: add SD/MMC support   Reinhard Meyer
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Detlev Zundel
• [U-Boot] [PATCH 2/2] pdm360ng: add EDID property to FDT display node   Detlev Zundel
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nori, Sekhar
• [U-Boot] [PATCH v3] AT91: MCI: add SD/MMC driver using mmc framework   Reinhard Meyer
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Detlev Zundel
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Martinez, Aldo
• [U-Boot] Debugging why my kernel won't start   Albert ARIBAUD
• [U-Boot] [PATCH v2 2/2] pdm360ng: add EDID property to FDT display node   Anatolij Gustschin
• [U-Boot] [PATCHv4 CFI flash] Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips.   Stefan Roese
• [U-Boot] [PATCHv4 CFI flash] Work around bug in Numonyx P33/P30 256-Mbit?65nm flash chips.   Philippe De Muyter
• [U-Boot] [PATCH V2] Adds driver for Xilinx' xps_spi SPI controller.   Graeme Smecher
• [U-Boot] [PATCHv4 CFI flash] Work around bug in Numonyx P33/P30 256-Mbit?65nm flash chips.   Philippe De Muyter
• [U-Boot] [PATCHv5 CFI flash] Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips.   Philippe De Muyter
• [U-Boot] [PATCHv4 CFI flash] Work around bug in Numonyx P33/P30 256-Mbit?65nm flash chips.   Stefan Roese
• [U-Boot] [PATCH V2] Adds driver for Xilinx' xps_spi SPI controller.   Anatolij Gustschin
• [U-Boot] [PATCH V2] Adds driver for Xilinx' xps_spi SPI controller.   Graeme Smecher
• [U-Boot] Grant Notification   UNESCO
• [U-Boot] [PATCH 3/7] Add support for SRAM Boot   Scott Wood
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Wolfgang Denk
• [U-Boot] [PATCH 3/7] Add support for SRAM Boot   Wolfgang Denk
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] Dünyanın Heryerine Hızlı ve Ekonomik Hava Kargo & Kurye Taşımacılığı   Mps Rusya & Türki Cumhuriyetler Hızlı Paket Taşıma
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] Debugging why my kernel won't start   Wolfgang Denk
• [U-Boot] Debugging why my kernel won't start   Wolfgang Denk
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Jeff Carr
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] Debugging why my kernel won't start   Wolfgang Denk
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] [RFC] CONFIG_RESET_PHY_R feature is broken   Ilya Yanok
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Paulraj, Sandeep
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Jeff Carr
• [U-Boot] loading S-record files   Mangelschots, Jef
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Martinez, Aldo
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Martinez, Aldo
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Jeff Carr
• [U-Boot] Hallo   Bella Benju
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Steve Sakoman
• [U-Boot] [PATCH 2/2] powerpc/8xxx: query feature reporting register for num cores on unknown cpus   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Rename Security Engine Job Queue to Job Ring to match docs   Kumar Gala
• [U-Boot] [PATCH] powerpc/8xxx: Fix quad-rank DIMMs support on corenet_ds board.   Kumar Gala
• [U-Boot] please update ARM mach-types   Reinhard Meyer
• [U-Boot] [PATCH] musb: Add usb support configs for DA850   Ajay Kumar Gupta
• [U-Boot] Debugging why my kernel won't start   Wolfgang Denk
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Wolfgang Denk
• [U-Boot] [RFC] CONFIG_RESET_PHY_R feature is broken   Albert ARIBAUD
• [U-Boot] [PATCH V3] AT91 Fix: return value of get_tbclk   Xu, Hong
• [U-Boot] [PATCHv5 CFI flash] Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips.   Stefan Roese
• [U-Boot] [PATCH] cfi_flash: Cleanup flash_print_info()   Stefan Roese
• [U-Boot] [PATCH 1/2] UEC: Don't udelay needlessly   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] UEC PHY: Remove strange 0.5 sec delay   Joakim Tjernlund
• [U-Boot] [PATCH 2/2] UEC PHY: Remove strange 0.5 sec delay   Joakim Tjernlund
• [U-Boot] Please pull u-boot-cfi-flash/master (update)   Stefan Roese
• [U-Boot] [RFC] CONFIG_RESET_PHY_R feature is broken   Wolfgang Denk
• [U-Boot] [PATCH 1/2] UEC: Don't udelay needlessly   Wolfgang Denk
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Detlev Zundel
• [U-Boot] [PATCH v3 1/3] at91: Defined main clock frequency on esd at91 boards   Xu, Hong
• [U-Boot] [PATCH v2 2/2] pdm360ng: add EDID property to FDT display node   Detlev Zundel
• [U-Boot] [PATCH v5 2/3] at91: Update meesc board to new SoC access   Xu, Hong
• [U-Boot] [PATCH v3 3/3] at91: Enabeling USB host on meesc board   Xu, Hong
• [U-Boot] [PATCH 1/2] fdt_support: support adding EDID property to FDT display nodes   Detlev Zundel
• [U-Boot] [RFC] CONFIG_RESET_PHY_R feature is broken   Ilya Yanok
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Nori, Sekhar
• [U-Boot] [PATCH v2 1/2] fdt_support: support adding EDID property to FDT display nodes   Anatolij Gustschin
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] [RFC] CONFIG_RESET_PHY_R feature is broken   Albert ARIBAUD
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Wolfgang Denk
• [U-Boot] Debugging why my kernel won't start   Wolfgang Denk
• [U-Boot] [PATCH v2] TI: DaVinci DA850 EVM: support passing device speed grade information to kernel   Detlev Zundel
• [U-Boot] [PATCH] hmi1001, mucmc52, uc100, uc101: move boards to vendor directory   Wolfgang Denk
• [U-Boot] [PATCH] hmi1001, mucmc52, uc100, uc101: move boards to vendor directory   Stefan Roese
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Albert ARIBAUD
• [U-Boot] [PATCH] powerpc/85xx: Fix SRIO LAW setup on corenet_ds boards   Kumar Gala
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Paulraj, Sandeep
• [U-Boot] [PATCH] powerpc/85xx: Fix SRIO LAW setup on corenet_ds boards   Wolfgang Denk
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] [PATCH] ARM: Update ARM mach-types   s-paulraj at ti.com
• [U-Boot] Debugging why my kernel won't start   Wolfgang Denk
• [U-Boot] [PATCH 1/2] TI: DaVinci DA850 EVM: add information regarding DA850 in README.davinci   Sekhar Nori
• [U-Boot] [PATCH v3 2/2] TI: DaVinci DA850 EVM: support passing maximum allowed cpu clock rate information to kernel   Sekhar Nori
• [U-Boot] [PATCH v3 2/2] TI: DaVinci DA850 EVM: support passing maximum allowed cpu clock rate information to kernel   Detlev Zundel
• [U-Boot] [PATCH] hmi1001, mucmc52, uc100, uc101: move boards to vendor directory   Detlev Zundel
• [U-Boot] Debugging why my kernel won't start   Rogan Dawes
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Mike Frysinger
• [U-Boot] Debugging why my kernel won't start   Wolfgang Denk
• [U-Boot] which protocol do I use to send S-record files when using the loads command ?   Peter Barada
• [U-Boot] which protocol do I use to send S-record files when using the loads command ?   Mangelschots, Jef
• [U-Boot] which protocol do I use to send S-record files when using the loads command ?   Wolfgang Denk
• [U-Boot] which protocol do I use to send S-record files when using the loads command ?   Wolfgang Denk
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Albert ARIBAUD
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Mike Frysinger
• [U-Boot] Please pull u-boot-cfi-flash/master (update)   Wolfgang Denk
• [U-Boot] [PATCH] bedbug_860.c: Fix return type to silence compile warnings.   Wolfgang Denk
• [U-Boot] [PATCH] ARM: Update ARM mach-types   Reinhard Meyer
• [U-Boot] [PATCH] ARM: Update ARM mach-types   Paulraj, Sandeep
• [U-Boot] [PATCH] ARM: Update ARM mach-types   Reinhard Meyer
• [U-Boot] [PATCH] ARM: Update ARM mach-types   Wolfgang Denk
• [U-Boot] [PATCH] ARM: Update ARM mach-types   Wolfgang Denk
• [U-Boot] which protocol do I use to send S-record files when using the loads command ?   Wolfgang Denk
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Martinez, Aldo
• [U-Boot] Italienische Geselschaft sucht sichere Partner.   wel014 at theia.denx.de
• [U-Boot] [PATCH 0/2 v5][U-BOOT] Zoom3: Add support for OMAP3630 Zoom3 board.   Martinez, Aldo
• [U-Boot] [PATCH] mpx85xx/fdt: Add cpu-release-addr for all cores   Matthew McClintock
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Albert ARIBAUD
• [U-Boot] commit f51cdaf1 breaks ve8313 board   Wolfgang Denk
• [U-Boot] [RFC][PATCH] mkimage: Add compatibility option for legacy Multi-File images   Thibaut Girka
• [U-Boot] commit a37c36f4 breaks several non-85xx boards   Wolfgang Denk
• [U-Boot] QorIQ NAND-Boot configs not building   Wolfgang Denk
• [U-Boot] Commit d708395d breaks omap2420h4 board...   Wolfgang Denk
• [U-Boot] [PATCH] non-working dns323 config   Wolfgang Denk
• [U-Boot] [PATCH] arch/arm/include/asm/arch-orion5x/cpu.h: fix incorrect comment   Wolfgang Denk
• [U-Boot] [PATCH V2] bedbug_860.c, bedbug_603e.c: Fix return type to silence compile warnings.   Wolfgang Denk
• [U-Boot] commit a37c36f4 breaks several non-85xx boards   Kim Phillips
• [U-Boot] [PATCH 0/3] omap2: i2c: minor cleanup   Nishanth Menon
• [U-Boot] [PATCH 1/3] i2c: omap2+: change header guard to be generic   Nishanth Menon
• [U-Boot] [PATCH 2/3] omap2: i2c: add syss offset   Nishanth Menon
• [U-Boot] [PATCH 3/3] omap2: i2c: remove redundant header definitions   Nishanth Menon
• [U-Boot] [PATCH 0/3] omap2: i2c: minor cleanup   Steve Sakoman
• [U-Boot] [PATCH 2/3] omap2: i2c: add syss offset   Steve Sakoman
• [U-Boot] [PATCH 1/3] i2c: omap2+: change header guard to be generic   Steve Sakoman
• [U-Boot] [PATCH 3/3] omap2: i2c: remove redundant header definitions   Steve Sakoman
• [U-Boot] [PATCH 1/2] ARMV7: S5P: make s5p-common for sharing the code between s5pc1xx and s5pc2xx   Minkyu Kang
• [U-Boot] [PATCH 2/2] ARMV7: S5P: rename from s5pc1xx to s5p   Minkyu Kang
• [U-Boot] [PATCH v3 2/2] TI: DaVinci DA850 EVM: support passing maximum allowed cpu clock rate information to kernel   Nori, Sekhar
• [U-Boot] [PATCH] non-working dns323 config   Rogan Dawes
• [U-Boot] [PATCH] non-working dns323 config   Wolfgang Denk
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Mike Frysinger
• [U-Boot] [PATCH v2] [TESTING] da8xx: fixup ARM relocation support   Sudhakar Rajashekhara
• [U-Boot] commit a37c36f4 breaks several non-85xx boards   Kumar Gala
• [U-Boot] [PATCH] non-working dns323 config   Rogan Dawes
• [U-Boot] commit a37c36f4 breaks several non-85xx boards   Wolfgang Denk
• [U-Boot] [PATCH] non-working dns323 config   Wolfgang Denk
• [U-Boot] [PATCH] powerpc/83xx: Fix build issue with ve8313 board due to lbus changes   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Rename Security Engine Job Queue to Job Ring to match docs   Kumar Gala
• [U-Boot] [PATCH] powerpc/8xxx: Fix quad-rank DIMMs support on corenet_ds board.   Kumar Gala
• [U-Boot] commit f51cdaf1 breaks ve8313 board   Kumar Gala
• [U-Boot] [PATCH] mpx85xx/fdt: Add cpu-release-addr for all cores   Kumar Gala
• [U-Boot] [PATCH] powerpc/85xx: Fix SRIO LAW setup on corenet_ds boards   Kumar Gala
• [U-Boot] [PATCH] fdt: call fdt_parent_offset fewer times while translating addresses   Kumar Gala
• [U-Boot] [PATCH] powerpc/83xx: Fix build issue with ve8313 board due to lbus changes   Kumar Gala
• [U-Boot] QorIQ NAND-Boot configs not building   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] [PATCH] eSPI and Intel E1000 support for P1/P2 RDB   Kumar Gala
• [U-Boot] [PATCHv2] net: Fix faulty definition of uec_initialize()   Joakim Tjernlund
• [U-Boot] QorIQ NAND-Boot configs not building   Wolfgang Denk
• [U-Boot] [PATCH v3 2/2] TI: DaVinci DA850 EVM: support passing maximum allowed cpu clock rate information to kernel   Stefano Babic
• [U-Boot] [PATCH] mpc5xxx_fec: add call to reset_phy() after PHY initialization   Ilya Yanok
• [U-Boot] [PATCH v3 2/2] TI: DaVinci DA850 EVM: support passing maximum allowed cpu clock rate information to kernel   Nori, Sekhar
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Stefano Babic
• [U-Boot] [PATCH 0/4] Add support for PRTLVT2 boards   David Jander
• [U-Boot] [PATCH 1/4] MX51: iomux: Added support for mxc_iomux_set_input()   David Jander
• [U-Boot] [PATCH 2/4] MX51: Added missing pin definition   David Jander
• [U-Boot] [PATCH 3/4] mc13982 driver: corrected/added some definitions according to latest user-manual   David Jander
• [U-Boot] [PATCH 4/4] Added initial support for PRTLVT2-based boards.   David Jander
• [U-Boot] [PATCH] coldfire m68k/mcf547x_8x : Fix relocation errors in start.S   Philippe De Muyter
• [U-Boot] [PATCH v2] [TESTING] da8xx: fixup ARM relocation support   Ben Gardiner
• [U-Boot] [PATCH 4/4] Added initial support for PRTLVT2-based boards.   Wolfgang Denk
• [U-Boot] NAND 16 bit buswidth issue   Pete Murray
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Mike Frysinger
• [U-Boot] [PATCH 4/4] Added initial support for PRTLVT2-based boards.   David Jander
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Stefano Babic
• [U-Boot] samsung s3c2440 support   C Nauman
• [U-Boot] [PATCH] powerpc/83xx: Fix build issue with ve8313 board due to lbus changes   Scott Wood
• [U-Boot] [PATCH v2] MAKEALL: cut down on duplication of targets   Mike Frysinger
• [U-Boot] [PATCH v2] MAKEALL: cut down on duplication of targets   Ben Gardiner
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Jef Mangelschots
• [U-Boot] [PATCH] mx51evk: Provide a proper reset for the Ethernet PHY   Fabio Estevam
• [U-Boot] which protocol do I use to send S-record files when using the loads command ?   Jef Mangelschots
• [U-Boot] Persönliche Informationen für Sie   gilberttalaki1 at terra.es
• [U-Boot] [PATCH] powerpc/83xx: Fix build issue with ve8313 board due to lbus changes   Kumar Gala
• [U-Boot] [PATCH v2] powerpc/83xx: Fix build issue with ve8313 board due to lbus changes   Kumar Gala
• [U-Boot] [PATCH V2] mpx85xx/fdt: Add cpu-release-addr for all cores   Matthew McClintock
• [U-Boot] NAND 16 bit buswidth issue   Scott Wood
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Rogan Dawes
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Wolfgang Denk
• [U-Boot] NAND 16 bit buswidth issue   Pete Murray
• [U-Boot] NAND 16 bit buswidth issue   Scott Wood
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Jef Mangelschots
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Wolfgang Denk
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Wolfgang Denk
• [U-Boot] [PATCH v2] MAKEALL: cut down on duplication of targets   Thomas Chou
• [U-Boot] Please pull u-boot-mpc85xx.git (fwd)   Kumar Gala
• [U-Boot] [PATCH v2] nios2: fix out of reach case for do_reset   Scott McNutt
• [U-Boot] [PATCH V2] mpx85xx/fdt: Add cpu-release-addr for all cores   Kumar Gala
• [U-Boot] Winning Code (AQ11WWRZZA1)!!!   British National Lottery
• [U-Boot] [PATCH 1/2 v2] ARMV7: S5P: make s5p-common for sharing the code between s5pc1xx and s5pc2xx   Minkyu Kang
• [U-Boot] [PATCH 2/2 v2] ARMV7: S5P: rename from s5pc1xx to s5p   Minkyu Kang
• [U-Boot] [PATCH] Align linebuf to avoid misaligned aliases of it   Albert ARIBAUD
• [U-Boot] u-boot-x86   sk ong
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Albert ARIBAUD
• [U-Boot] [PATCH 1/4] MX51: iomux: Added support for mxc_iomux_set_input()   Stefano Babic
• [U-Boot] [PATCH 2/4] MX51: Added missing pin definition   Stefano Babic
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Stefano Babic
• [U-Boot] [PATCH] mx51evk: Provide a proper reset for the Ethernet PHY   Stefano Babic
• [U-Boot] [PATCH 1/4] MX51: iomux: Added support for mxc_iomux_set_input ()   David Jander
• [U-Boot] [PATCH 2/4] MX51: Added missing pin definition   David Jander
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   David Jander
• [U-Boot] [PATCH 1/4] MX51: iomux: Added support for mxc_iomux_set_input()   Stefano Babic
• [U-Boot] [PATCH] S5P: mmc: fix the mmc offset   Minkyu Kang
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   David Jander
• [U-Boot] [PATCH 4/4] Added initial support for PRTLVT2-based boards.   Stefano Babic
• [U-Boot] [PATCH 1/8] PXA: pxafb: Add ACX517AKN support   Marek Vasut
• [U-Boot] [PATCH 2/8] common: Enable serial for PXA250   Marek Vasut
• [U-Boot] [PATCH 3/8 v2] PXA: Palm Tungsten|C Support   Marek Vasut
• [U-Boot] [PATCH 4/8] PXA: pxafb: Add support for Sharp LQ038J7DH53   Marek Vasut
• [U-Boot] [PATCH 5/8] PXA: Add initial Palm LifeDrive support   Marek Vasut
• [U-Boot] [PATCH 6/8] PXA: Voipac270 improvements   Marek Vasut
• [U-Boot] [PATCH 7/8] PXA: Balloon3 board support   Marek Vasut
• [U-Boot] [PATCH 8/8] PXA: Add missing MAINTAINERS entries   Marek Vasut
• [U-Boot] [PATCH 4/4] Added initial support for PRTLVT2-based boards.   Stefano Babic
• [U-Boot] [PULL] U-Boot-pxa pull request   Marek Vasut
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Stefano Babic
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   David Jander
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Stefano Babic
• [U-Boot] [PATCH 4/4] Added initial support for PRTLVT2-based boards.   David Jander
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   David Jander
• [U-Boot] [PATCH 4/4] Added initial support for PRTLVT2-based boards.   Stefano Babic
• [U-Boot] [PATCH V2] Use common function to set GPIOs for MX3 and MX5   Stefano Babic
• [U-Boot] [PATCH] ARM: Use syslib functions for all CORTEXA8   Stefano Babic
• [U-Boot] [PATCH] MX51: Added pins definition to set up pads   Stefano Babic
• [U-Boot] [PATCH] MX51: add structure to access System Reset Controller   Stefano Babic
• [U-Boot] [PATCH] MXC: Add watchdog support to serial driver   Stefano Babic
• [U-Boot] [PATCH] MX51: Drop unused header file for mx51evk   Stefano Babic
• [U-Boot] [PATCH] MX51: add structure to access System Reset Controller   Sergei Shtylyov
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Stefano Babic
• [U-Boot] [PATCH] MX51: add structure to access System Reset Controller   Stefano Babic
• [U-Boot] [PATCH] Support for Calao USB A9263 board based on AT91SAM9263 CPU   Reinhard Meyer
• [U-Boot] [PATCH v3] [ARM] at91: Add support for taskit AT91SAM9G20 boards   Reinhard Meyer
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   David Jander
• [U-Boot] [PATCH v4] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is defined   Reinhard Meyer
• [U-Boot] Account upgrade   Web Admin
• [U-Boot] [PATCH v3 1/3] at91: Defined main clock frequency on esd at91 boards   Reinhard Meyer
• [U-Boot] [PATCH v5 2/3] at91: Update meesc board to new SoC access   Reinhard Meyer
• [U-Boot] [PATCH v3 3/3] at91: Enabeling USB host on meesc board   Reinhard Meyer
• [U-Boot] [PATCH] I2C: Add support for multiple I2C busses for SNTP (effect to RTC)   Stephan Linz
• [U-Boot] [PATCH v4 2/2] cpuat91: update defaut environement   Reinhard Meyer
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Stefano Babic
• [U-Boot] [PATCH v2] AT91: add RTT and GPBR based RTC   Reinhard Meyer
• [U-Boot] [PATCH] I2C: Add support for multiple I2C busses for SNTP (effect to RTC)   Wolfgang Denk
• [U-Boot] [PATCH v3] AT91SAM9XE: add embedded flash support   Reinhard Meyer
• [U-Boot] [PATCH] ARM: Update ARM mach-types   Paulraj, Sandeep
• [U-Boot] [PATCH] mx51evk: Provide a proper reset for the Ethernet PHY   Fabio Estevam
• [U-Boot] [PATCH] mx51evk: Provide a proper reset for the Ethernet PHY   Stefano Babic
• [U-Boot] [PATCH] mx51evk: Provide a proper reset for the Ethernet PHY   Fabio Estevam
• [U-Boot] [PATCH] I2C: Add support for multiple I2C busses for SNTP (effect to RTC)   Stephan Linz
• [U-Boot] [PATCH v2] powerpc/83xx: Fix build issue with ve8313 board due to lbus changes   Becky Bruce
• [U-Boot] [PATCH v4] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is defined   Mike Frysinger
• [U-Boot] [PATCH v2] powerpc/83xx: Fix build issue with ve8313 board due to lbus changes   Scott Wood
• [U-Boot] [PATCH] always relocate fdt into an lmb-allocated memory block   Timur Tabi
• [U-Boot] [PATCH v4] at91: Don't initialize watchdog if CONFIG_SKIP_WATCHDOG_INIT is defined   Reinhard Meyer
• [U-Boot] Western Union   Christine.Rey-Caillat at ac-orleans-tours.fr
• [U-Boot] Undelivered Mail Returned to Sender   Mail Delivery System
• [U-Boot] u-boot-x86   Graeme Russ
• [U-Boot] [PATCH 04/16] MX51: add structure to access System Reset Controller   Stefano Babic
• [U-Boot] Loan Offer @3% Apply Now!!!   ©NationWide Loan
• [U-Boot] [PATCH] Add support for the MPC5121e USB Host controller.   Damien Dusha
• [U-Boot] [PATCH 00/13] x86: Various Patches   Graeme Russ
• [U-Boot] [PATCH 01/13] x86: Fix do_go_exec() - const argv[]   Graeme Russ
• [U-Boot] [PATCH 02/13] x86: Add do_bdinfo()   Graeme Russ
• [U-Boot] [PATCH 03/13] x86: Fix x86 Cold Boot   Graeme Russ
• [U-Boot] [PATCH 04/13] x86: Remove Unmaintained Boards   Graeme Russ
• [U-Boot] [PATCH 05/13] x86: Make CONFIG_RELOC_FIXUP_WORKS generic for all x86 boards   Graeme Russ
• [U-Boot] [PATCH 06/13] x86: Use TEXT_BASE in linker scripts   Graeme Russ
• [U-Boot] [PATCH 07/13] x86: zboot update   Graeme Russ
• [U-Boot] [PATCH 08/13] x86: use gc sections to reduce image size   Graeme Russ
• [U-Boot] [PATCH 09/13] x86: Move loading of GTD to C code   Graeme Russ
• [U-Boot] [PATCH 10/13] x86: Coding Style Cleanup   Graeme Russ
• [U-Boot] [PATCH 11/13] eNET: Add eNET_RAM_config   Graeme Russ
• [U-Boot] [PATCH 12/13] eNET: Fix eNET Interrupt Setup for Linux   Graeme Russ
• [U-Boot] [PATCH 13/13] x86: Add RTC support to eNET   Graeme Russ
• [U-Boot] u-boot-x86   Robert Schwebel
• [U-Boot] [PATCH 1/2] UEC: Don't udelay needlessly   Ben Warren
• [U-Boot] [PATCH v2] [TESTING] da8xx: fixup ARM relocation support   Heiko Schocher
• [U-Boot] [PATCH] hmi1001, mucmc52, uc100, uc101: move boards to vendor directory   Heiko Schocher
• [U-Boot] Pull request: u-boot-i2c   Heiko Schocher
• [U-Boot] samsung s3c2440 support   Minkyu Kang
• [U-Boot] [PATCH 1/2 v2] ARMV7: S5P: make s5p-common for sharing the code between s5pc1xx and s5pc2xx   Minkyu Kang
• [U-Boot] [PATCH 2/2 v2] ARMV7: S5P: rename from s5pc1xx to s5p   Minkyu Kang
• [U-Boot] [PATCH] S5P: mmc: fix the mmc offset   Minkyu Kang
• [U-Boot] [PATCH] I2C: Add support for multiple I2C busses for SNTP (effect to RTC)   Heiko Schocher
• [U-Boot] [PATCH 05/13] x86: Make CONFIG_RELOC_FIXUP_WORKS generic for all x86 boards   Heiko Schocher
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Ben Warren
• [U-Boot] help with HP mv2120 debricking   Miroslav Petricek
• [U-Boot] [PATCH] I2C: Add support for multiple I2C busses for SNTP (effect to RTC)   Stephan Linz
• [U-Boot] help with HP mv2120 debricking   Marek Vasut
• [U-Boot] help with HP mv2120 debricking   Rogan Dawes
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Joakim Tjernlund
• [U-Boot] [PATCH 05/13] x86: Make CONFIG_RELOC_FIXUP_WORKS generic for all x86 boards   Sergei Shtylyov
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   David Jander
• [U-Boot] AUTO: Richard Strange is out of the office. (returning 31/08/2010)   Richard.Strange at invensysrail.com
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   David Jander
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Stefano Babic
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Stefano Babic
• [U-Boot] [PATCH] ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5P   Minkyu Kang
• [U-Boot] help with HP mv2120 debricking   Bas Mevissen
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   David Jander
• [U-Boot] Amazing Discover >>> http://www.gracehub.com   somchai katnimit
• [U-Boot] [PATCH v2] [TESTING] da8xx: fixup ARM relocation support   Sudhakar Rajashekhara
• [U-Boot] [PATCH v3] [TESTING] da8xx: fixup ARM relocation support   Ben Gardiner
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   David Jander
• [U-Boot] Compact Flash Support on Omap 3530   Yau Kwong K (Tony)
• [U-Boot] Non-experimental U-Boot compilation   sandeep suresh
• [U-Boot] [PATCH] Add generic support for samsung s3c2440   C Nauman
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Ben Warren
• [U-Boot] Non-experimental U-Boot compilation   Reinhard Meyer
• [U-Boot] Kernel copy from NOR to RAM   Nicolas Luna
• [U-Boot] [PATCH] UEC PHY: Speed up initial PHY neg.   Joakim Tjernlund
• [U-Boot] Kernel copy from NOR to RAM   Albert ARIBAUD
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Detlev Zundel
• [U-Boot] Kernel copy from NOR to RAM   Nicolas Luna
• [U-Boot] Kernel copy from NOR to RAM   Nishanth Menon
• [U-Boot] Start/stop of network devices (was: Re: [PATCH] UEC PHY: Speed up initial PHY neg.)   Detlev Zundel
• [U-Boot] Kernel copy from NOR to RAM   Nicolas Luna
• [U-Boot] Kernel copy from NOR to RAM   Rogan Dawes
• [U-Boot] Kernel copy from NOR to RAM   Detlev Zundel
• [U-Boot] Kernel copy from NOR to RAM   Nicolas Luna
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Stefano Babic
• [U-Boot] DNS323 (Orion5x) must double ORION5X_SZ_BOOTROM to access full flash   Rogan Dawes
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   Mike Frysinger
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Grant Edwards
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Stefan Roese
• [U-Boot] Kernel copy from NOR to RAM   Stefano Babic
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Detlev Zundel
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Detlev Zundel
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Grant Edwards
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Ben Warren
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Detlev Zundel
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   Mike Frysinger
• [U-Boot] [PATCH] Fixing spi erase for S25FL128P_256K   Mike Frysinger
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Grant Edwards
• [U-Boot] FW: which protocol do I use to send S-record files when using the loads command ?   Grant Edwards
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Mike Frysinger
• [U-Boot] [PATCH] video: cfb_console: add support for 4bpp bitmaps with GDF_32BIT_X888RGB   Timur Tabi
• [U-Boot] Add support for Winbond W25Q64 SPI flash (updated)   Mike Frysinger
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   Mike Frysinger
• [U-Boot] [PATCH] Fixing spi erase for S25FL128P_256K   Mike Frysinger
• [U-Boot] [PATCH] SPI: cmd_spi.c: add option to specify bus and mode   Mike Frysinger
• [U-Boot] DNS323 (Orion5x) must double ORION5X_SZ_BOOTROM to access full flash   Albert ARIBAUD
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   David Jander
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   David Jander
• [U-Boot] Driver for CONFIG_CF_QSPI   TsiChung Liew
• [U-Boot] Invitation to connect on LinkedIn   yefeng fan
• [U-Boot] DNS323 (Orion5x) must double ORION5X_SZ_BOOTROM to access full flash   Rogan Dawes
• [U-Boot] [PATCH] ARMV7: S5P: fix the macro at samsung_get_base function   Minkyu Kang
• [U-Boot] [PATCH] ARMV7: S5P: separate the peripheral clocks   Minkyu Kang
• [U-Boot] [PATCH] SPI: cmd_spi.c: add option to specify bus and mode   Reinhard Meyer
• [U-Boot] i.mx51 nand boot.   周书林
• [U-Boot] Non-experimental U-Boot compilation   Reinhard Meyer
• [U-Boot] Booting from Nand based on i.MX51   shulin.zhou
• [U-Boot] Booting from Nand Flash base on i.MX51.   shulin.zhou
• [U-Boot] Non-experimental U-Boot compilation   sandeep suresh
• [U-Boot] Non-experimental U-Boot compilation   Reinhard Meyer
• [U-Boot] Booting from Nand Flash base on i.MX51.   Stefano Babic
• [U-Boot] [PATCH] Add generic support for samsung s3c2440   Minkyu Kang
• [U-Boot] [PATCH] SPI: cmd_spi.c: add option to specify bus and mode   Reinhard Meyer
• [U-Boot] Loan Offer !!!   PAYDAY LOAN
• [U-Boot] DNS323 (Orion5x) must double ORION5X_SZ_BOOTROM to access full flash   Albert ARIBAUD
• [U-Boot] [PATCH v3] [TESTING] da8xx: fixup ARM relocation support   Sudhakar Rajashekhara
• [U-Boot] DNS323 (Orion5x) must double ORION5X_SZ_BOOTROM to access full flash   Rogan Dawes
• [U-Boot] DNS323 (Orion5x) must double ORION5X_SZ_BOOTROM to access full flash   Albert ARIBAUD
• [U-Boot] Non-experimental U-Boot compilation   Xu, Hong
• [U-Boot] [PATCH] Orion5x: bugfix: window size (mis)calculation   Albert Aribaud
• [U-Boot] [PATCH] Add support for the MPC5121e USB Host controller.   Einar Már Björgvinsson
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   Mike Frysinger
• [U-Boot] [PATCH v2] Add generic support for samsung s3c2440   C Nauman
• [U-Boot] [PATCH] AT91: fix at91sam9260.h for AT91SAM9XE   Reinhard Meyer
• [U-Boot] Start/stop of network devices (was: Re: [PATCH] UEC PHY: Speed up initial PHY neg.)   Joakim Tjernlund
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   David Jander
• [U-Boot] [PATCH v2] AT91: fix at91sam9260.h for AT91SAM9XE   Reinhard Meyer
• [U-Boot] TEST - please ignore   Reinhard Meyer
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   Mike Frysinger
• [U-Boot] Creating a new Bootloader   Boswell, Patrick
• [U-Boot] [PATCH] SPI: cmd_spi.c: add option to specify bus and mode   Mike Frysinger
• [U-Boot] Creating a new Bootloader   Albert ARIBAUD
• [U-Boot] [PATCH] Add support for the MPC5121e USB Host controller.   Damien Dusha
• [U-Boot] [PATCH v2] AT91: add RTT and GPBR based RTC   Xu, Hong
• [U-Boot] [PATCH v2] AT91: add RTT and GPBR based RTC   Reinhard Meyer
• [U-Boot] [PATCH v2] AT91: add RTT and GPBR based RTC   Reinhard Meyer
• [U-Boot] DNS323 (Orion5x) must double ORION5X_SZ_BOOTROM to access full flash   Prafulla Wadaskar
• [U-Boot] [PATCH] ARMV7: S5P: rename the member of gpio structure   Minkyu Kang
• [U-Boot] [PATCH v2] AT91: add RTT and GPBR based RTC   Xu, Hong
• [U-Boot] [STATUS] Release delayed   Wolfgang Denk
• [U-Boot] [PATCH v2] AT91: add RTT and GPBR based RTC   Reinhard Meyer
• [U-Boot] bootprocess and steps to approach code   ANIL
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   David Jander
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] u-boot-x86   Graeme Russ
• [U-Boot] [PATCH] Add support for the MPC5121e USB Host controller.   Einar Már Björgvinsson
• [U-Boot] [PATCH v3] AT91: fix at91sam9260.h for AT91SAM9XE   Reinhard Meyer
• [U-Boot] [PATCH v3] AT91: add RTT and GPBR based RTC   Reinhard Meyer
• [U-Boot] [PATCH v4] AT91: add RTT and GPBR based RTC   Reinhard Meyer
• [U-Boot] [PATCH] CMD_I2C: make alen=0 work   Reinhard Meyer
• [U-Boot] NFS 'Loading: *_*** ERROR: Cannot mount'   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH] NET: add ENC28J60 driver using SPI framework   Reinhard Meyer
• [U-Boot] [PATCH] AT91/AVR32: atmel_spi.c: flush RDR before next SPI transaction   Reinhard Meyer
• [U-Boot] [PATCH] AT91: add 2nd SPI to 9260/9XE/9G20   Reinhard Meyer
• [U-Boot] [PATCH] AT91: add option to enable pullups in at91sam9260_devices.c   Reinhard Meyer
• [U-Boot] [PATCH] Add support for the MPC5121e USB Host controller.   Damien Dusha
• [U-Boot] u-boot-x86   sk ong
• [U-Boot] [PATCH] mpc8308_p1m: support for MPC8308 P1M board   Ilya Yanok
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Albert Aribaud
• [U-Boot] [PATCH 2/2] edminiv2: add I2C support using mvtwsi driver   Albert Aribaud
• [U-Boot] u-boot-x86   Graeme Russ
• [U-Boot] [PATCH] ppc4xx: Fix APC405 board support   Matthias Fuchs
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Albert ARIBAUD
• [U-Boot] u-boot-x86   sk ong
• [U-Boot] [Nios] Pull Request   Scott McNutt
• [U-Boot] winner   Western Union Center
• [U-Boot] logbuffer functionality still broken?   CEVAN Ondrej
• [U-Boot] USBTTY and OMAP-L138 EVM (da850evm)   Jeremy Torres
• [U-Boot] [PATCH 2/2] cmp_bmp: allow negative X, Y values for display command   Timur Tabi
• [U-Boot] hello   justina benson
• [U-Boot] [PATCH] MTD: Add support for S25FL032P spi nor-flash   Mike Frysinger
• [U-Boot] [PATCH] SPI: cmd_spi.c: add option to specify bus and mode   Mike Frysinger
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH] NET: add ENC28J60 driver using SPI framework   Mike Frysinger
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Prafulla Wadaskar
• [U-Boot] [PATCH] Orion5x: bugfix: window size (mis)calculation   Prafulla Wadaskar
• [U-Boot] [PATCH] Kirkwood: bugfix: window size (mis)calculation   Prafulla Wadaskar
• [U-Boot] Pull request u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [PATCH] SPI: cmd_spi.c: add option to specify bus and mode   Reinhard Meyer
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH] NET: add ENC28J60 driver using SPI framework   Reinhard Meyer
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Heiko Schocher
• [U-Boot] [PATCH] NET: add ENC28J60 driver using SPI framework   Mike Frysinger
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Albert ARIBAUD
• [U-Boot] [PATCH] CMD_I2C: make alen=0 work   Heiko Schocher
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Albert ARIBAUD
• [U-Boot] Pull request v2: u-boot-i2c   Heiko Schocher
• [U-Boot] [PATCH] NET: add ENC28J60 driver using SPI framework   Reinhard Meyer
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Heiko Schocher
• [U-Boot] [PATCH] NET: add ENC28J60 driver using SPI framework   Mike Frysinger
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Prafulla Wadaskar
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH v2] Add generic support for samsung s3c2440   Minkyu Kang
• [U-Boot] [PATCH] ARMV7: S5P: rename from CONFIG_S5PC1XX to CONFIG_S5P   Minkyu Kang
• [U-Boot] [PATCH] ARMV7: S5P: fix the macro at samsung_get_base function   Minkyu Kang
• [U-Boot] [PATCH v2] SPI: cmd_spi.c: add options to specify bus and mode   Reinhard Meyer
• [U-Boot] [PATCH] Use common function to set GPIOs for MX3 and MX5   Detlev Zundel
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH v2] SPI: cmd_spi.c: add options to specify bus and mode   Mike Frysinger
• [U-Boot] [PATCH] Kirkwood: bugfix: window size (mis)calculation   Prafulla Wadaskar
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Albert ARIBAUD
• [U-Boot] Non-experimental U-Boot compilation   sandeep suresh
• [U-Boot] [PATCH 01/11] arm/pxa: remove unused u-boot.lds from board/vpac270   Mikhail Kshevetskiy
• [U-Boot] [PATCH 02/11] arm/pxa: fix board/vpac270/vpac270.c compilation if usb support is disabled   Mikhail Kshevetskiy
• [U-Boot] [PATCH 03/11] arm/pxa: enable stuart/btuart for vpac270   Mikhail Kshevetskiy
• [U-Boot] [PATCH 04/11] arm/pxa: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000   Mikhail Kshevetskiy
• [U-Boot] [PATCH 05/11] arm/pxa: fix environment location/length for vpac270 and related bugs.   Mikhail Kshevetskiy
• [U-Boot] [PATCH 06/11] arm/pxa: remove CONFIG_ENV_OVERWRITE from vpac270 config   Mikhail Kshevetskiy
• [U-Boot] [PATCH 07/11] arm/pxa: decrease environment size and stack size for vpac270   Mikhail Kshevetskiy
• [U-Boot] [PATCH 08/11] arm/pxa: increase CONFIG_SYS_MALLOC_LEN to (196Kb + space for environment)   Mikhail Kshevetskiy
• [U-Boot] [PATCH 09/11] arm/pxa: fix number of cfi flashes in vpac270   Mikhail Kshevetskiy
• [U-Boot] [PATCH 10/11] arm/pxa: fix sdram memory layout for vpac270   Mikhail Kshevetskiy
• [U-Boot] [PATCH 11/11] arm/pxa: fix and cleanup of pxa_mem_setup macro v2   Mikhail Kshevetskiy
• [U-Boot] hii   sylvia Benson
• [U-Boot] [PATCH 05/11] arm/pxa: fix environment location/length for vpac270 and related bugs.   Marek Vasut
• [U-Boot] [PATCH 06/11] arm/pxa: remove CONFIG_ENV_OVERWRITE from vpac270 config   Marek Vasut
• [U-Boot] [PATCH 07/11] arm/pxa: decrease environment size and stack size for vpac270   Marek Vasut
• [U-Boot] [PATCH 08/11] arm/pxa: increase CONFIG_SYS_MALLOC_LEN to (196Kb + space for environment)   Marek Vasut
• [U-Boot] [PATCH 09/11] arm/pxa: fix number of cfi flashes in vpac270   Marek Vasut
• [U-Boot] [PATCH 10/11] arm/pxa: fix sdram memory layout for vpac270   Marek Vasut
• [U-Boot] [PATCH] Orion5x: Correct DRAM bank detection   Rogan Dawes
• [U-Boot] [PATCH 2/4] net: Move Emaclite to NET_MULTI   Michal Simek
• [U-Boot] [PATCH 4/4] net: Add LL TEMAC driver to u-boot   Michal Simek
• [U-Boot] [PATCH 11/11] arm/pxa: fix and cleanup of pxa_mem_setup macro v2   Marek Vasut
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   Marek Vasut
• [U-Boot] [PATCH] IDE: Don't assume there are always two devices per bus   Rogan Dawes
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] [PATCH] ppc4xx: Fix 440EPx bug in reconfigure_pll()   Stefan Roese
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   Marek Vasut
• [U-Boot] [PATCH v3] Add generic support for samsung s3c2440   C Nauman
• [U-Boot] [PATCH] ppc4xx: Fix 440EPx bug in reconfigure_pll()   Victor Gallardo
• [U-Boot] [PATCH v4 2/4] mtdparts: show net size in mtdparts list   Scott Wood
• [U-Boot] [PATCH 1/8] (RESEND) arm/pxa: remove unused u-boot.lds from board/vpac270   Mikhail Kshevetskiy
• [U-Boot] [PATCH 2/8] (RESEND) arm/pxa: enable stuart/btuart for vpac270   Mikhail Kshevetskiy
• [U-Boot] [PATCH 3/8] arm/pxa: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000 (v.2)   Mikhail Kshevetskiy
• [U-Boot] [PATCH 4/8] arm/pxa: fix environment sector size, kernel and environment location for vpac270 (v.2)   Mikhail Kshevetskiy
• [U-Boot] [PATCH 5/8] arm/pxa: decrease environment size and stack size for vpac270 (v.2)   Mikhail Kshevetskiy
• [U-Boot] [PATCH 6/8] arm/pxa: increase CONFIG_SYS_MALLOC_LEN to (196Kb + space for environment) (v.2)   Mikhail Kshevetskiy
• [U-Boot] [PATCH 7/8] arm/pxa: fix MDREFR[APD] bit setting   Mikhail Kshevetskiy
• [U-Boot] [PATCH 8/8] arm/pxa: fix and cleanup of pxa_mem_setup macro (v.3)   Mikhail Kshevetskiy
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH 3/3] mpc8610: refactor DIU initialization code to use existing bitmap function   Timur Tabi
• [U-Boot] [PATCH 0/8] Add support for new SoC APM82XXX   tmarri at apm.com
• [U-Boot] [PATCH 1/8] APM82xxx: Add CPU support   tmarri at apm.com
• [U-Boot] [PATCH 2/8] APM82xxx: Add Common register definitions   tmarri at apm.com
• [U-Boot] [PATCH 3/8] APM82xxx: Add clock speed calculations   tmarri at apm.com
• [U-Boot] [PATCH 4/8] APM82xxx: Add DDR support   tmarri at apm.com
• [U-Boot] [PATCH 5/8] APM82xxx: Add UIC support   tmarri at apm.com
• [U-Boot] [PATCH 6/8] APM82xxx: Add SRAM support   tmarri at apm.com
• [U-Boot] [PATCH 7/8] APM82xxx: Add bluestone board support   tmarri at apm.com
• [U-Boot] [PATCH 8/8] APM82xxx: Add top level common file changes   tmarri at apm.com
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Scott Wood
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Albert ARIBAUD
• [U-Boot] [PATCH v4 4/4] mtdparts: new add.spread: add part skipping bad blocks   Scott Wood
• [U-Boot] [PATCH V2 0/4] Improve I2C for orion5x, kirkwood and ED Mini V2   Albert Aribaud
• [U-Boot] [PATCH V2 1/4] suen3: remove CONFIG_HARD_I2C and related defines   Albert Aribaud
• [U-Boot] [PATCH V2 2/4] i2c: rename kirkwood_i2c to mvtwsi   Albert Aribaud
• [U-Boot] [PATCH V2 3/4] i2c: rewrite mvtwsi, support orion5x and kirkwood   Albert Aribaud
• [U-Boot] [PATCH V2 4/4] edminiv2: add I2C support using mvtwsi driver   Albert Aribaud
• [U-Boot] [PATCH] orion5x: fix comment-in-comment typo in cpu.h   Albert Aribaud
• [U-Boot] [PATCH] Orion5x: bugfix: window size (mis)calculation   Chris Moore
• [U-Boot] [PATCH 1/2] TI: DaVinci DA850 EVM: add information regarding DA850 in README.davinci   Sekhar Nori
• [U-Boot] [PATCH v4 2/2] TI: DaVinci DA850 EVM: support passing maximum allowed cpu clock rate information to kernel   Sekhar Nori
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Heiko Schocher
• [U-Boot] [PATCH V2 3/4] i2c: rewrite mvtwsi, support orion5x and kirkwood   Heiko Schocher
• [U-Boot] [PATCH] Orion5x: bugfix: window size (mis)calculation   Albert ARIBAUD
• [U-Boot] [PATCH] Orion5x: bugfix: window size (mis)calculation   Albert ARIBAUD
• [U-Boot] [PATCH 1/2] I2C: add Marvell TWSI simple driver   Albert ARIBAUD
• [U-Boot] [PATCH V3 0/4] Improve I2C for orion5x, kirkwood and ED Mini V2   Albert Aribaud
• [U-Boot] [PATCH V3 1/4] suen3: remove CONFIG_HARD_I2C and related defines   Albert Aribaud
• [U-Boot] [PATCH V3 2/4] i2c: rename kirkwood_i2c to mvtwsi   Albert Aribaud
• [U-Boot] [PATCH V3 3/4] i2c: rewrite mvtwsi, support orion5x and kirkwood   Albert Aribaud
• [U-Boot] [PATCH V3 4/4] edminiv2: add I2C support using mvtwsi driver   Albert Aribaud
• [U-Boot] Kernel panic - not syncing: No init found. Try passing init= option to kernel.   sandeep suresh
• [U-Boot] Standalone application using saveenv   Hans Tornquist
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] [PATCH 1/8] APM82xxx: Add CPU support   Stefan Roese
• [U-Boot] [PATCH 2/8] APM82xxx: Add Common register definitions   Stefan Roese
• [U-Boot] [PATCH 1/8] APM82xxx: Add CPU support   Stefan Roese
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   Marek Vasut
• [U-Boot] [PATCH 7/8] APM82xxx: Add bluestone board support   Stefan Roese
• [U-Boot] [PATCH 8/8] APM82xxx: Add top level common file changes   Stefan Roese
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Reinhard Meyer
• [U-Boot] u-boot-x86   Detlev Zundel
• [U-Boot] NFS 'Loading: *_*** ERROR: Cannot mount'   Detlev Zundel
• [U-Boot] [PATCH 5/8] APM82xxx: Add UIC support   Sergei Shtylyov
• [U-Boot] [PATCH 6/8] APM82xxx: Add SRAM support   Sergei Shtylyov
• [U-Boot] [PATCH v2] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH 2/2] cmp_bmp: allow negative X, Y values for display command   Detlev Zundel
• [U-Boot] [ELDK] Not able to Uncompress Multi Image   Detlev Zundel
• [U-Boot] [PATCH] orion5x: fix comment-in-comment typo in cpu.h   Prafulla Wadaskar
• [U-Boot] [PATCH 2/2] cmp_bmp: allow negative X, Y values for display command   Tabi Timur-B04825
• [U-Boot] [PATCH V3 2/4] i2c: rename kirkwood_i2c to mvtwsi   Prafulla Wadaskar
• [U-Boot] [PATCH V3 4/4] edminiv2: add I2C support using mvtwsi driver   Prafulla Wadaskar
• [U-Boot] [PATCH V3 3/4] i2c: rewrite mvtwsi, support orion5x and kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH V3 3/4] i2c: rewrite mvtwsi, support orion5x and kirkwood   Albert ARIBAUD
• [U-Boot] [PATCH 2/2] cmp_bmp: allow negative X, Y values for display command   Detlev Zundel
• [U-Boot] [PATCH V3 4/4] edminiv2: add I2C support using mvtwsi driver   Albert ARIBAUD
• [U-Boot] [PATCH v4 2/4] mtdparts: show net size in mtdparts list   Ben Gardiner
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] [PATCH v4 4/4] mtdparts: new add.spread: add part skipping bad blocks   Ben Gardiner
• [U-Boot] [PATCH 2/2] cmp_bmp: allow negative X, Y values for display command   Tabi Timur-B04825
• [U-Boot] [PATCH 2/2] cmp_bmp: allow negative X, Y values for display command   Reinhard Meyer
• [U-Boot] [PATCH 2/2] cmp_bmp: allow negative X, Y values for display command   Tabi Timur-B04825
• [U-Boot] [PATCH V3 3/4] i2c: rewrite mvtwsi, support orion5x and kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH V3 3/4] i2c: rewrite mvtwsi, support orion5x and kirkwood   Albert ARIBAUD
• [U-Boot] [PATCH v4 2/4] mtdparts: show net size in mtdparts list   Ben Gardiner
• [U-Boot] [PATCH v4 2/4] mtdparts: show net size in mtdparts list   Scott Wood
• [U-Boot] [PATCH V4 0/4] Improve I2C for orion5x, kirkwood and ED Mini V2   Albert Aribaud
• [U-Boot] [PATCH V4 1/4] suen3: remove CONFIG_HARD_I2C and related defines   Albert Aribaud
• [U-Boot] [PATCH V4 2/4] i2c: rename kirkwood_i2c to mvtwsi   Albert Aribaud
• [U-Boot] [PATCH V4 3/4] i2c: rewrite mvtwsi, support orion5x and kirkwood   Albert Aribaud
• [U-Boot] [PATCH V4 4/4] edminiv2: add I2C support using mvtwsi driver   Albert Aribaud
• [U-Boot] [PATCH v4 2/4] mtdparts: show net size in mtdparts list   Ben Gardiner
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Mike Frysinger
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Stefano Babic
• [U-Boot] [PATCH 7/8] APM82xxx: Add bluestone board support   Feng Kan
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Reinhard Meyer
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Reinhard Meyer
• [U-Boot] [PATCH] video: cfb_console: fix definition and usage of CURSOR_xxx macros   Timur Tabi
• [U-Boot] [PATCH 2/2] cmp_bmp: allow negative X, Y values for display command   Timur Tabi
• [U-Boot] [PATCH 3/3] mpc8610: refactor DIU initialization code to use existing bitmap function   Timur Tabi
• [U-Boot] [PATCH 1/7] fix dma for 36bit addressing   York Sun
• [U-Boot] [PATCH 2/7] Expand POST memory test to support arch-depended implementation.   York Sun
• [U-Boot] [PATCH 3/7] Add memory test feature for mpc85xx POST.   York Sun
• [U-Boot] [PATCH 4/7] Enabled POST for generic mpc85xx   York Sun
• [U-Boot] [PATCH 5/7] Enable POST memory test for corenet_ds   York Sun
• [U-Boot] [PATCH 6/7] Enable POST memory test for P2020DS   York Sun
• [U-Boot] [PATCH 7/7] Fix parameters to support RDIMM for P2020DS   York Sun
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Scott Wood
• [U-Boot] Why does logo_plot() not use video_display_bitmap()?   Timur Tabi
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Scott Wood
• [U-Boot] Request to become a member of u-boot-users mailing list   chandra sekhar
• [U-Boot] "UnCorrectable RS-ECC Error" occurs when reading NAND flash under u-boot 2009.08 for i.mx25   dajiang.zhong at tektronix.com
• [U-Boot] "UnCorrectable RS-ECC Error" occurs when reading NAND flash under u-boot 2009.08 for i.mx25   dajiang
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] "UnCorrectable RS-ECC Error" occurs when reading NAND flash under u-boot 2009.08 for i.mx25   dajiang
• [U-Boot] [PATCH] Orion5x: bugfix: window size (mis)calculation   Chris Moore
• [U-Boot] Request to become a member of u-boot-users mailing list   Mike Frysinger
• [U-Boot] Request to become a member of u-boot-users mailing list   Anatolij Gustschin
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Albert ARIBAUD
• [U-Boot] [PATCH] Disaligned buffer in print_buffer   Reinhard Meyer
• [U-Boot] Assistentin gesucht! Hohes Gehalt.   sales at lorventravels.com
• [U-Boot] [PATCH 3/7] Add memory test feature for mpc85xx POST.   Wolfgang Denk
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH v2] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH v2] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH v2] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH v1] add mv_sdio driver for sheevaplug   Gérald Kerma
• [U-Boot] [PATCH v2] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] Debugging, Why USB is not stable   Gérald Kerma
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] u-boot   Ò»ºÅ º«
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Mike Frysinger
• [U-Boot] [PATCH] MTD/SPI/FLASH: add support for Ramtron FRAMs using SPI   Reinhard Meyer
• [U-Boot] [PATCH 2/7] Expand POST memory test to support arch-depended implementation.   Wolfgang Denk
• [U-Boot] [PATCH 4/7] Enabled POST for generic mpc85xx   Wolfgang Denk
• [U-Boot] [PATCH 5/7] Enable POST memory test for corenet_ds   Wolfgang Denk
• [U-Boot] Why does logo_plot() not use video_display_bitmap()?   Wolfgang Denk
• [U-Boot] [PATCH 7/8] APM82xxx: Add bluestone board support   Wolfgang Denk
• [U-Boot] [PATCH 2/8] APM82xxx: Add Common register definitions   Wolfgang Denk
• [U-Boot] [PATCH 4/8] APM82xxx: Add DDR support   Wolfgang Denk
• [U-Boot] [PATCH 5/8] APM82xxx: Add UIC support   Wolfgang Denk
• [U-Boot] [PATCH 7/8] APM82xxx: Add bluestone board support   Wolfgang Denk
• [U-Boot] [PATCH 8/8] APM82xxx: Add top level common file changes   Wolfgang Denk
• [U-Boot] [PATCH] at91_emac.h: fix typo in register definition   Andreas Bießmann
• [U-Boot] Why does logo_plot() not use video_display_bitmap()?   Timur Tabi
• [U-Boot] [RFC][PATCH] mkimage: Add compatibility option for legacy Multi-File images   Per Andersson
• [U-Boot] [PATCH 2/7] Expand POST memory test to support arch-depended implementation.   sun york-R58495
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] TFTP timeout issue while downloading the linux kernel in openpxa vpac270 u-boot source code   Marek Vasut
• [U-Boot] android fastboot support on U-boot   shulin.zhou
• [U-Boot] [PATCH] ARMV7: S5P: separate the peripheral clocks   Minkyu Kang
• [U-Boot] [PATCH] ARMV7: S5P: rename the member of gpio structure   Minkyu Kang
• [U-Boot] [PATCH V3] AT91 Fix: return value of get_tbclk   Alexander Stein
• [U-Boot] TFTP load for file over 50MB fails   StephenPaulraj Chinnadurai-ERS,HCLTech
• [U-Boot] Pull request u-boot-sh4   Nobuhiro Iwamatsu
• [U-Boot] [ELDK] Not able to Uncompress Multi Image   Zoolu R
• [U-Boot] [PATCH] video: cfb_console: fix definition and usage of CURSOR_xxx macros   Detlev Zundel
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Detlev Zundel
• [U-Boot] Debugging, Why USB is not stable   Detlev Zundel
• [U-Boot] u-boot   Detlev Zundel
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Reinhard Meyer
• [U-Boot] [RFC][PATCH] mkimage: Add compatibility option for legacy Multi-File images   Detlev Zundel
• [U-Boot] [PATCH V4 1/4] suen3: remove CONFIG_HARD_I2C and related defines   Prafulla Wadaskar
• [U-Boot] android fastboot support on U-boot   Detlev Zundel
• [U-Boot] Debugging, Why USB is not stable   Bas Mevissen
• [U-Boot] [PATCH V4 1/4] suen3: remove CONFIG_HARD_I2C and related defines   Heiko Schocher
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Reinhard Meyer
• [U-Boot] [PATCH V4 1/4] suen3: remove CONFIG_HARD_I2C and related defines   Prafulla Wadaskar
• [U-Boot] [PATCH V4 2/4] i2c: rename kirkwood_i2c to mvtwsi   Prafulla Wadaskar
• [U-Boot] [PATCH V4 3/4] i2c: rewrite mvtwsi, support orion5x and kirkwood   Prafulla Wadaskar
• [U-Boot] [PATCH V4 4/4] edminiv2: add I2C support using mvtwsi driver   Prafulla Wadaskar
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Detlev Zundel
• [U-Boot] Debugging, Why USB is not stable   Detlev Zundel
• [U-Boot] [PATCH 0/2] fix little endian build   Xiangfu Liu
• [U-Boot] android fastboot support on U-boot   Bas Mevissen
• [U-Boot] [PATCH] fix the c_size, in CSD Version 2.0, it's 22 bits   Xiangfu Liu
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Detlev Zundel
• [U-Boot] android fastboot support on U-boot   Detlev Zundel
• [U-Boot] Debugging, Why USB is not stable   Bas Mevissen
• [U-Boot] Debugging, Why USB is not stable   Detlev Zundel
• [U-Boot] android fastboot support on U-boot   Bas Mevissen
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Stefano Babic
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Albert ARIBAUD
• [U-Boot] [PATCH V4 1/4] suen3: remove CONFIG_HARD_I2C and related defines   Albert ARIBAUD
• [U-Boot] TQM834x CFI flash question: Support for 1 or 2 flash banks?   Stefan Roese
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Reinhard Meyer
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Detlev Zundel
• [U-Boot] [PATCH] fix the c_size, in CSD Version 2.0, it's 22 bits   Reinhard Meyer
• [U-Boot] android fastboot support on U-boot   Detlev Zundel
• [U-Boot] android fastboot support on U-boot   Bas Mevissen
• [U-Boot] [PATCH] fix the c_size, in CSD Version 2.0, it's 22 bits   Xiangfu Liu
• [U-Boot] [PATCH 0/2] fix little endian build   Shinya Kuribayashi
• [U-Boot] [PATCH] arm, orion5x: fix comilerwarning for edminiv2 board   Heiko Schocher
• [U-Boot] [PATCH V4 0/4] Improve I2C for orion5x, kirkwood and ED Mini V2   Heiko Schocher
• [U-Boot] [PATCH] arm, orion5x: fix comilerwarning for edminiv2 board   Prafulla Wadaskar
• [U-Boot] [PATCH] arm, orion5x: fix comilerwarning for edminiv2 board   Heiko Schocher
• [U-Boot] Pull request v3: u-boot-i2c   Heiko Schocher
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Reinhard Meyer
• [U-Boot] [PATCH 0/2] fix little endian build   Xiangfu Liu
• [U-Boot] android fastboot support on U-boot   John Rigby
• [U-Boot] [PATCH 0/2] fix little endian build   Shinya Kuribayashi
• [U-Boot] [PATCH] at91_emac.h: fix typo in register definition   Jens Scharsig
• [U-Boot] [ELDK] Not able to Uncompress Multi Image   Detlev Zundel
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Detlev Zundel
• [U-Boot] [PATCH 1/8] APM82xxx: Add CPU support   Tirumala Marri
• [U-Boot] [PATCH v5 0/5] mtdparts: add bad-block skipping   Ben Gardiner
• [U-Boot] [PATCH v5 1/5] mtdparts: regroup calls to get_mtd_device_nm   Ben Gardiner
• [U-Boot] [PATCH v5 2/5] mtd: add an mtd method for get_len_incl_bad()   Ben Gardiner
• [U-Boot] [PATCH v5 3/5] mtdparts: show net size in mtdparts list   Ben Gardiner
• [U-Boot] [PATCH v5 4/5] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] [PATCH v5 5/5] mtdparts: new add.spread: add part skipping bad blocks   Ben Gardiner
• [U-Boot] [PATCH 8/8] APM82xxx: Add top level common file changes   Tirumala Marri
• [U-Boot] [PATCH 5/8] APM82xxx: Add UIC support   Tirumala Marri
• [U-Boot] [PATCH 6/8] APM82xxx: Add SRAM support   Tirumala Marri
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Albert ARIBAUD
• [U-Boot] [RFC] Board support patches for the eXMeritus HWW-1U-1A devices   Kyle Moffett
• [U-Boot] [RFC][PATCH 1/3] DDR2: Support new JEDEC DDR2 SPD 1.3 spec   Kyle Moffett
• [U-Boot] [RFC][PATCH 2/3] e1000: Intel 82571EB: Don't wait for MNG cycle on unmanaged chips   Kyle Moffett
• [U-Boot] [RFC][PATCH 3/3] Add board support for the eXMeritus HWW-1U-1A devices   Kyle Moffett
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Reinhard Meyer
• [U-Boot] [PATCH 5/8] APM82xxx: Add UIC support   Tirumala Marri
• [U-Boot] [PATCH 7/8] APM82xxx: Add bluestone board support   Tirumala Marri
• [U-Boot] [PATCH 2/8] APM82xxx: Add Common register definitions   Tirumala Marri
• [U-Boot] [PATCH 4/8] APM82xxx: Add DDR support   Tirumala Marri
• [U-Boot] [PATCH 8/8] APM82xxx: Add top level common file changes   Tirumala Marri
• [U-Boot] "UnCorrectable RS-ECC Error" occurs when reading NAND flash under u-boot 2009.08 for i.mx25   Scott Wood
• [U-Boot] [PATCH 2/7] Expand POST memory test to support arch-depended implementation.   Scott Wood
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Scott Wood
• [U-Boot] [PATCH v4 3/4] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] [PATCH v5 3/5] mtdparts: show net size in mtdparts list   Scott Wood
• [U-Boot] [PATCH v5 2/5] mtd: add an mtd method for get_len_incl_bad()   Scott Wood
• [U-Boot] [PATCH v5 4/5] mtdparts: add new sub-command "spread"   Scott Wood
• [U-Boot] [PATCH v5 4/5] mtdparts: add new sub-command "spread"   Scott Wood
• [U-Boot] UEC/NET patch status?   Joakim Tjernlund
• [U-Boot] [PATCH] logos: add Freescale logo   Timur Tabi
• [U-Boot] UEC/NET patch status?   Ben Warren
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Detlev Zundel
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Detlev Zundel
• [U-Boot] [PATCH] video: cfb_console: fix definition and usage of CURSOR_xxx macros   Anatolij Gustschin
• [U-Boot] [PATCH 1/5] nand util: read/write: accept unaligned length   Scott Wood
• [U-Boot] [PATCH 2/5] cmd_nand: some infrastructure fixes and refactoring   Scott Wood
• [U-Boot] [PATCH 3/5] nand erase: .spread, .part, .chip subcommands   Scott Wood
• [U-Boot] [PATCH 4/5] nand commands: make only "dump" repeatable.   Scott Wood
• [U-Boot] [PATCH 5/5] nand: remove dead code and suspend/resume   Scott Wood
• [U-Boot] [PATCH] mpc831xerdb: enable mtdparts for NAND   Scott Wood
• [U-Boot] [PATCH] [U-BOOT] Zoom2 & Zoom3: introduced a macro to use a different buffer size when compiling for Zoom2 or Zoom3.   Aldo Cedillo
• [U-Boot] [PATCH 0/2] fix little endian build   Xiangfu Liu
• [U-Boot] [PATCH 0/2] fix little endian build   Shinya Kuribayashi
• [U-Boot] [PATCH 0/2] fix little endian build   Shinya Kuribayashi
• [U-Boot] [PATCH 7/8] APM82xxx: Add bluestone board support   Stefan Roese
• [U-Boot] [PATCH 0/2] fix little endian build   Xiangfu Liu
• [U-Boot] [PATCH 1/2] TI: netdev: add driver for cpsw ethernet device   Ben Warren
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Albert ARIBAUD
• [U-Boot] [PATCH v2] NET: move legacy enc28j60.c to sidetrack as enc28j60_lpc2292.c   Ben Warren
• [U-Boot] [PATCH 1/2] UEC: Don't udelay needlessly   Ben Warren
• [U-Boot] [PATCHv2] net: Fix faulty definition of uec_initialize()   Ben Warren
• [U-Boot] [PATCH] display_buffer: fix misaligned buffer   Reinhard Meyer
• [U-Boot] [RFC][PATCH] mkimage: Add compatibility option for legacy Multi-File images   Thibaut Girka
• [U-Boot] [PATCH V3] AT91 Fix: return value of get_tbclk   Reinhard Meyer
• [U-Boot] [PATCH v2] display_buffer: fix misaligned buffer   Reinhard Meyer
• [U-Boot] [PATCH] arm, orion5x: fix comilerwarning for edminiv2 board   Sergei Shtylyov
• [U-Boot] [PATCH] ppc4xx: Invalidate d-cache when used as init-ram   Stefan Roese
• [U-Boot] [PATCH] arm, orion5x: fix comilerwarning for edminiv2 board   Heiko Schocher
• [U-Boot] Please pull u-boot-samsung/master   Minkyu Kang
• [U-Boot] Hi   Vaishali Dhakate
• [U-Boot] [PATCH 0/4] cfi_flash: A bit of cleanup and code simplification   Stefan Roese
• [U-Boot] [PATCH 1/4] cfi_flash: Simplify flash_get_info()   Stefan Roese
• [U-Boot] [PATCH 2/4] cfi_flash: Add weak default for cfi_flash_bank_addr()   Stefan Roese
• [U-Boot] [PATCH 3/4] cfi_flash: Simplify dynamic flash bank number detection   Stefan Roese
• [U-Boot] [PATCH 4/4] cfi_flash: Remove uneccessary #ifdef CONFIG_SYS_MAX_FLASH_BANKS_DETECT   Stefan Roese
• [U-Boot] [PATCH] cp/cmp: Add WATCHDOG_RESET in copy and compare loop   Stefan Roese
• [U-Boot] [PATCH] cp/cmp: Add WATCHDOG_RESET in copy and compare loop   Mike Frysinger
• [U-Boot] [PATCH] cp/cmp: Add WATCHDOG_RESET in copy and compare loop   Stefan Roese
• [U-Boot] [PATCH v5 2/5] mtd: add an mtd method for get_len_incl_bad()   Ben Gardiner
• [U-Boot] [PATCH v5 3/5] mtdparts: show net size in mtdparts list   Ben Gardiner
• [U-Boot] [PATCH v5 4/5] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] [PATCH] fdt: call fdt_parent_offset fewer times while translating addresses   Kumar Gala
• [U-Boot] [PATCH v5 3/5] mtdparts: show net size in mtdparts list   Scott Wood
• [U-Boot] [PATCH 1/2] TI: netdev: add driver for cpsw ethernet device   Cyril Chemparathy
• [U-Boot] [PATCH V3] AT91 Fix: return value of get_tbclk   Jens Scharsig
• [U-Boot] [PATCH 1/7] fix dma for 36bit addressing   Kumar Gala
• [U-Boot] [PATCH 7/7] Fix parameters to support RDIMM for P2020DS   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx.git   Kumar Gala
• [U-Boot] [PATCH] zlib: Add further watchdog reset calls   Stefan Roese
• [U-Boot] Debugging, Why USB is not stable   Remy Bohmer
• [U-Boot] [PATCH] usb: fix usb start problem with SMSC USB hub and Toshiba USB stick   Anatolij Gustschin
• [U-Boot] [PATCH] [v2] mpc8610: refactor DIU initialization code to use existing bitmap and logo features   Timur Tabi
• [U-Boot] [PATCH] [v2] mpc8610: refactor DIU initialization code to use existing bitmap and logo features   Timur Tabi
• [U-Boot] [PATCH 1/5] nand util: read/write: accept unaligned length   Ben Gardiner
• [U-Boot] [PATCH 2/5] cmd_nand: some infrastructure fixes and refactoring   Ben Gardiner
• [U-Boot] [PATCH 3/5] nand erase: .spread, .part, .chip subcommands   Ben Gardiner
• [U-Boot] [PATCH 4/5] nand commands: make only "dump" repeatable.   Ben Gardiner
• [U-Boot] [PATCH 5/5] nand: remove dead code and suspend/resume   Ben Gardiner
• [U-Boot] [PATCH v6 0/5] mtdparts: add bad-block skipping   Ben Gardiner
• [U-Boot] [PATCH v6 1/5] mtdparts: regroup calls to get_mtd_device_nm   Ben Gardiner
• [U-Boot] [PATCH v6 2/5] mtd: add an mtd method for get_len_incl_bad()   Ben Gardiner
• [U-Boot] [PATCH v6 3/5] mtdparts: show net size in mtdparts list   Ben Gardiner
• [U-Boot] [PATCH v6 4/5] mtdparts: add new sub-command "spread"   Ben Gardiner
• [U-Boot] [PATCH v6 5/5] mtdparts: new add.spread: add part skipping bad blocks   Ben Gardiner

Last message date: Tue Aug 31 23:48:04 CEST 2010
Archived on: Tue Aug 31 23:56:04 CEST 2010

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...