[U-Boot] [PATCH] [U-BOOT] Zoom2: Ethernet: Enabling LAN9221 chip and CMD_NET.

Aldo Brett Cedillo Martinez aldo.cedillo at ti.com
Mon Aug 16 20:19:38 CEST 2010


Configures GPMC, adds macros to enable net commands, and adds proper
initialization to board_eth_init function.

I have a similar patch to enable ethernet in zoom3 after initial support
patch.

Signed-off-by: Aldo Brett Cedillo Martinez <aldo.cedillo at ti.com>
---
 board/logicpd/zoom2/zoom2.c   |   21 +++++++++++++++++++++
 include/configs/omap3_zoom2.h |   10 +++++++++-
 2 files changed, 30 insertions(+), 1 deletions(-)

diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
index e9f6625..54d3e9f 100644
--- a/board/logicpd/zoom2/zoom2.c
+++ b/board/logicpd/zoom2/zoom2.c
@@ -60,6 +60,16 @@ static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = {
 	0x1D0904C4, 0
 };
 
+/* Ethernet GPMC configuration */
+static u32 gpmc_eth[GPMC_MAX_REG] = {
+	NET_GPMC_CONFIG1,
+	NET_GPMC_CONFIG2,
+	NET_GPMC_CONFIG3,
+	NET_GPMC_CONFIG4,
+	NET_GPMC_CONFIG5,
+	NET_GPMC_CONFIG6, 0
+};
+
 /* Used to track the revision of the board */
 static zoom2_revision revision = ZOOM2_REVISION_UNKNOWN;
 
@@ -130,6 +140,12 @@ int board_init (void)
 	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3],
 			SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M);
 
+#ifdef CONFIG_CMD_NET
+	gpmc_config = gpmc_eth;
+	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[7],
+			CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
+#endif	/* (CONFIG_CMD_NET) */
+
 	/* board id for Linux */
 	gd->bd->bi_arch_number = MACH_TYPE_OMAP_ZOOM2;
 	/* boot param addr */
@@ -186,6 +202,11 @@ int board_eth_init(bd_t *bis)
 #ifdef CONFIG_LAN91C96
 	rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
 #endif
+
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+
 	return rc;
 }
 #endif
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index eef95fe..c66d571 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -154,7 +154,7 @@
 #undef CONFIG_CMD_FPGA			/* FPGA configuration Support	*/
 #undef CONFIG_CMD_IMI			/* iminfo			*/
 #undef CONFIG_CMD_IMLS			/* List all found images	*/
-#undef CONFIG_CMD_NET			/* bootp, tftpboot, rarpboot	*/
+#define CONFIG_CMD_NET			/* bootp, tftpboot, rarpboot	*/
 #undef CONFIG_CMD_NFS			/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
@@ -165,6 +165,14 @@
 #define CONFIG_SYS_I2C_BUS_SELECT	1
 #define CONFIG_DRIVER_OMAP34XX_I2C	1
 
+/* Ethernet */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE		0x2C000000
+#endif /* (CONFIG_CMD_NET) */
+
 /*
  * TWL4030
  */
-- 
1.6.3.3



More information about the U-Boot mailing list