[U-Boot] [PATCH 6/8] PXA: Voipac270 improvements

Marek Vasut marek.vasut at gmail.com
Fri Aug 20 11:31:29 CEST 2010


128MB NOR module support.
Define __io to get harddrive working.
Fix saving of environment into OneNAND.
Boot from harddrive when possible.
Add missing MAINTAINERS entry.

Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
---
Changes same as in PalmTC

 MAINTAINERS                   |    1 +
 MAKEALL                       |    3 +-
 Makefile                      |    7 ++-
 board/vpac270/Makefile        |    7 +--
 board/vpac270/lowlevel_init.S |    1 -
 board/vpac270/vpac270.c       |   41 ++++++----------
 include/configs/vpac270.h     |  106 +++++++++++++++++++++++-----------------
 7 files changed, 87 insertions(+), 79 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 5d20dca..c35a277 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -800,6 +800,7 @@ Marek Vasut <marek.vasut at gmail.com>
 
 	palmld		xscale
 	palmtc		xscale
+	vpac270		xscale
 
 Hugo Villeneuve <hugo.villeneuve at lyrtech.com>
 
diff --git a/MAKEALL b/MAKEALL
index 1642abe..52472de 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -719,7 +719,8 @@ LIST_pxa="		\
 	polaris		\
 	pxa255_idp	\
 	trizepsiv	\
-	vpac270_nor	\
+	vpac270_128M_nor\
+	vpac270_256M_nor\
 	vpac270_onenand	\
 	wepep250	\
 	xaeniax		\
diff --git a/Makefile b/Makefile
index 4f1cb1b..3f2b304 100644
--- a/Makefile
+++ b/Makefile
@@ -2180,13 +2180,18 @@ trizepsiv_config	:	unconfig
 	fi;
 	@$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv
 
-vpac270_nor_config \
+vpac270_nor_256M_config \
+vpac270_nor_128M_config \
 vpac270_onenand_config	: unconfig
 	@mkdir -p $(obj)include
 	@if [ "$(findstring onenand,$@)" ] ; then \
 		echo "#define CONFIG_ONENAND_U_BOOT" \
 			>>$(obj)include/config.h ; \
 	fi;
+	@if [ "$(findstring 256M,$@)" ] ; then \
+		echo "#define CONFIG_256M_U_BOOT" \
+			>>$(obj)include/config.h ; \
+	fi;
 	@$(MKCONFIG) -n $@ -a vpac270 arm pxa vpac270
 
 #########################################################################
diff --git a/board/vpac270/Makefile b/board/vpac270/Makefile
index c6f4c7c..f5014fc 100644
--- a/board/vpac270/Makefile
+++ b/board/vpac270/Makefile
@@ -1,10 +1,7 @@
-
 #
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+# Voipac PXA270 Support
 #
-# See file CREDITS for list of people who contributed to this
-# project.
+# Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
diff --git a/board/vpac270/lowlevel_init.S b/board/vpac270/lowlevel_init.S
index ec0d12c..c40d12f 100644
--- a/board/vpac270/lowlevel_init.S
+++ b/board/vpac270/lowlevel_init.S
@@ -3,7 +3,6 @@
  *
  * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
  *
- *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c
index 18e47e2..2d01e22 100644
--- a/board/vpac270/vpac270.c
+++ b/board/vpac270/vpac270.c
@@ -1,16 +1,7 @@
 /*
- * (C) Copyright 2004
- * Robert Whaley, Applied Data Systems, Inc. rwhaley at applieddata.net
+ * Voipac PXA270 Support
  *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris at nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
+ * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -31,29 +22,19 @@
 #include <common.h>
 #include <asm/arch/hardware.h>
 #include <netdev.h>
+#include <serial.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* ------------------------------------------------------------------------- */
-
 /*
  * Miscelaneous platform dependent initialisations
  */
-extern struct serial_device serial_ffuart_device;
-extern struct serial_device serial_btuart_device;
-extern struct serial_device serial_stuart_device;
-
-struct serial_device *default_serial_console (void)
-{
-	return &serial_ffuart_device;
-}
-
 int board_init (void)
 {
 	/* memory and cpu-speed are setup before relocation */
 	/* so we do _nothing_ here */
 
-	/* arch number of vpac270 */
+	/* Arch number of vpac270 */
 	gd->bd->bi_arch_number = MACH_TYPE_VPAC270;
 
 	/* adress of boot parameters */
@@ -62,17 +43,24 @@ int board_init (void)
 	return 0;
 }
 
+struct serial_device *default_serial_console (void)
+{
+	return &serial_ffuart_device;
+}
+
 int dram_init (void)
 {
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
-
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
 
+#ifdef	CONFIG_256M_U_BOOT
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+#endif
 	return 0;
 }
 
+#ifdef	CONFIG_CMD_USB
 int usb_board_init(void)
 {
 	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
@@ -119,6 +107,7 @@ void usb_board_stop(void)
 
 	return;
 }
+#endif
 
 #ifdef CONFIG_DRIVER_DM9000
 int board_eth_init(bd_t *bis)
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index d3e22d9..694a8f9 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -10,7 +10,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -19,8 +19,8 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef	__CONFIG_H
+#define	__CONFIG_H
 
 /*
  * High Level Board Configuration Options
@@ -28,20 +28,13 @@
 #define	CONFIG_PXA27X		1	/* Marvell PXA270 CPU */
 #define	CONFIG_VPAC270		1	/* Voipac PXA270 board */
 
-#undef	BOARD_LATE_INIT
-#undef	CONFIG_SKIP_RELOCATE_UBOOT
-#undef	CONFIG_USE_IRQ
-#undef	CONFIG_SKIP_LOWLEVEL_INIT
-
 /*
  * Environment settings
  */
-#define	CONFIG_ENV_SIZE			0x4000
-#define	CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+#define	CONFIG_ENV_OVERWRITE
+#define	CONFIG_SYS_MALLOC_LEN		(128*1024)
 #define	CONFIG_SYS_GBL_DATA_SIZE	128
 
-#define	CONFIG_ENV_OVERWRITE		/* override default environment */
-
 #define	CONFIG_BOOTCOMMAND						\
 	"if mmc init && fatload mmc 0 0xa4000000 uImage; then "		\
 		"bootm 0xa4000000; "					\
@@ -49,6 +42,9 @@
 	"if usb reset && fatload usb 0 0xa4000000 uImage; then "	\
 		"bootm 0xa4000000; "					\
 	"fi; "								\
+	"if ide reset && fatload ide 0 0xa4000000 uImage; then "	\
+		"bootm 0xa4000000; "					\
+	"fi; "								\
 	"bootm 0x40000;"
 #define	CONFIG_BOOTARGS			"console=tty0 console=ttyS0,115200"
 #define	CONFIG_TIMESTAMP
@@ -97,9 +93,9 @@
 
 #define	CONFIG_NET_MULTI		1
 #define	CONFIG_DRIVER_DM9000		1
-#define CONFIG_DM9000_BASE		0x08000300	/* CS2 */
-#define DM9000_IO			(CONFIG_DM9000_BASE)
-#define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
+#define	CONFIG_DM9000_BASE		0x08000300	/* CS2 */
+#define	DM9000_IO			(CONFIG_DM9000_BASE)
+#define	DM9000_DATA			(CONFIG_DM9000_BASE + 4)
 #define	CONFIG_NET_RETRY_COUNT		10
 
 #define	CONFIG_BOOTP_BOOTFILESIZE
@@ -116,6 +112,7 @@
 #define	CONFIG_PXA_MMC
 #define	CONFIG_SYS_MMC_BASE		0xF0000000
 #define	CONFIG_CMD_FAT
+#define	CONFIG_CMD_EXT2
 #define	CONFIG_DOS_PARTITION
 #endif
 
@@ -123,8 +120,8 @@
  * KGDB
  */
 #ifdef	CONFIG_CMD_KGDB
-#define	CONFIG_KGDB_BAUDRATE		230400		/* speed to run kgdb serial port */
-#define	CONFIG_KGDB_SER_INDEX		2		/* which serial port to use */
+#define	CONFIG_KGDB_BAUDRATE		230400	/* kgdb serial port speed */
+#define	CONFIG_KGDB_SER_INDEX		2	/* which serial port to use */
 #endif
 
 /*
@@ -133,16 +130,17 @@
 #define	CONFIG_SYS_HUSH_PARSER		1
 #define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory	*/
+#define	CONFIG_SYS_LONGHELP
 #ifdef	CONFIG_SYS_HUSH_PARSER
-#define	CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
+#define	CONFIG_SYS_PROMPT		"$ "
 #else
-#define	CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
+#define	CONFIG_SYS_PROMPT		"=> "
 #endif
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define	CONFIG_SYS_CBSIZE		256
+#define	CONFIG_SYS_PBSIZE		\
+	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define	CONFIG_SYS_MAXARGS		16
+#define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define	CONFIG_SYS_DEVICE_NULLDEV	1
 
 /*
@@ -150,12 +148,10 @@
  */
 #undef	CONFIG_SYS_CLKS_IN_HZ
 #define	CONFIG_SYS_HZ			3250000		/* Timer @ 3250000 Hz */
-#define CONFIG_SYS_CPUSPEED		0x190		/* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
+#define	CONFIG_SYS_CPUSPEED		0x190		/* 312MHz */
 
 /*
  * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
  */
 #define	CONFIG_STACKSIZE		(128*1024)	/* regular stack */
 #ifdef	CONFIG_USE_IRQ
@@ -166,17 +162,24 @@
 /*
  * DRAM Map
  */
-#define	CONFIG_NR_DRAM_BANKS		2		/* We have 2 banks of DRAM */
+#define	CONFIG_NR_DRAM_BANKS		2		/* 2 banks of DRAM */
 #define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
 #define	PHYS_SDRAM_1_SIZE		0x08000000	/* 128 MB */
+
+#ifdef	CONFIG_256M_U_BOOT
 #define	PHYS_SDRAM_2			0x80000000	/* SDRAM Bank #2 */
 #define	PHYS_SDRAM_2_SIZE		0x08000000	/* 128 MB */
+#endif
 
 #define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
+#ifdef	CONFIG_256M_U_BOOT
 #define	CONFIG_SYS_DRAM_SIZE		0x10000000	/* 256 MB DRAM */
+#else
+#define	CONFIG_SYS_DRAM_SIZE		0x08000000	/* 128 MB DRAM */
+#endif
 
-#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
+#define	CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
+#define	CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
 
 #define	CONFIG_SYS_LOAD_ADDR		(0x5c000000)
 
@@ -185,14 +188,22 @@
  */
 #if	defined(CONFIG_CMD_FLASH)	/* NOR */
 #define	PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
+
+#ifdef	CONFIG_256M_U_BOOT
 #define	PHYS_FLASH_2			0x02000000	/* Flash Bank #2 */
+#endif
 
 #define	CONFIG_SYS_FLASH_CFI
 #define	CONFIG_FLASH_CFI_DRIVER		1
 
 #define	CONFIG_SYS_MAX_FLASH_SECT	(4 + 255)
+#ifdef	CONFIG_256M_U_BOOT
 #define	CONFIG_SYS_MAX_FLASH_BANKS	2
 #define	CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, PHYS_FLASH_2 }
+#else
+#define	CONFIG_SYS_MAX_FLASH_BANKS	1
+#define	CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#endif
 
 #define	CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ)
 #define	CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ)
@@ -200,25 +211,26 @@
 #define	CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
 #define	CONFIG_SYS_FLASH_PROTECTION		1
 
-#define CONFIG_ENV_IS_IN_FLASH		1
+#define	CONFIG_ENV_IS_IN_FLASH		1
+#define	CONFIG_ENV_SECT_SIZE		0x4000
 
 #elif	defined(CONFIG_CMD_ONENAND)	/* OneNAND */
 #define	CONFIG_SYS_NO_FLASH
 #define	CONFIG_SYS_ONENAND_BASE		0x00000000
+
 #define	CONFIG_ENV_IS_IN_ONENAND	1
+#define	CONFIG_ENV_SECT_SIZE		0x20000
 
 #else	/* No flash */
 #define	CONFIG_SYS_NO_FLASH
 #define	CONFIG_SYS_ENV_IS_NOWHERE
 #endif
 
-#define	CONFIG_SYS_MONITOR_BASE		0x000000
+#define	CONFIG_SYS_MONITOR_BASE		0x0
 #define	CONFIG_SYS_MONITOR_LEN		0x40000
 
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SECT_SIZE	0x40000
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#define	CONFIG_ENV_ADDR			0x40000
+#define	CONFIG_ENV_SIZE			0x4000
 
 /*
  * IDE
@@ -230,15 +242,15 @@
 
 #define	__io
 
-#define CONFIG_SYS_IDE_MAXBUS		1
-#define CONFIG_SYS_IDE_MAXDEVICE	1
+#define	CONFIG_SYS_IDE_MAXBUS		1
+#define	CONFIG_SYS_IDE_MAXDEVICE	1
 
-#define CONFIG_SYS_ATA_BASE_ADDR	0x0c000000
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0
+#define	CONFIG_SYS_ATA_BASE_ADDR	0x0c000000
+#define	CONFIG_SYS_ATA_IDE0_OFFSET	0x0
 
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x120
-#define CONFIG_SYS_ATA_REG_OFFSET	0x120
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x120
+#define	CONFIG_SYS_ATA_DATA_OFFSET	0x120
+#define	CONFIG_SYS_ATA_REG_OFFSET	0x120
+#define	CONFIG_SYS_ATA_ALT_OFFSET	0x120
 
 #define	CONFIG_SYS_ATA_STRIDE		2
 #endif
@@ -284,7 +296,11 @@
 #define	CONFIG_SYS_MSC0_VAL	0x3ffc95fa
 #define	CONFIG_SYS_MSC1_VAL	0x02ccf974
 #define	CONFIG_SYS_MSC2_VAL	0x00000000
+#ifdef	CONFIG_256M_U_BOOT
 #define	CONFIG_SYS_MDCNFG_VAL	0x8ad30ad3
+#else
+#define	CONFIG_SYS_MDCNFG_VAL	0x88000ad3
+#endif
 #define	CONFIG_SYS_MDREFR_VAL	0x201fe01e
 #define	CONFIG_SYS_MDMRS_VAL	0x00000000
 #define	CONFIG_SYS_FLYCNFG_VAL	0x00000000
@@ -306,13 +322,13 @@
  * LCD
  */
 #ifdef	CONFIG_LCD
-#define CONFIG_VOIPAC_LCD
+#define	CONFIG_VOIPAC_LCD
 #endif
 
 /*
  * USB
  */
-#ifdef CONFIG_CMD_USB
+#ifdef	CONFIG_CMD_USB
 #define	CONFIG_USB_OHCI_NEW
 #define	CONFIG_SYS_USB_OHCI_CPU_INIT
 #define	CONFIG_SYS_USB_OHCI_BOARD_INIT
-- 
1.7.1



More information about the U-Boot mailing list