[U-Boot] [PATCH V6 3/3] arm: Add support for jadecpu board based on MB86R01 SoC
Wolfgang Denk
wd at denx.de
Tue Aug 10 23:16:21 CEST 2010
Dear Matthias Weisser,
In message <1281353511-23719-4-git-send-email-weisserm at arcor.de> you wrote:
> This patch adds support for the jadecpu board using the
> MB86R01 'Jade' SoC from Fujitsu.
>
> Signed-off-by: Matthias Weisser <weisserm at arcor.de>
> ---
> MAINTAINERS | 4 +
> MAKEALL | 1 +
> board/syteco/jadecpu/Makefile | 55 +++++++
> board/syteco/jadecpu/config.mk | 1 +
> board/syteco/jadecpu/jadecpu.c | 170 ++++++++++++++++++++
> board/syteco/jadecpu/lowlevel_init.S | 265 +++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> include/configs/jadecpu.h | 291 ++++++++++++++++++++++++++++++++++
> tools/Makefile | 3 +
> tools/logos/syteco.bmp | Bin 0 -> 11414 bytes
> 10 files changed, 791 insertions(+), 0 deletions(-)
> create mode 100644 board/syteco/jadecpu/Makefile
> create mode 100644 board/syteco/jadecpu/config.mk
> create mode 100644 board/syteco/jadecpu/jadecpu.c
> create mode 100644 board/syteco/jadecpu/lowlevel_init.S
> create mode 100644 include/configs/jadecpu.h
> create mode 100644 tools/logos/syteco.bmp
Applied to u-boot-arm #master. Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It [being a Vulcan] means to adopt a philosophy, a way of life which
is logical and beneficial. We cannot disregard that philosophy merely
for personal gain, no matter how important that gain might be.
-- Spock, "Journey to Babel", stardate 3842.4
More information about the U-Boot
mailing list