[U-Boot] [PATCHv2 CFI flash]: Workaround for Numonyx Axcell P33/P30 256-Mbit 65nm bug

[Stefan Roese]

Hi Philippe,

first sorry for the late review (thanks Wolfgang for reminding).

On Saturday 07 August 2010 01:11:02 Wolfgang Denk wrote:
> Dear Stefan,
> 
> In message <20100623131040.GA23209 at frolo.macqel> Philippe De Muyter wrote:
> > Hello Wolfgang & list,
> > 
> > This is a revised patch, with comments and indentation fixed, I hope.
> > 

Minor note: Such commentary lines should be moved below the "---" line
below. They shouldn't appear in the git history.

<snip>

> diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
> index 3267c5d..4bf0807 100644
> --- a/drivers/mtd/cfi_flash.c
> +++ b/drivers/mtd/cfi_flash.c
> @@ -1347,17 +1347,34 @@ int flash_real_protect (flash_info_t * info, long
> sector, int prot)
> 
>         switch (info->vendor) {
>         
>                 case CFI_CMDSET_INTEL_PROG_REGIONS:
> 
>                 case CFI_CMDSET_INTEL_STANDARD:
> -               case CFI_CMDSET_INTEL_EXTENDED:
> -                       flash_write_cmd (info, sector, 0,
> -                                        FLASH_CMD_CLEAR_STATUS);
> -                       flash_write_cmd (info, sector, 0, FLASH_CMD_PROTECT);
> +               case CFI_CMDSET_INTEL_EXTENDED: {
> +                       unsigned short cmd;
> +
> 
>                         if (prot)
> 
> -                               flash_write_cmd (info, sector, 0,
> -                                       FLASH_CMD_PROTECT_SET);
> +                               cmd = FLASH_CMD_PROTECT_SET;
> 
>                         else
> 
> +                               cmd = FLASH_CMD_PROTECT_CLEAR;

Please move this variable declaration of "cmd" and assignment further down
(see below). You can remove the "{" "}" of this block then.

> +                       /*
> +                        * see errata called
> +                        * "Numonyx Axcell P33/P30 Specification Update" :)
> +                        */
> +                       flash_write_cmd (info, sector, 0, FLASH_CMD_READ_ID);
> +                       if (!flash_isequal (info, sector, FLASH_OFFSET_PROTECT,
> +                                           prot)) {
> +                               int flag = disable_interrupts ();

Declare and assign "cmd" here please.

Please change and resubmit. Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de