[U-Boot] [PATCH V4 1/4] suen3: remove CONFIG_HARD_I2C and related defines

[Prafulla Wadaskar]

> -----Original Message-----
> From: Heiko Schocher [mailto:hs at denx.de] 
> Sent: Monday, August 30, 2010 3:08 PM
> To: Prafulla Wadaskar
> Cc: Albert Aribaud; u-boot at lists.denx.de; Ashish Karkare; 
> Prabhanjan Sarnaik
> Subject: Re: [U-Boot] [PATCH V4 1/4] suen3: remove 
> CONFIG_HARD_I2C and related defines
> 
> Hello Prafulla,
> 
> Prafulla Wadaskar wrote:
> >> -----Original Message-----
> >> From: u-boot-bounces at lists.denx.de 
> >> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Albert Aribaud
> >> Sent: Friday, August 27, 2010 9:56 PM
> >> To: u-boot at lists.denx.de
> >> Subject: [U-Boot] [PATCH V4 1/4] suen3: remove 
> >> CONFIG_HARD_I2C and related defines
> >>
> >> These are not used on this board, which uses soft I2C instead.
> >>
> >> Signed-off-by: Albert Aribaud <albert.aribaud at free.fr>
> >> ---
> >>  include/configs/km_arm.h |    8 --------
> >>  1 files changed, 0 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
> >> index 6519c90..1617e69 100644
> >> --- a/include/configs/km_arm.h
> >> +++ b/include/configs/km_arm.h
> >> @@ -142,16 +142,8 @@
> >>  /*
> >>   * I2C related stuff
> >>   */
> >> -#undef	CONFIG_HARD_I2C		/* I2C with hardware support */
> >>  #define	CONFIG_SOFT_I2C		/* I2C bit-banged	*/
> >>  
> >> -#if defined(CONFIG_HARD_I2C)
> >> -#define	CONFIG_I2C_KIRKWOOD
> >> -#define	CONFIG_I2C_KW_REG_BASE		KW_TWSI_BASE
> >> -#define	CONFIG_SYS_I2C_SLAVE		0x0
> >> -#define	CONFIG_SYS_I2C_SPEED		100000
> >> -#endif
> >> -
> >>  #define	CONFIG_KIRKWOOD_GPIO		/* Enable GPIO 
> >> Support */
> >>  #if defined(CONFIG_SOFT_I2C)
> >>  #ifndef __ASSEMBLY__
> > 
> > Hi Heiko
> > There are no issues to apply this patch.
> > I hope this is okay with you?
> > Pls ack.
> 
> Acked-by: Heiko Schocher<hs at denx.de>
> 
> If you ack the patchset, I can add it to u-boot-i2c.git

Acked-by: Prafulla Wadaskar <prafulla at marvell.com>

Regards..
Prafulla . .

> 
> bye,
> Heiko
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>