[U-Boot] [PATCH V4 1/4] suen3: remove CONFIG_HARD_I2C and related defines

[Heiko Schocher]

Hello Prafulla,

Prafulla Wadaskar wrote:
>> -----Original Message-----
>> From: u-boot-bounces at lists.denx.de 
>> [mailto:u-boot-bounces at lists.denx.de] On Behalf Of Albert Aribaud
>> Sent: Friday, August 27, 2010 9:56 PM
>> To: u-boot at lists.denx.de
>> Subject: [U-Boot] [PATCH V4 1/4] suen3: remove 
>> CONFIG_HARD_I2C and related defines
>>
>> These are not used on this board, which uses soft I2C instead.
>>
>> Signed-off-by: Albert Aribaud <albert.aribaud at free.fr>
>> ---
>>  include/configs/km_arm.h |    8 --------
>>  1 files changed, 0 insertions(+), 8 deletions(-)
>>
>> diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
>> index 6519c90..1617e69 100644
>> --- a/include/configs/km_arm.h
>> +++ b/include/configs/km_arm.h
>> @@ -142,16 +142,8 @@
>>  /*
>>   * I2C related stuff
>>   */
>> -#undef	CONFIG_HARD_I2C		/* I2C with hardware support */
>>  #define	CONFIG_SOFT_I2C		/* I2C bit-banged	*/
>>  
>> -#if defined(CONFIG_HARD_I2C)
>> -#define	CONFIG_I2C_KIRKWOOD
>> -#define	CONFIG_I2C_KW_REG_BASE		KW_TWSI_BASE
>> -#define	CONFIG_SYS_I2C_SLAVE		0x0
>> -#define	CONFIG_SYS_I2C_SPEED		100000
>> -#endif
>> -
>>  #define	CONFIG_KIRKWOOD_GPIO		/* Enable GPIO 
>> Support */
>>  #if defined(CONFIG_SOFT_I2C)
>>  #ifndef __ASSEMBLY__
> 
> Hi Heiko
> There are no issues to apply this patch.
> I hope this is okay with you?
> Pls ack.

Acked-by: Heiko Schocher<hs at denx.de>

If you ack the patchset, I can add it to u-boot-i2c.git

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany