[U-Boot] [PATCH 02/7] ARMV7: OMAP: add convenience function to set TWL4030 regulator voltages

[Steve Sakoman]

This patch adds a function to allow one to easily set the target
voltage for the TWL4030 regulators.  It also modifies the existing
code to use this new function.  Applicable definitions are moved
out of the driver file and into the header file so that they are
generally accessible

Signed-off-by: Steve Sakoman <steve at sakoman.com>
---
 drivers/power/twl4030.c |   69 ++++++++++++++++++++--------------------------
 include/twl4030.h       |   14 +++++++++
 2 files changed, 44 insertions(+), 39 deletions(-)

diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
index eb066cb..1a54089 100644
--- a/drivers/power/twl4030.c
+++ b/drivers/power/twl4030.c
@@ -59,57 +59,48 @@ void twl4030_power_reset_init(void)
 	}
 }
 
-
 /*
- * Power Init
+ * Set Device Group and Voltage
  */
-#define DEV_GRP_P1		0x20
-#define VAUX3_VSEL_28		0x03
-#define DEV_GRP_ALL		0xE0
-#define VPLL2_VSEL_18		0x05
-#define VDAC_VSEL_18		0x03
+void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
+				u8 dev_grp, u8 dev_grp_sel)
+{
+	/* Select the Device Group */
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel,
+				dev_grp);
+
+	/* Select the Voltage */
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val,
+				vsel_reg);
+}
 
 void twl4030_power_init(void)
 {
-	unsigned char byte;
-
 	/* set VAUX3 to 2.8V */
-	byte = DEV_GRP_P1;
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
-			     TWL4030_PM_RECEIVER_VAUX3_DEV_GRP);
-	byte = VAUX3_VSEL_28;
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
-			     TWL4030_PM_RECEIVER_VAUX3_DEDICATED);
+	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED,
+				TWL4030_PM_RECEIVER_VAUX3_VSEL_28,
+				TWL4030_PM_RECEIVER_VAUX3_DEV_GRP,
+				TWL4030_PM_RECEIVER_DEV_GRP_P1);
 
 	/* set VPLL2 to 1.8V */
-	byte = DEV_GRP_ALL;
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
-			     TWL4030_PM_RECEIVER_VPLL2_DEV_GRP);
-	byte = VPLL2_VSEL_18;
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
-			     TWL4030_PM_RECEIVER_VPLL2_DEDICATED);
+	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED,
+				TWL4030_PM_RECEIVER_VPLL2_VSEL_18,
+				TWL4030_PM_RECEIVER_VPLL2_DEV_GRP,
+				TWL4030_PM_RECEIVER_DEV_GRP_ALL);
 
 	/* set VDAC to 1.8V */
-	byte = DEV_GRP_P1;
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
-			     TWL4030_PM_RECEIVER_VDAC_DEV_GRP);
-	byte = VDAC_VSEL_18;
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
-			     TWL4030_PM_RECEIVER_VDAC_DEDICATED);
+	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED,
+				TWL4030_PM_RECEIVER_VDAC_VSEL_18,
+				TWL4030_PM_RECEIVER_VDAC_DEV_GRP,
+				TWL4030_PM_RECEIVER_DEV_GRP_P1);
 }
 
-#define VMMC1_VSEL_30		0x02
-
 void twl4030_power_mmc_init(void)
 {
-	unsigned char byte;
-
-	byte = DEV_GRP_P1;
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
-			     TWL4030_PM_RECEIVER_VMMC1_DEV_GRP);
-
-	/* 3 Volts */
-	byte = VMMC1_VSEL_30;
-	twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
-			     TWL4030_PM_RECEIVER_VMMC1_DEDICATED);
+	/* Set VMMC1 to 3 Volts */
+	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
+				TWL4030_PM_RECEIVER_VMMC1_VSEL_30,
+				TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
+				TWL4030_PM_RECEIVER_DEV_GRP_P1);
 }
+
diff --git a/include/twl4030.h b/include/twl4030.h
index 2b2f5ae..930c285 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -304,6 +304,17 @@
 #define TWL4030_PM_RECEIVER_MAINREF_TYPE		0xF0
 #define TWL4030_PM_RECEIVER_MAINREF_REMAP		0xF1
 
+/* Voltage Selection in PM Receiver Module */
+#define TWL4030_PM_RECEIVER_VAUX2_VSEL_18		0x05
+#define TWL4030_PM_RECEIVER_VAUX3_VSEL_28		0x03
+#define TWL4030_PM_RECEIVER_VPLL2_VSEL_18		0x05
+#define TWL4030_PM_RECEIVER_VDAC_VSEL_18		0x03
+#define TWL4030_PM_RECEIVER_VMMC1_VSEL_30		0x02
+
+/* Device Selection in PM Receiver Module */
+#define TWL4030_PM_RECEIVER_DEV_GRP_P1			0x20
+#define TWL4030_PM_RECEIVER_DEV_GRP_ALL			0xE0
+
 /* LED */
 #define TWL4030_LED_LEDEN				0xEE
 #define TWL4030_LED_LEDEN_LEDAON			(1 << 0)
@@ -500,6 +511,9 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
 
 /* For hardware resetting */
 void twl4030_power_reset_init(void);
+/* For setting device group and voltage */
+void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
+			     u8 dev_grp, u8 dev_grp_sel);
 /* For initializing power device */
 void twl4030_power_init(void);
 /* For initializing mmc power */
-- 
1.7.0.4