[U-Boot] [u-Boot] USB EHCI for mpc512x crashes Uboot
Einar Már Björgvinsson
Einar.Bjorgvinsson at marel.com
Mon Aug 16 18:00:31 CEST 2010
Hi
I'm new to this list so I hope that this is the right place for my question.
I have a board with mpc5121e cpu on it and I'm been patching my Uboot (U-Boot v2009.11) with the patch given initially by Francesco Rendine:
http://lists.denx.de/pipermail/u-boot/2009-June/055022.html
It seems like that every time I run 'usb start' from the Uboot prompt it crashes the Uboot like:
------------
Hit any key to stop autoboot: 0
=> usb start
(Re)start USB...
USB:
U-Boot 2009.11.1-svn813 (Aug 16 2010 - 15:07:33) MPC512X
CPU: MPC5121e rev. 3.0, Core e300c4 at 396 MHz, CSB at 198 MHz
Board: V39 Revision B
I2C: ready
.
.
.
-------------------
After some debugging it seems to be in the ehci_hcd_init():
- hcor = (struct ehci_hcor *)((uint32_t) hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
this line makes it crash.
Regards
Einar
More information about the U-Boot
mailing list