[U-Boot] [PATCH] MX51: Added pins definition to set up pads
Stefano Babic
sbabic at denx.de
Fri Aug 20 12:56:33 CEST 2010
Add pins definitions to set up RAM pads. Pins have only
a pad, there is no entry in the multiplexer.
Signed-off-by: Stefano Babic <sbabic at denx.de>
---
arch/arm/include/asm/arch-mx51/mx51_pins.h | 44 ++++++++++++++++++++++++++++
1 files changed, 44 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/arch-mx51/mx51_pins.h b/arch/arm/include/asm/arch-mx51/mx51_pins.h
index ca26f41..b44ff25 100644
--- a/arch/arm/include/asm/arch-mx51/mx51_pins.h
+++ b/arch/arm/include/asm/arch-mx51/mx51_pins.h
@@ -368,6 +368,50 @@ enum iomux_pins {
MX51_PIN_GPIO1_7 = _MXC_BUILD_GPIO_PIN(0, 7, 0, 0x3E4, 0x810),
MX51_PIN_GPIO1_8 = _MXC_BUILD_GPIO_PIN(0, 8, 0, 0x3E8, 0x814),
MX51_PIN_GPIO1_9 = _MXC_BUILD_GPIO_PIN(0, 9, 0, 0x3EC, 0x818),
+
+ /* The following are PADS used for drive strength */
+
+ MX51_PIN_CTL_GRP_DDRPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x820),
+ MX51_PIN_CTL_GRP_PKEDDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x838),
+ MX51_PIN_CTL_GRP_PKEADDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x890),
+ MX51_PIN_CTL_GRP_DDRAPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x87C),
+ MX51_PIN_CTL_GRP_DDRAPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x84C),
+ MX51_PIN_CTL_GRP_DDRPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x884),
+ MX51_PIN_CTL_GRP_HYSDDR0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x85C),
+ MX51_PIN_CTL_GRP_HYSDDR1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x864),
+ MX51_PIN_CTL_GRP_HYSDDR2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x86C),
+ MX51_PIN_CTL_GRP_HYSDDR3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x874),
+ MX51_PIN_CTL_GRP_DDR_SR_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x878),
+ MX51_PIN_CTL_GRP_DDR_SR_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x880),
+ MX51_PIN_CTL_GRP_DDR_SR_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x88C),
+ MX51_PIN_CTL_GRP_DDR_SR_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x89C),
+ MX51_PIN_CTL_GRP_DRAM_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A4),
+ MX51_PIN_CTL_GRP_DRAM_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8AC),
+ MX51_PIN_CTL_GRP_DRAM_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B8),
+ MX51_PIN_CTL_GRP_DRAM_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x82C),
+ MX51_PIN_CTL_GRP_INMODE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A0),
+ MX51_PIN_CTL_GRP_DDR_SR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B0),
+ MX51_PIN_CTL_GRP_EMI_DS5 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B4),
+ MX51_PIN_CTL_GRP_DDR_SR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8BC),
+ MX51_PIN_CTL_GRP_DDR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x83C),
+ MX51_PIN_CTL_GRP_DDR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x848),
+ MX51_PIN_CTL_GRP_DISP_PKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x868),
+ MX51_PIN_CTL_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A4),
+ MX51_PIN_CTL_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A8),
+ MX51_PIN_CTL_DRAM_SDWE = _MXC_BUILD_NON_GPIO_PIN(0, 0x4Ac),
+ MX51_PIN_CTL_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B0),
+ MX51_PIN_CTL_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B4),
+ MX51_PIN_CTL_DRAM_SDCLK = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B8),
+ MX51_PIN_CTL_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4BC),
+ MX51_PIN_CTL_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C0),
+ MX51_PIN_CTL_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C4),
+ MX51_PIN_CTL_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C8),
+ MX51_PIN_CTL_DRAM_CS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4CC),
+ MX51_PIN_CTL_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D0),
+ MX51_PIN_CTL_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D4),
+ MX51_PIN_CTL_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D8),
+ MX51_PIN_CTL_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4DC),
+ MX51_PIN_CTL_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4E0),
};
#endif /* __ASSEMBLY__ */
--
1.6.3.3
More information about the U-Boot
mailing list