[U-Boot] [PATCH 0/3] Integrate new USB gadget layer and USB CDC-ECM driver layer

[Remy Bohmer]

Hi,

Here is a series of 3 patches that add support for USB-CDC-ECM to U-boot.
With this series it will become possible to use U-boot as an Ethernet
gadget device. It can, for example, be used to download via TFTP files
from a TFTP via USB-ethernet, while U-boot functions as a USB-device.
It does not support using USB-device as serial console (yet), so it
does not (yet) replace the existing USB UDC layer.

It consist of 3 patches:
* 1/3 Add USB gadget layer, and generic USB CDC support (ported from
Linux 2.6.27 to U-boot)
* 2/3 Add UDC files for the Atmel AT91 family.
* 3/3 Add support for USB-CDC-ECM support to the at91sam9261-ek development kit.

Patch 1/3 is quite big (140 kB) and may get bounced from the
mailinglist due to its size, therefore I also attached it bzip2
compressed to this mail.

This series lives already for a long time in the u-boot-usb branch and
it is time to get this to mainline.
The last few days 2 series of patches were posted on the ML that
require this series to be applied to mainline first. I will collect
these series in the u-boot-usb/cdc branch until the complete series is
acceptable for mainline.

Review comments are welcome!

Kind regards,

Remy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Integrate-USB-gadget-layer-and-USB-CDC-driver-layer.patch.bz2
Type: application/x-bzip2
Size: 34319 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100812/0659a051/attachment.bin