[U-Boot] [PATCH] disk/part.c: 'usb storage' avoiding overflow when output capacity

[Sergei Trofimovich]

From: Sergei Trofimovich <slyfox at gentoo.org>

Before:
    Marvell>> usb storage
      Device 0: Vendor: StoreJet Rev:  Prod:  Transcend
                Type: Hard Disk
                Capacity: 28759.9 MB = 28.0 GB (488397168 x 512)
After:
    Marvell>> usb storage
      Device 0: Vendor: StoreJet Rev:  Prod:  Transcend
                Type: Hard Disk
                Capacity: 238475.1 MB = 232.8 GB (488397168 x 512)

Signed-off-by: Sergei Trofimovich <slyfox at gentoo.org>
---
Changes since V1:
 Fixed space usage instead of tabs. Noticed by Sergei Shtylyov.

 disk/part.c |   28 +++++++++++++++++++++++-----
 1 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/disk/part.c b/disk/part.c
index b6bae17..3ba88c7 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -109,14 +109,31 @@ block_dev_desc_t *get_dev(char* ifname, int dev)
 /*
  * reports device info to the user
  */
-void dev_print (block_dev_desc_t *dev_desc)
-{
+
 #ifdef CONFIG_LBA48
-	uint64_t lba512; /* number of blocks if 512bytes block size */
+typedef uint64_t lba512_t;
 #else
-	lbaint_t lba512;
+typedef lbaint_t lba512_t;
 #endif
 
+/*
+ * Overflowless variant of (block_count * mul_by / div_by)
+ * when div_by > mul_by
+ */
+static lba512_t lba512_muldiv (lba512_t block_count, lba512_t mul_by, lba512_t div_by)
+{
+	lba512_t bc_quot, bc_rem;
+
+	/* x * m / d == x / d * m + (x % d) * m / d */
+	bc_quot = block_count / div_by;
+	bc_rem  = block_count - div_by * bc_quot;
+	return bc_quot * mul_by + (bc_rem * mul_by) / div_by;
+}
+
+void dev_print (block_dev_desc_t *dev_desc)
+{
+	lba512_t lba512; /* number of blocks if 512bytes block size */
+
 	if (dev_desc->type == DEV_TYPE_UNKNOWN) {
 		puts ("not available\n");
 		return;
@@ -184,8 +201,9 @@ void dev_print (block_dev_desc_t *dev_desc)
 		lba = dev_desc->lba;
 
 		lba512 = (lba * (dev_desc->blksz/512));
-		mb = (10 * lba512) / 2048;	/* 2048 = (1024 * 1024) / 512 MB */
 		/* round to 1 digit */
+		mb = lba512_muldiv(lba512, 10, 2048);	/* 2048 = (1024 * 1024) / 512 MB */
+
 		mb_quot	= mb / 10;
 		mb_rem	= mb - (10 * mb_quot);
 
-- 
1.7.1