[U-Boot] Please pull u-boot-atmel/for2010.12

[Reinhard Meyer]

Dear Wolfgang, Albert,

The following changes since commit 49733aa0b9d29803384ad4bce74985f4bbe7e9aa:
  Wolfgang Denk (1):
        Merge branch 'master' of /home/wd/git/u-boot/custodians

are available in the git repository at:

  git://git.denx.de/u-boot-atmel.git for2010.12

Andreas Bießmann (1):
      arm920t/at91/reset: board_reset: define weak symbol

Reinhard Meyer (3):
      AT91: gen_atmel_mci.c: fix bug when Slot B is used
      AT91: fix EMAC gpio init in at91sam9260_devices.c
      AT91: add TOP9000 support

andreas.devel at googlemail.com (4):
      at91rm9200ek: add configure target for RAM boot
      MAKEALL: fix AT91
      arm920t/at91/timer: replace bss variables by gd
      at91rm9200ek: fix SDRAM initialistation values

 MAINTAINERS                                       |    3 +-
 MAKEALL                                           |   18 +-
 arch/arm/cpu/arm920t/at91/reset.c                 |    8 +-
 arch/arm/cpu/arm920t/at91/timer.c                 |   29 +-
 arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c |    5 +
 arch/arm/include/asm/global_data.h                |    1 +
 board/atmel/at91rm9200ek/config.mk                |    2 -
 board/emk/top9000/Makefile                        |   54 ++++
 board/emk/top9000/spi.c                           |   61 ++++
 board/emk/top9000/top9000.c                       |  290 +++++++++++++++++++
 boards.cfg                                        |    5 +-
 drivers/mmc/gen_atmel_mci.c                       |    1 +
 include/configs/at91rm9200ek.h                    |   18 ++-
 include/configs/top9000.h                         |  314 +++++++++++++++++++++
 14 files changed, 771 insertions(+), 38 deletions(-)
 delete mode 100644 board/atmel/at91rm9200ek/config.mk
 create mode 100644 board/emk/top9000/Makefile
 create mode 100644 board/emk/top9000/spi.c
 create mode 100644 board/emk/top9000/top9000.c
 create mode 100644 include/configs/top9000.h

I think this time, it's still Wolfgang doing the pull to ARM, right?

Best Regards,
Reinhard