[U-Boot] [PATCH 3/3] edb93xx: enable the uart in devicecfg register

[Alessandro Rubini]

printf goes to uart1, but it will block forever waiting for
busy to go off unless the uart is enabled first.

Signed-off-by: Alessandro Rubini <rubini at gnudd.com>
---
 board/edb93xx/edb93xx.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/board/edb93xx/edb93xx.c b/board/edb93xx/edb93xx.c
index 4df2246..dde30ff 100644
--- a/board/edb93xx/edb93xx.c
+++ b/board/edb93xx/edb93xx.c
@@ -64,6 +64,12 @@ int board_init(void)
 	value |= SYSCON_PWRCNT_UART_BAUD;
 	writel(value, &syscon->pwrcnt);
 
+	/* Enable the uart in devicecfg */
+	value = readl(&syscon->devicecfg);
+	value |= 1<<18 /* U1EN */;
+	writel(0xAA, &syscon->sysswlock);
+	writel(value, &syscon->devicecfg);
+
 	/* Machine number, as defined in linux/arch/arm/tools/mach-types */
 	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
 
-- 
1.6.0.2