[U-Boot] Booting from NAND on MX51

[Andreas Orfanos]

Hi


Did you have to make changes in cpu/arm_cortex8/start.S file?
I don't have to make any changes on DCD table anyway, as it has already produced by freescale for mx51_3stack board

Regards
Andreas





-----Original Message-----
From: Eric Bénard [mailto:eric at eukrea.com] 
Sent: 10 February 2010 13:55
To: Andreas Orfanos
Cc: U-Boot user list; sbabic at denx.de
Subject: Re: [U-Boot] Booting from NAND on MX51

Hi,

Le 10/02/2010 13:23, Andreas Orfanos a écrit :
> I have set up the right switches on the board, and I can boot RedBoot
> from nand without problem.
> Therefore it should be easy to do it on u-boot.
>
we are booting u-boot from NAND on a custom iMX51 board (using mDDR and 
not DDR2), we started from Freescale's u-boot for 3 Stack board (it's in 
their BSP which can be downloaded from their website) and customized it 
to our hardware as we have many changes vs the reference design. We are 
using a customized DCD table to configure the CPU and it works fine.

Eric