[U-Boot] [PATCH] Bug: do_reset issued via netconsole does not reset mpc83xx cpu.

[Michael Zaidman]

The do_reset routine in the cpu/mpc83xx/cpu.c file does not reset
the mpc83xx cpu when issued via netconsole.

Moving the console output "resetting the board." to the beginning of
the routine before disabling interrupts solved the problem.

Signed-off-by: Michael Zaidman <michael.zaidman at gmail.com>
---
 cpu/mpc83xx/cpu.c |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index e38a372..51180d6 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -199,7 +199,10 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 
+	puts("Resetting the board.\n");
+
 #ifdef MPC83xx_RESET
+
 	/* Interrupts and MMU off */
 	__asm__ __volatile__ ("mfmsr    %0":"=r" (msr):);
 
@@ -214,9 +217,6 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	/* confirm Reset Control Reg is enabled */
 	while(!((immap->reset.rcer) & RCER_CRE));
 
-	printf("Resetting the board.");
-	printf("\n");
-
 	udelay(200);
 
 	/* perform reset, only one bit */
@@ -238,8 +238,6 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	 */
 	addr = CONFIG_SYS_RESET_ADDRESS;
 
-	printf("resetting the board.");
-	printf("\n");
 	((void (*)(void)) addr) ();
 #endif	/* MPC83xx_RESET */
 
-- 
1.6.3.3