[U-Boot] The post_list array order change

[Wolfgang Denk]

Dear Michael Zaidman,

In message <660c0f821002150322g34255468re9cf03d2ed49347f at mail.gmail.com> you wrote:
> 
> > Just out of interest, what exactly do you test there?  Do you have
> > any
> > way of measuring if the LEDs work or not?
> 
> The test blinks the LEDs few times and performs running "1"
> ilumination. Of course only visual control is possible. The general

This is not acceptable as a POST then. Only sich tests can be used
where it is possible to automatically detect the test result. Tests
that require interactive handling or manual inspection as in your case
do not fit into this setup.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It usually takes more than three weeks to prepare  a  good  impromptu
speech.                                                  - Mark Twain