[U-Boot] The post_list array order change

[Michael Zaidman]

On Mon, Feb 15, 2010 at 10:32 PM, Wolfgang Denk <wd at denx.de> wrote:
> Dear Michael Zaidman,
>
> In message <660c0f821002150322g34255468re9cf03d2ed49347f at mail.gmail.com> you wrote:
>>
>> > Just out of interest, what exactly do you test there?  Do you have
>> > any
>> > way of measuring if the LEDs work or not?
>>
>> The test blinks the LEDs few times and performs running "1"
>> ilumination. Of course only visual control is possible. The general
>
> This is not acceptable as a POST then. Only sich tests can be used
> where it is possible to automatically detect the test result. Tests
> that require interactive handling or manual inspection as in your case
> do not fit into this setup.
>
> Best regards,
>
> Wolfgang Denk
>


Ok, got it. I moved the diagnostics LEDs sanity test into misc_init_f which is
called even earlier than post_init_f.

Thanks,
Michael