[U-Boot] AT91RM9200 boots from NOR Flash or not

[Nikumbh, Raj (IE10)]

Yeah I did pull it down at the startup. And I meant the same DBGU pins.

 

Regards

Raj Nikumbh   

 

________________________________

From: Maxim Podbereznyi [mailto:lisarden at gmail.com] 
Sent: Friday, February 19, 2010 7:41 PM
To: Nikumbh, Raj (IE10)
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] AT91RM9200 boots from NOR Flash or not

 

Did you pull BMS pin to GND? Do you mean DBGU pins by "debug port"?

2010/2/19 Nikumbh, Raj (IE10) <Raj.Nikumbh at honeywell.com>



I want to use the u-boot-1.3.4 with the patch from AT91 for my custom
board based on AT91RM9200 with 32MB SDRAM (MT48LC8M16A2) and 8MB flash
(AT49BV6416-70TI). I am directly flashing the image to flash location at
0x10000000 (beginning of the flash). But I am not able to see anything
on my debug port.



I  want to know if I am doing something wrong.


_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot