[U-Boot] [PATCH] sdhc: use reset value instead of a hardcoded value to set wml
Roy Zang
tie-fei.zang at freescale.com
Wed Feb 24 09:42:21 CET 2010
From: Roy Zang <tie-fei.zang at freescale.com>
Use reset value instead of a hardcoded value to set wml.
Signed-off-by: Roy Zang <tie-fei.zang at freescale.com>
---
drivers/mmc/fsl_esdhc.c | 8 +++++---
include/fsl_esdhc.h | 4 +++-
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 34a2585..dc37bf8 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2007, Freescale Semiconductor, Inc
+ * Copyright 2007, 2010 Freescale Semiconductor, Inc
* Andy Fleming
*
* Based vaguely on the pxa mmc code:
@@ -110,7 +110,8 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
if (wml_value > 0x10)
wml_value = 0x10;
- wml_value = 0x100000 | wml_value;
+ wml_value = in_be32(®s->wml) & (~WML_RD_WML_MASK) |
+ wml_value;
out_be32(®s->dsaddr, (u32)data->dest);
} else {
@@ -120,7 +121,8 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
return TIMEOUT;
}
- wml_value = wml_value << 16 | 0x10;
+ wml_value = in_be32(®s->wml) & (~WML_WR_WML_MASK) |
+ (wml_value << 16);
out_be32(®s->dsaddr, (u32)data->src);
}
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index adb43d7..3b5665d 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -2,7 +2,7 @@
* FSL SD/MMC Defines
*-------------------------------------------------------------------
*
- * Copyright 2007-2008, Freescale Semiconductor, Inc
+ * Copyright 2007-2008, 2010 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -130,6 +130,8 @@
#define WML 0x2e044
#define WML_WRITE 0x00010000
+#define WML_RD_WML_MASK 0xff
+#define WML_WR_WML_MASK 0xff0000
#define BLKATTR 0x2e004
#define BLKATTR_CNT(x) ((x & 0xffff) << 16)
--
1.5.6.5
More information about the U-Boot
mailing list