[U-Boot] MPC8548 based board Hanging at different conditions

Ravi Prakash Reddy M mraviprakashreddy at bel.co.in
Fri Feb 26 12:33:55 CET 2010


Dear All,

we are using MPC8548 based custom board, with DDR2 memory. we have successfully ported U-boot 1.3.1 and linux 2.6.19.

but sometimes the board is hanging at the following conditions

- afer relocating to RAM


U-Boot 1.3.1 (Aug 21 2009 - 16:42:56)

CPU:   8548_E, Version: 2.1, (0x80390021)
Core:  E500, Version: 2.2, (0x80210022)
Clock Configuration:
       CPU:1056 MHz, CCB: 528 MHz,
       DDR: 264 MHz, LBC:  66 MHz
L1:    D-cache 32 kB enabled
       I-cache 32 kB enabled
Board: CDS Version 0xf8, PCI Slot 4
CPU Board Revision 255.248 (0xfff8)
I2C:   ready
DRAM:  Initializing
    SDRAM: 64 MB
    DDR: 1024 MB

HANG....



- sometime it will boot u-boot,   HANG while executing u-boot commands
- sometime  booting Linux,   HANG while running some applications  in linux

what could be the reason, can anyboby explain

thank you
mrp





Confidentiality Notice

The information contained in this electronic message and any 
attachments to this message are intended for the exclusive use of
the addressee(s) and may contain confidential or privileged 
information. If you are not the intended recipient, please notify
the sender at Bharat Electronics  or support at bel.co.in immediately
and destroy all copies of this message and any attachments.



More information about the U-Boot mailing list