[U-Boot] [PATCH v2 0/3] MXC: Add NAND support for i.MX31
Magnus Lilja
lilja.magnus at gmail.com
Mon Jan 4 21:01:34 CET 2010
Hi
I received no further comments on these patches after posting
v2 (the NAND part is ACK-ed by Scott Wood). Could someone
pull these? I applied them to the current u-boot tip without
any problems.
Regads, Magnus
Magnus Lilja skrev:
> Hi all,
>
> This series adds NAND support for i.MX31 using the mxc_nand driver
> that was added for i.MX27. The same NAND flash controller is used
> in i.MX31.
>
> Tested on i.MX31 Litekit. MAKEALL ARM11&ARM9 performed.
>
> Changes since v1: Changed variable name in mxc_nand.c.
>
> Regards, Magnus
>
>
>
> Magnus Lilja (3):
> MX31: Add struct definition for clock control module in i.MX31.
> mxc_nand: Update driver to work with i.MX31.
> MX31: Activate NAND support for i.MX31 Litekit board.
>
> drivers/mtd/nand/mxc_nand.c | 34 ++++++++++++++++++++++++++--
> include/asm-arm/arch-mx31/mx31-regs.h | 39 +++++++++++++++++++++++++++++++++
> include/configs/imx31_litekit.h | 10 ++++++++
> 3 files changed, 80 insertions(+), 3 deletions(-)
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
More information about the U-Boot
mailing list