January 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Jan 1 02:39:10 CET 2010
Ending: Sun Jan 31 23:25:45 CET 2010
Messages: 1426

• [U-Boot] turning off interactive mode...   Steve Iribarne (GMail)
• [U-Boot] CONGRATULATIONS!!!   SHELL LOTTERY 2010
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Albert ARIBAUD
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Albert ARIBAUD
• [U-Boot] ARM GLOBAL_DATA_PTR gd issue   Albert ARIBAUD
• [U-Boot] [PATCH] Call gentenv_IPaddr only if CONFIG_CMD_NET set   Albert ARIBAUD
• [U-Boot] [PATCH] Call gentenv_IPaddr only if CONFIG_CMD_NET set   Albert ARIBAUD
• [U-Boot] [PATCH] Call gentenv_IPaddr only if CONFIG_CMD_NET set   Albert ARIBAUD
• [U-Boot] [PATCH V4 1/3] Initial support for Marvell Orion5x SoC   Albert ARIBAUD
• [U-Boot] [PATCH V4 3/3] Add support for the LaCie ED Mini V2 board   Albert ARIBAUD
• [U-Boot] [PATCH V4 3/3] Add support for the LaCie ED Mini V2 board   Albert ARIBAUD
• [U-Boot] [PATCH V4 1/3] Initial support for Marvell Orion5x SoC   Albert ARIBAUD
• [U-Boot] [PATCH V4 1/3] Initial support for Marvell Orion5x SoC   Albert ARIBAUD
• [U-Boot] [PATCH V4 3/3] Add support for the LaCie ED Mini V2 board   Albert ARIBAUD
• [U-Boot] [PATCH V4 3/3] Add support for the LaCie ED Mini V2 board   Albert ARIBAUD
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   Albert ARIBAUD
• [U-Boot] Problem with compiled u-boot on Atmel ngw100 board   Steve Anderson
• [U-Boot] [PATCH] Call gentenv_IPaddr only if CONFIG_CMD_NET set   Albert Aribaud
• [U-Boot] [PATCH V4 1/3] Initial support for Marvell Orion5x SoC   Albert Aribaud
• [U-Boot] [PATCH V4 2/3] Add Orion5x support to 16550 device driver   Albert Aribaud
• [U-Boot] [PATCH V4 3/3] Add support for the LaCie ED Mini V2 board   Albert Aribaud
• [U-Boot] Issue in drivers/mmc/mmc.c   Quentin Armitage
• [U-Boot] There appears to be the potential for an undetected error in fs/ext2/dev.c ext2fs_devread()   Quentin Armitage
• [U-Boot] [U-boot] There appears to be the potential for an undetected error in fs/ext2/dev.c ext2fs_devread()   Quentin Armitage
• [U-Boot] Issue in drivers/mmc/mmc.c   Quentin Armitage
• [U-Boot] MX51 Support in u-boot   Stefano Babic
• [U-Boot] [PATCH 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Stefano Babic
• [U-Boot] [PATCH 2/9] MX51: Add initial support for the Freescale MX51   Stefano Babic
• [U-Boot] [PATCH 3/9] MX51: Add register definitions   Stefano Babic
• [U-Boot] [PATCH 4/9] MX51: Add pin and multiplexer definitions.   Stefano Babic
• [U-Boot] [PATCH 5/9] serial_mxc: add support for MX51 processor   Stefano Babic
• [U-Boot] [PATCH 6/9] fec_mxc: add support for MX51 processor   Stefano Babic
• [U-Boot] [PATCH 7/9] fsl_esdhc: add support for mx51 processor   Stefano Babic
• [U-Boot] [PATCH 8/9] mmc: check correctness of the voltage mask in ocr   Stefano Babic
• [U-Boot] [PATCH 9/9] Add initial support for Freescale mx51evk board   Stefano Babic
• [U-Boot] [PATCH 2/9] MX51: Add initial support for the Freescale MX51   Stefano Babic
• [U-Boot] MX51 Support V2   Stefano Babic
• [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Stefano Babic
• [U-Boot] [PATCH V2 2/9] MX51: Add initial support for the Freescale MX51   Stefano Babic
• [U-Boot] [PATCH V2 3/9] MX51: Add register definitions   Stefano Babic
• [U-Boot] [PATCH V2 4/9] MX51: Add pin and multiplexer definitions.   Stefano Babic
• [U-Boot] [PATCH V2 5/9] serial_mxc: add support for MX51 processor   Stefano Babic
• [U-Boot] [PATCH V2 6/9] fec_mxc: add support for MX51 processor   Stefano Babic
• [U-Boot] [PATCH V2 7/9] fsl_esdhc: add support for mx51 processor   Stefano Babic
• [U-Boot] [PATCH V2 8/9] mmc: check correctness of the voltage mask in ocr   Stefano Babic
• [U-Boot] [PATCH V2 9/9] Add initial support for Freescale mx51evk board   Stefano Babic
• [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Stefano Babic
• [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Stefano Babic
• [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Stefano Babic
• [U-Boot] [PATCH 3/9] MX51: Add register definitions   Stefano Babic
• [U-Boot] [PATCH 2/9] MX51: Add initial support for the Freescale MX51   Stefano Babic
• [U-Boot] [PATCH 5/9] serial_mxc: add support for MX51 processor   Stefano Babic
• [U-Boot] [PATCH 9/9] Add initial support for Freescale mx51evk board   Stefano Babic
• [U-Boot] [PATCH 7/9] fsl_esdhc: add support for mx51 processor   Stefano Babic
• [U-Boot] [PATCH 6/9] fec_mxc: add support for MX51 processor   Stefano Babic
• [U-Boot] [PATCH 9/9] Add initial support for Freescale mx51evk board   Stefano Babic
• [U-Boot] [PATCH 6/9] fec_mxc: add support for MX51 processor   Stefano Babic
• [U-Boot] [PATCH] SPI: add support for i.MX51 processor (mxc_spi)   Stefano Babic
• [U-Boot] [PATCH V2 7/9] fsl_esdhc: add support for mx51 processor   Stefano Babic
• [U-Boot] [PATCH V3 01/11] mkimage: Add Freescale imx Boot Image support (imximage)   Stefano Babic
• [U-Boot] [PATCH V3 02/11] MX51: Add initial support for the Freescale MX51   Stefano Babic
• [U-Boot] [PATCH V3 03/11] MX51: Add register definitions   Stefano Babic
• [U-Boot] [PATCH V3 04/11] MX51: Add pin and multiplexer definitions.   Stefano Babic
• [U-Boot] [PATCH V3 05/11] serial_mxc: add support for MX51 processor   Stefano Babic
• [U-Boot] [PATCH V3 06/11] mmc: check correctness of the voltage mask in ocr   Stefano Babic
• [U-Boot] [PATCH V3 07/11] fec_mxc: add support for MX51 processor   Stefano Babic
• [U-Boot] [PATCH V3 08/11] MMC: add weak function to detect MMC/SD card   Stefano Babic
• [U-Boot] [PATCH V3 09/11] ARM/PPC: add a common way to access registers   Stefano Babic
• [U-Boot] [PATCH V3 10/11] fsl_esdhc: add support for mx51 processor   Stefano Babic
• [U-Boot] [PATCH V3 11/11] Add initial support for Freescale mx51evk board   Stefano Babic
• [U-Boot] imx51 u-boot   Stefano Babic
• [U-Boot] [PATCH V3 09/11] ARM/PPC: add a common way to access registers   Stefano Babic
• [U-Boot] [PATCH V4 09/11] ARM/PPC: add a common way to access registers   Stefano Babic
• [U-Boot] [PATCH V4 10/11] fsl_esdhc: add support for mx51 processor   Stefano Babic
• [U-Boot] imx51 u-boot   Stefano Babic
• [U-Boot] imx51 u-boot   Stefano Babic
• [U-Boot] imx51 u-boot   Stefano Babic
• [U-Boot] imx51 u-boot   Stefano Babic
• [U-Boot] [PATCH] mkimage: SEGFAULT with imximage on 64 bit systems   Stefano Babic
• [U-Boot] [PATCH V4 09/11] ARM/PPC: add a common way to access registers   Stefano Babic
• [U-Boot] [PATCH] mkimage: SEGFAULT with imximage on 64 bit systems   Stefano Babic
• [U-Boot] U-Boot for LENO3 processor board   K Balaji
• [U-Boot] U-Boot for LENO3 processor board   K Balaji
• [U-Boot] U-Boot for LENO3 processor board   K Balaji
• [U-Boot] CFI not detecting S29 flash device on 405gp board   Jerry Van Baren
• [U-Boot] MPC8315 uboot hangs on relocation   Jerry Van Baren
• [U-Boot] FDT support in u-boot   Jerry Van Baren
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   Jerry Van Baren
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   Jerry Van Baren
• [U-Boot] [PATCH v2] Make getenv_IPaddr() global   Dirk Behme
• [U-Boot] [PATCH] TI DaVinci: Driver for the davinci SPI controller   Dirk Behme
• [PATCH] OMAP3: Beagle: Update revision detection   Dirk Behme
• [U-Boot] [PATCH v3] TI DaVinci: Driver for the davinci SPI controller   Dirk Behme
• [U-Boot] zoom2 build broken   Dirk Behme
• [U-Boot] [PATCH v2] Make getenv_IPaddr() global   Dirk Behme
• [U-Boot] ARM breakage   Dirk Behme
• [U-Boot] [PATCH] Fix breakage in SMC EEPROM standalone applications   Dirk Behme
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Dirk Behme
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Dirk Behme
• [U-Boot] TI:OMAP: [PATCH 7/7] Add 720Mhz support for Beagle Rev C4   Dirk Behme
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Dirk Behme
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Dirk Behme
• [U-Boot] [PATCH] musb: Add host support for DM365 EVM   Remy Bohmer
• [U-Boot] [PATCH 3/3] Adds EHCI definitions to sequoia board configuration file.   Remy Bohmer
• [U-Boot] [PATCH 2/3] Add ppc440epx USB ehci support.   Remy Bohmer
• [U-Boot] [PATCH 1/3] Fix EHCI port reset.   Remy Bohmer
• [U-Boot] [PATCH] PCIe, USB: Replace 'end point' references with 'endpoint'   Remy Bohmer
• [U-Boot] [PATCH v2 9/9] usbd driver support for SPEAr SoCs   Remy Bohmer
• [U-Boot] Pull request: u-boot-usb   Remy Bohmer
• [U-Boot] [PATCH] musb: Add host support for DM365 EVM   Remy Bohmer
• [U-Boot] [PATCH] usb: musb: add virtual root hub control support   Remy Bohmer
• [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs   Remy Bohmer
• [U-Boot] [PATCH] usb: musb: fix Blackfin DMA register padding   Remy Bohmer
• [U-Boot] USB storage problem with SCSI commands   Remy Bohmer
• [U-Boot] [PATCH v2] musb: Add host support for DM365 EVM   Remy Bohmer
• [U-Boot] [patch 1/2 V2] fix USB initialisation procedure   Remy Bohmer
• [U-Boot] imx51 u-boot   Rick Bronson
• [U-Boot] imx51 u-boot   Rick Bronson
• [U-Boot] imx51 u-boot   Rick Bronson
• [U-Boot] imx51 u-boot   Rick Bronson
• [U-Boot] imx51 u-boot   Rick Bronson
• [U-Boot] imx51 u-boot   Rick Bronson
• [U-Boot] imx51 u-boot   Eric Bénard
• [U-Boot] Custodian for SMDK 6410, 6400, C100 and C110 boards   Naveen Krishna Ch
• [U-Boot] Custodian for SMDK 6410, 6400, C100 and C110 boards   Naveen Krishna Ch
• [U-Boot] onenand write fail with on smdkc100   Naveen Krishna Ch
• [U-Boot] onenand write fail with on smdkc100   Naveen Krishna Ch
• [U-Boot] uboot.bin for smdkc100_config fails to boot from NAND   Naveen Krishna Ch
• [U-Boot] problems with tftp   Massimiliano Cialdi
• [U-Boot] LinkedIn Messages, 1/11/2010   LinkedIn Communication
• [U-Boot] Winner !!!   D.S.T.V Company
• [U-Boot] £950.000.00 GBP has been awarded to you in our Mercedes Benz New Year Splash send your details   Mercedez Benz Award Company
• [U-Boot] FDT support in u-boot   Ronny D
• [U-Boot] [PATCH] Add bootcount to AT91   Anders Darander
• [U-Boot] [PATCH] Add bootcount to AT91   Anders Darander
• [U-Boot] [STATUS] Patch status update   Anders Darander
• [U-Boot] 83xx, uec: adjust enet_interface settings on the fly.   Liu Dave-R63238
• [U-Boot] 83xx, uec: adjust enet_interface settings on the fly.   Liu Dave-R63238
• [U-Boot] 83xx, uec: adjust enet_interface settings on the fly.   Liu Dave-R63238
• [U-Boot] [PATCH] 85xx/eSDHC: fix eSDHC clock frequency mask   Liu Dave-R63238
• [U-Boot] problem building fw_printenv   Kári Davíðsson
• [U-Boot] Profiling uboot   Basavaraj Dengi
• [U-Boot] Profiling uboot   Basavaraj Dengi
• [U-Boot] [PATCH v2 3/3] powerpc: Add support for ram filesystems in FIT uImages   Wolfgang Denk
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Wolfgang Denk
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Wolfgang Denk
• [U-Boot] Sequoia EHCI   Wolfgang Denk
• [U-Boot] [PATCH] Make getenv_IPaddr() global   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] powerpc: Add support for ram filesystems in FIT uImages   Wolfgang Denk
• [U-Boot] [PATCH v2 3/3] powerpc: Add support for ram filesystems in FIT uImages   Wolfgang Denk
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Wolfgang Denk
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx (fixed)   Wolfgang Denk
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Wolfgang Denk
• [U-Boot] NS16550 Register structure   Wolfgang Denk
• [U-Boot] NS16550 Register structure   Wolfgang Denk
• [U-Boot] using U-boot to lauch OS-less application   Wolfgang Denk
• [U-Boot] MPC8315 uboot hangs on relocation   Wolfgang Denk
• [U-Boot] Custodian for SMDK 6410, 6400, C100 and C110 boards   Wolfgang Denk
• [U-Boot] Pull request - mpc85xx   Wolfgang Denk
• [U-Boot] [GIT PULL] please pull u-boot-mpc83xx   Wolfgang Denk
• [U-Boot] Pull request: u-boot-usb   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] ARM pull request   Wolfgang Denk
• [U-Boot] start a second kernel/filesystem if first one is corrupted   Wolfgang Denk
• [U-Boot] u-boot on ARM PIC?   Wolfgang Denk
• [U-Boot] start a second kernel/filesystem if first one is corrupted   Wolfgang Denk
• [U-Boot] U-Boot Crashes with Dumps   Wolfgang Denk
• [U-Boot] start a second kernel/filesystem if first one is corrupted   Wolfgang Denk
• [U-Boot] [PATCH] JFFS2: drop support for LZARI compression mode   Wolfgang Denk
• [U-Boot] [PATCH] JFFS2: drop support for LZARI compression mode   Wolfgang Denk
• [U-Boot] [PATCH] malloc: return NULL if not initialized yet   Wolfgang Denk
• [U-Boot] [PATCH] JFFS2: drop support for LZARI compression mode   Wolfgang Denk
• [U-Boot] [PATCH] malloc: return NULL if not initialized yet   Wolfgang Denk
• [U-Boot] [PATCH 0/9] Add support for i.MX25 SOC and TX25 board   Wolfgang Denk
• [U-Boot] [PATCH 0/9] Add support for i.MX25 SOC and TX25 board   Wolfgang Denk
• [U-Boot] [PATCH 9/9] Add support for KARO TX25 board   Wolfgang Denk
• [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Wolfgang Denk
• [U-Boot] [PATCH] Add support for jadecpu board   Wolfgang Denk
• [U-Boot] [PATCH 2/9] MX51: Add initial support for the Freescale MX51   Wolfgang Denk
• [U-Boot] [PATCH 3/9] MX51: Add register definitions   Wolfgang Denk
• [U-Boot] [PATCH 4/9] MX51: Add pin and multiplexer definitions.   Wolfgang Denk
• [U-Boot] [PATCH 5/9] serial_mxc: add support for MX51 processor   Wolfgang Denk
• [U-Boot] [PATCH 6/9] fec_mxc: add support for MX51 processor   Wolfgang Denk
• [U-Boot] [PATCH 7/9] fsl_esdhc: add support for mx51 processor   Wolfgang Denk
• [U-Boot] [PATCH 9/9] Add initial support for Freescale mx51evk board   Wolfgang Denk
• [U-Boot] [PATCH-V2 0/9] Add support for i.MX25 SOC and TX25 board   Wolfgang Denk
• [U-Boot] [PATCH] JFFS2: drop support for LZARI compression mode   Wolfgang Denk
• [U-Boot] [PATCH] malloc: return NULL if not initialized yet   Wolfgang Denk
• [U-Boot] [PATCH] Nand boot: MPC8569 support   Wolfgang Denk
• [U-Boot] [PATCH 0/4] No GOT in IRQ and use r12 as GOT ptr   Wolfgang Denk
• [U-Boot] [PATCH v2] Make getenv_IPaddr() global   Wolfgang Denk
• [U-Boot] [PATCH] PCIe, USB: Replace 'end point' references with 'endpoint'   Wolfgang Denk
• [U-Boot] [PATCH] PCIe, USB: Replace 'end point' references with 'endpoint'   Wolfgang Denk
• [U-Boot] [PATCH 0/2] omap3: Optimize detection of cpu revision   Wolfgang Denk
• [U-Boot] [PATCH v6] TI DaVinci: Driver for the davinci SPI controller   Wolfgang Denk
• [U-Boot] [PATCH 0/4] No GOT in IRQ and use r12 as GOT ptr   Wolfgang Denk
• [U-Boot] [PATCH v2] PCIe, USB: Replace 'end point' references with 'endpoint'   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] [PATCH] TFTP: allow for adjustable retransmission timout   Wolfgang Denk
• [U-Boot] [PATCH v2] SPI: Fix 32 bit transfers in mxc_spi.c   Wolfgang Denk
• [U-Boot] [PATCH 1/4 v2] config_defaults.h: new header for common u-boot config defaults   Wolfgang Denk
• [U-Boot] NAND read error on Sequoia   Wolfgang Denk
• [U-Boot] [PATCH] Add support for Indefia Nimbus Cloud Board   Wolfgang Denk
• [U-Boot] [PATCH 1/2] mpc5xxx.h: Add structure definition for XLB arbiter block.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] mpc5xxx/cpu_init.c: Convert to IO accessors.   Wolfgang Denk
• [U-Boot] [PATCH] easylogo: add support for 16-bit RGB565   Wolfgang Denk
• [U-Boot] [PATCH] netconsole: mark local funcs with static   Wolfgang Denk
• [U-Boot] [PATCH 1/5] kgdb: add default generic stubs   Wolfgang Denk
• [U-Boot] [PATCH 2/5] kgdb: drop duplicate debugger_exception_handler   Wolfgang Denk
• [U-Boot] [PATCH 3/5] kgdb: update mem2hex/hex2mem funcs   Wolfgang Denk
• [U-Boot] [PATCH 0/5] kgdb cleanup and Blackfin kgdb port   Wolfgang Denk
• [U-Boot] [PATCH 1/2] cmd_bootm.c: Do not load a ramdisk when not booting a kernel.   Wolfgang Denk
• [U-Boot] [PATCH 2/2] cmd_bootm.c: Change interpretation of standalone image parameters.   Wolfgang Denk
• [U-Boot] [PATCH] move definition of macros likely and unlikely to compiler.h   Wolfgang Denk
• [U-Boot] Issue in drivers/mmc/mmc.c   Wolfgang Denk
• [U-Boot] There appears to be the potential for an undetected error in fs/ext2/dev.c ext2fs_devread()   Wolfgang Denk
• [U-Boot] [PATCH v3] add ASTRO MCF5373L board   Wolfgang Denk
• [U-Boot] [PATCH 1/2] cmd_eeprom: I2C updates   Wolfgang Denk
• [U-Boot] [PATCH 2/2] env, eeprom: add redundant environment support   Wolfgang Denk
• [U-Boot] powerpc: keymile boards updates   Wolfgang Denk
• [U-Boot] CRAMFS: support cramfs in RAM   Wolfgang Denk
• [U-Boot] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Wolfgang Denk
• [U-Boot] [PATCH 3/9] MX51: Add register definitions   Wolfgang Denk
• [U-Boot] Antw: Re: [PATCH] Add support for jadecpu board   Wolfgang Denk
• [U-Boot] [PATCH 2/9] MX51: Add initial support for the Freescale MX51   Wolfgang Denk
• [U-Boot] [PATCH 5/9] serial_mxc: add support for MX51 processor   Wolfgang Denk
• [U-Boot] [PATCH 9/9] Add initial support for Freescale mx51evk board   Wolfgang Denk
• [U-Boot] [PATCH] Add support for jadecpu board   Wolfgang Denk
• [U-Boot] Antw: Re: [PATCH] Add support for jadecpu board   Wolfgang Denk
• [U-Boot] [PATCH 7/9] fsl_esdhc: add support for mx51 processor   Wolfgang Denk
• [U-Boot] [PATCH 6/9] fec_mxc: add support for MX51 processor   Wolfgang Denk
• [U-Boot] MMC problem in PXA270 hardware   Wolfgang Denk
• [U-Boot] [PATCH v3] Makefile: fix parallel build   Wolfgang Denk
• [U-Boot] [PATCH] Fix breakage in SMC EEPROM standalone applications   Wolfgang Denk
• [U-Boot] [PATCH 1/2] NAND Nomadik: add CONFIG_NAND_NOMADIK_16BIT option   Wolfgang Denk
• [U-Boot] [PATCH 2/2] Add Nomadik board "usb-s8815" by Calao vendor   Wolfgang Denk
• [U-Boot] [PATCH] MAINTAINERS: fix nhk8815 board name   Wolfgang Denk
• [U-Boot] mkimage and XIP vs entry point   Wolfgang Denk
• [U-Boot] mkimage and XIP vs entry point   Wolfgang Denk
• [U-Boot] LPC2478 - reading/booting from SD card   Wolfgang Denk
• [U-Boot] Solved: U-Boot (porting) problem on MCF5445x board   Wolfgang Denk
• [U-Boot] tools/Makefile broken?   Wolfgang Denk
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Wolfgang Denk
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   Wolfgang Denk
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Wolfgang Denk
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Wolfgang Denk
• [U-Boot] [PATCH 1/3] ARM: Add support for EP93xx SoCs   Wolfgang Denk
• [U-Boot] [PATCH 3/3] Add support for EDB93xx boards   Wolfgang Denk
• [U-Boot] [PATCH 1/2] microblaze: Remove getenv_IPaddr   Wolfgang Denk
• [U-Boot] [PATCH 2/2] microblaze: zlib needs asm/unaligned.h   Wolfgang Denk
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Wolfgang Denk
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Wolfgang Denk
• [U-Boot] Profiling uboot   Wolfgang Denk
• [U-Boot] turning off interactive mode...   Wolfgang Denk
• [U-Boot] Pull request u-boot-blackfin.git   Wolfgang Denk
• [U-Boot] Pull request: nand flash   Wolfgang Denk
• [U-Boot] [GIT PULL] MIPS updates   Wolfgang Denk
• [U-Boot] [PATCH 4/4] bootm: allow people to disable this command   Wolfgang Denk
• [U-Boot] [PATCH 3/4 v2] sha1: add dedicated config option   Wolfgang Denk
• [U-Boot] [PATCH 2/4] gzip/zlib: make features optional   Wolfgang Denk
• [U-Boot] [PATCH 1/1] lmb: only force on arches that use it   Wolfgang Denk
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master   Wolfgang Denk
• [U-Boot] [PATCH] Removing Atmel from ARM926EJ-S Systems   Wolfgang Denk
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Wolfgang Denk
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Wolfgang Denk
• [U-Boot] [PATCH 1/3] image.h: avoid command.h for host tools   Wolfgang Denk
• [U-Boot] [PATCH 2/3] ubsha1: drop unnecessary includes/prototypes   Wolfgang Denk
• [U-Boot] [PATCH 3/3] tools: allow people to compile w/out configuring   Wolfgang Denk
• [U-Boot] [PATCH] mpc512x: Use in/out accessors for all registers   Wolfgang Denk
• [U-Boot] [PATCH] cs8900 driver: cleanup cs8900_initialize()   Wolfgang Denk
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Wolfgang Denk
• [U-Boot] [PATCH 4/4] bootm: allow people to disable this command   Wolfgang Denk
• [U-Boot] [PATCH RFC v2] non-blocking flash write/erase/status check functions   Wolfgang Denk
• [U-Boot] [PATCH v2] ppc4xx: Kilauea: Add CPLD version detection and EBC reconfiguration   Wolfgang Denk
• [U-Boot] [PATCH] mpc512x: Add display of reset status register   Wolfgang Denk
• [U-Boot] [PATCH v5] zlib: updated to v.1.2.3   Wolfgang Denk
• [U-Boot] ELDK for P2020/P2010   Wolfgang Denk
• [U-Boot] Please pull u-boot-ppc4xx/master (v2)   Wolfgang Denk
• [U-Boot] ARM pull request   Wolfgang Denk
• [U-Boot] ARM pull request   Wolfgang Denk
• [U-Boot] USB storage problem with SCSI commands   Wolfgang Denk
• [U-Boot] [PATCH 00/12] net: Fix return values of xxx_initialize()   Wolfgang Denk
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Wolfgang Denk
• [U-Boot] USB storage problem with SCSI commands   Wolfgang Denk
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Wolfgang Denk
• [U-Boot] modifying u-boot image to distinguish between primary and secondary   Wolfgang Denk
• [U-Boot] [PATCH v3] Freescale NFC NAND driver   Wolfgang Denk
• [U-Boot] modifying u-boot image to distinguish between primary and secondary   Wolfgang Denk
• [U-Boot] [STATUS] u-boot-2009.11.y branch / v2009.11.1 release   Wolfgang Denk
• [U-Boot] [PATCH 1/3] Add support to disable cpu's in multicore processors   Wolfgang Denk
• [U-Boot] [PATCH] Add support for Indefia Nimbus Cloud Board   Wolfgang Denk
• [U-Boot] [PATCH] Add support for Indefia Nimbus Cloud Board   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [PATCH] mpc5xxx: Support CPU internal watchdog.   Wolfgang Denk
• [U-Boot] [PATCH V3 01/11] mkimage: Add Freescale imx Boot Image support (imximage)   Wolfgang Denk
• [U-Boot] [PATCH V3 09/11] ARM/PPC: add a common way to access registers   Wolfgang Denk
• [U-Boot] [PATCH v2] gzip/zlib: make features optional   Wolfgang Denk
• [U-Boot] [PATCH] tools: give explicit libfdt paths   Wolfgang Denk
• [U-Boot] [PATCH] getline: split out for darwin systems   Wolfgang Denk
• [U-Boot] [PATCH] jffs2: fix hangs/crashs when not using CONFIG_JFFS2_PART_SIZE   Wolfgang Denk
• [U-Boot] [PATCH V4 09/11] ARM/PPC: add a common way to access registers   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [PATCH 1/4] ppc: Loose GOT access in IRQ   Wolfgang Denk
• [U-Boot] [PATCH 3/4] ppc: remove -ffixed-r14 gcc option.   Wolfgang Denk
• [U-Boot] [PATCH 4/4] ppc: Update README about the new GOT ptr.   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [PATCH v2] add ability to handle compressed images to imxtract   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] FW: [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] Please pull u-boot-mpc85xx   Wolfgang Denk
• [U-Boot] [GIT PULL] Please pull u-boot-mpc83xx.git   Wolfgang Denk
• [U-Boot] [PATCH] NetStar: Disable CONFIG_CMD_JFFS2   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] problems with tftp   Wolfgang Denk
• [U-Boot] How to get GPL free standalone programs with u-boot   Wolfgang Denk
• [U-Boot] [PATCH v2] Fix compiler warning in imximage.c due to getline prototype   Wolfgang Denk
• [U-Boot] [STATUS] Patch status update   Wolfgang Denk
• [U-Boot] Pull request - mpc85xx   Wolfgang Denk
• [U-Boot] [PATCH 1/2 v2] cramfs: make cramfs usable on non NOR flash   Wolfgang Denk
• [U-Boot] [PATCH 2/2 v2] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Wolfgang Denk
• [U-Boot] [PATCH v2] musb: Add host support for DM365 EVM   Wolfgang Denk
• [U-Boot] ARM pull request   Wolfgang Denk
• [U-Boot] How to use multiple env variables.   Wolfgang Denk
• [U-Boot] [PATCH 1/2 v2] cramfs: make cramfs usable on non NOR flash   Wolfgang Denk
• [U-Boot] NS16550 Register structure   Wolfgang Denk
• [U-Boot] U-Boot Compiling in CYGWIN environment   Wolfgang Denk
• [U-Boot] loading uImage error, Verifying Checksum ... Bad Data CRC, for what?   Wolfgang Denk
• [U-Boot] Where can I get latest u-boot?   Wolfgang Denk
• [U-Boot] UART loadb problem in u-boot   Wolfgang Denk
• [U-Boot] Transfer file using loadb   Wolfgang Denk
• [U-Boot] Transfer file using loadb   Wolfgang Denk
• [U-Boot] Transfer file using loadb   Wolfgang Denk
• [U-Boot] commit eb5eb2b0 breaks EXBITGEN board   Wolfgang Denk
• [U-Boot] AR405 build error   Wolfgang Denk
• [U-Boot] Prize for claim   Irish Online Draws
• [U-Boot] Adding EP2500 MCF5282 board [PATCH]   Michael Durrant
• [U-Boot] MCF528x cache errata / fix [PATCH]   Michael Durrant
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH]   Michael Durrant
• [U-Boot] ColdFire/M68K board.c initialization / order matters [PATCH]   Michael Durrant
• [U-Boot] Adding EP2500 MCF5282 board [PATCH] -- resent in git format   Michael Durrant
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH] -- resent in git format   Michael Durrant
• [U-Boot] ColdFire/M68K board.c initialization / order matters [PATCH] -- resent in git format   Michael Durrant
• [U-Boot] MCF528x cache errata / fix [PATCH] -- resent in git format   Michael Durrant
• [U-Boot] ColdFire/M68K board.c initialization / order matters [PATCH] -- resent in git format   Michael Durrant
• [U-Boot] ColdFire/M68K board.c initialization / order matters [PATCH] -- resent in git format   Michael Durrant
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH] -- resent in git format   Michael Durrant
• [U-Boot] Transfer file using loadb   Andrew Dyer
• [U-Boot] Overo NET_GPMC_CONFIG definitions   Scott Ellis
• [U-Boot] [PATCH] Overo GPMC registers   Scott Ellis
• [U-Boot] [PATCH 9/9] Add initial support for Freescale mx51evk board   Fabio Estevam
• [U-Boot] [PATCH 9/9] Add initial support for Freescale mx51evk board   Fabio Estevam
• [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support   Fabio Estevam
• [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver   Fabio Estevam
• [U-Boot] [PATCH 9/9] Add support for KARO TX25 board   Fabio Estevam
• [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Fabio Estevam
• [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support   Fabio Estevam
• [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Fabio Estevam
• [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Fabio Estevam
• [U-Boot] MMC problem in PXA270 hardware   Andy Fleming
• [U-Boot] 83xx, uec: adjust enet_interface settings on the fly.   Andy Fleming
• [U-Boot] [PATCH V2 7/9] fsl_esdhc: add support for mx51 processor   Andy Fleming
• [U-Boot] [UBOOT] AVR32-UC3 (EVK1100) status   Tobias Frost
• [U-Boot] [UBOOT] AVR32-UC3 (EVK1100) status   Tobias Frost
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Mike Frysinger
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Mike Frysinger
• [U-Boot] [PATCH] TI DaVinci: Driver for the davinci SPI controller   Mike Frysinger
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Mike Frysinger
• [U-Boot] [PATCH] TI DaVinci: Driver for the davinci SPI controller   Mike Frysinger
• [U-Boot] [PATCH v4] TI DaVinci: Driver for the davinci SPI controller   Mike Frysinger
• [U-Boot] [PATCH] getline: split out for darwin systems   Mike Frysinger
• [U-Boot] [PATCH] jffs2: fix hangs/crashs when not using CONFIG_JFFS2_PART_SIZE   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: add virtual root hub control support   Mike Frysinger
• [U-Boot] [RFC] MUSB-UDC issues and fixes   Mike Frysinger
• [U-Boot] [PATCH] malloc: return NULL if not initialized yet   Mike Frysinger
• [U-Boot] [PATCH 00/32] Blackfin updates for v2010.03-rc0 v2   Mike Frysinger
• [U-Boot] [PATCH 01/32] Blackfin: tweak embedded LDR env config option   Mike Frysinger
• [U-Boot] [PATCH 02/32] Blackfin: update tiny board settings (voltage/default env)   Mike Frysinger
• [U-Boot] [PATCH 03/32] Blackfin: bf537-stamp: rename SPI/MMC define   Mike Frysinger
• [U-Boot] [PATCH 04/32] Blackfin: ADI settings: enable silent console support   Mike Frysinger
• [U-Boot] [PATCH 05/32] Blackfin: bf561-acvilon: new board port   Mike Frysinger
• [U-Boot] [PATCH 06/32] Blackfin: move section length calculation to linker script   Mike Frysinger
• [U-Boot] [PATCH 07/32] Blackfin: kill off useless initdram() usage   Mike Frysinger
• [U-Boot] [PATCH 08/32] Blackfin: global_data.h: make pull in needed headers   Mike Frysinger
• [U-Boot] [PATCH 09/32] Blackfin: re-architect initcode   Mike Frysinger
• [U-Boot] [PATCH 10/32] Blackfin: support boards with no external memory   Mike Frysinger
• [U-Boot] [PATCH 11/32] Blackfin: bf527-ezkit: auto-select NAND settings   Mike Frysinger
• [U-Boot] [PATCH 12/32] Blackfin: fix L1 Instruction sizes on BF52x/BF54x   Mike Frysinger
• [U-Boot] [PATCH 13/32] Blackfin: move watchdog config check to Makefile   Mike Frysinger
• [U-Boot] [PATCH 14/32] Blackfin: use new bfin read/write mmr helper funcs   Mike Frysinger
• [U-Boot] [PATCH 15/32] Blackfin: asm/string.h: drop useless includes   Mike Frysinger
• [U-Boot] [PATCH 16/32] Blackfin: bfin_spi: let boards control idle value   Mike Frysinger
• [U-Boot] [PATCH 17/32] Blackfin: convert bfin_sdh to generic mmc   Mike Frysinger
• [U-Boot] [PATCH 18/32] Blackfin: bf533-stamp: split and cleanup CF/IDE code   Mike Frysinger
• [U-Boot] [PATCH 19/32] Blackfin: drop unused funcs from io.h   Mike Frysinger
• [U-Boot] [PATCH 20/32] Blackfin: section off the CF/IDE io.h hacks   Mike Frysinger
• [U-Boot] [PATCH 21/32] Blackfin: pull io funcs from linux   Mike Frysinger
• [U-Boot] [PATCH 22/32] Blackfin: bfin_spi: round up clock divider   Mike Frysinger
• [U-Boot] [PATCH 23/32] Blackfin: bf527-ezkit/bf548-ezkit: add musb board specific initialization   Mike Frysinger
• [U-Boot] [PATCH 24/32] Blackfin: add support for BF527-EZKIT v2.1   Mike Frysinger
• [U-Boot] [PATCH 25/32] Blackfin: add a netconsole helper   Mike Frysinger
• [U-Boot] [PATCH 26/32] Blackfin: keep hwtrace on CPLB miss   Mike Frysinger
• [U-Boot] [PATCH 27/32] Blackfin: handle anomaly 05000257   Mike Frysinger
• [U-Boot] [PATCH 28/32] Blackfin: bf518f-ezbrd: increase monitor length   Mike Frysinger
• [U-Boot] [PATCH 29/32] Blackfin: enable JFFS summary support for ADI boards   Mike Frysinger
• [U-Boot] [PATCH 30/32] Blackfin: tcm-bf518: new board port   Mike Frysinger
• [U-Boot] [PATCH 31/32] Blackfin: use sort funcs in the linker script   Mike Frysinger
• [U-Boot] [PATCH 32/32] Blackfin: drop .eh_frame from linker script   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] Pull request u-boot-blackfin.git   Mike Frysinger
• [U-Boot] [PATCH 1/1] [rfc] usb: musb: some more Blackfin stuff   Mike Frysinger
• [U-Boot] [PATCH] flash.h: pull in common.h for types   Mike Frysinger
• [U-Boot] [PATCH 3/4 v2] sha1: add dedicated config option   Mike Frysinger
• [U-Boot] [PATCH v5 08/12] SPEAr : Support for HW mac id read/write from i2c mem   Mike Frysinger
• [U-Boot] [PATCH] Fix breakage in SMC EEPROM standalone applications   Mike Frysinger
• [U-Boot] [PATCH] Fix breakage in SMC EEPROM standalone applications   Mike Frysinger
• [U-Boot] mkimage and XIP vs entry point   Mike Frysinger
• [U-Boot] [PATCH] usb: musb: fix Blackfin DMA register padding   Mike Frysinger
• [U-Boot] mkimage and XIP vs entry point   Mike Frysinger
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Mike Frysinger
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Mike Frysinger
• [U-Boot] [PATCH 1/3] image.h: avoid command.h for host tools   Mike Frysinger
• [U-Boot] [PATCH 2/3] ubsha1: drop unnecessary includes/prototypes   Mike Frysinger
• [U-Boot] [PATCH 3/3] tools: allow people to compile w/out configuring   Mike Frysinger
• [U-Boot] [PATCH 1/3] asm-generic/unaligned.h: dynamic default unaligned accesses   Mike Frysinger
• [U-Boot] [PATCH 2/3] asm-blackfin/unaligned.h: add for zlib code   Mike Frysinger
• [U-Boot] [PATCH 3/3] asm-arm/unaligned.h: switch to asm-generic/unaligned.h   Mike Frysinger
• [U-Boot] [PATCH] smc91111_eeprom: fix linking error   Mike Frysinger
• [U-Boot] [PATCH] smc911x driver: cleanup smc911x_initialize()   Mike Frysinger
• [U-Boot] [PATCH v2] gzip/zlib: make features optional   Mike Frysinger
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Mike Frysinger
• [U-Boot] [PATCH 4/4] bootm: allow people to disable this command   Mike Frysinger
• [U-Boot] [PATCH] tools: give explicit libfdt paths   Mike Frysinger
• [U-Boot] [PATCH 3/3] asm-arm/unaligned.h: switch to asm-generic/unaligned.h   Mike Frysinger
• [U-Boot] [PATCH 11/12] sh_eth: Fix return value of sh_eth_initialize()   Mike Frysinger
• [U-Boot] [PATCH 10/12] plb2800: Fix return values of plb2800_eth_initialize ()   Mike Frysinger
• [U-Boot] [PATCH 08/12] macb: Fix return values of macb_eth_initialize()   Mike Frysinger
• [U-Boot] [PATCH 04/12] fec_mxc: Fix return values of fec_probe()   Mike Frysinger
• [U-Boot] [PATCH 3/3] asm-arm/unaligned.h: switch to asm-generic/unaligned.h   Mike Frysinger
• [U-Boot] [STATUS] Patch status update   Mike Frysinger
• [U-Boot] [PATCH] mkimage: dont force entry point with xip   Mike Frysinger
• [U-Boot] [STATUS] Patch status update   Mike Frysinger
• [U-Boot] [PATCH] Fix compiler warning in imximage.c due to getline prototype   Mike Frysinger
• [U-Boot] [PATCH 01/17] SPARC: added unaligned definitions, patch supplied by Magnus Sjalander.   Mike Frysinger
• [U-Boot] [PATCH] mkimage: SEGFAULT with imximage on 64 bit systems   Mike Frysinger
• [U-Boot] SPI and spi_cs_activate   Mike Frysinger
• [U-Boot] SPI and spi_cs_activate   Mike Frysinger
• [U-Boot] [PATCH 3/4] fsl-ddr: add override for the Rtt_WR   Kumar Gala
• [U-Boot] [PATCH v2] ppc/p4080: Add Corenet Platform Cache (CPC) registers   Kumar Gala
• [U-Boot] Pull request - mpc85xx   Kumar Gala
• [U-Boot] Pull request - mpc85xx   Kumar Gala
• [U-Boot] [PATCH 1/3] Add support to disable cpu's in multicore processors   Kumar Gala
• [U-Boot] [PATCH 2/3] 86xx: Add support for 'cpu disable' command   Kumar Gala
• [U-Boot] [PATCH 3/3] 85xx: Add support for 'cpu disable' command   Kumar Gala
• [U-Boot] [PATCH 3/3] 85xx: Add support for 'cpu disable' command   Kumar Gala
• [U-Boot] [PATCH v2 3/3] 85xx: Add support for 'cpu disable' command   Kumar Gala
• [U-Boot] [PATCH] qe: fixup the snum for MPC8569 Rev2.0   Kumar Gala
• [U-Boot] [PATCH] ppc/p4080: Fix mask width of RCW fields MEM_PLL_RAT, SYS_PLL_RAT   Kumar Gala
• [U-Boot] [PATCH v2] qe: fixup the snum for MPC8569 Rev2.0   Kumar Gala
• [U-Boot] [PATCH 1/3] Add support to disable cpu's in multicore processors   Kumar Gala
• [U-Boot] [PATCH] Revert "ppc/p4080: Fix reporting of PME & FM clock frequencies"   Kumar Gala
• [U-Boot] [PATCH 1/2] fsl_esdhc: fix wrong clock mask   Kumar Gala
• [U-Boot] [PATCH 1/2] ppc/85xx: Add PIB/ATM support for MPC8569mds   Kumar Gala
• [U-Boot] [PATCH 2/2] ppc/85xx: Add ATM config for MPC8569MDS   Kumar Gala
• [U-Boot] [PATCH] Fix the local bus divider mapping   Kumar Gala
• [U-Boot] [PATCH 2/2] p2020ds: use maximum timeout for esdhc   Kumar Gala
• [U-Boot] [PATCH v3] qe: fixup the snum for MPC8569 Rev2.0   Kumar Gala
• [U-Boot] [PATCH 2/2] 85xx/p1_p2_rdb: enable hwconfig   Kumar Gala
• [U-Boot] [PATCH 1/2] 85xx/p1_p2_rdb: p1020: add muxed usb2 handling   Kumar Gala
• [U-Boot] [STATUS] Patch status update   Kumar Gala
• [U-Boot] new compiler warning   Kumar Gala
• [U-Boot] Please pull u-boot-mpc85xx   Kumar Gala
• [U-Boot] [STATUS] Patch status update   Kumar Gala
• [U-Boot] [STATUS] Patch status update   Kumar Gala
• [U-Boot] [PATCH] Fix compiler warning in imximage.c due to getline prototype   Kumar Gala
• [U-Boot] Pull request - mpc85xx   Kumar Gala
• [U-Boot] [PATCH v2] Fix compiler warning in imximage.c due to getline prototype   Kumar Gala
• [U-Boot] [PATCH v2] 85xx/p1_p2_rdb: p1020: add muxed usb2handling   Kumar Gala
• [U-Boot] Performance problems with gunzip   A. Geisreiter
• [U-Boot] Performance problems with gunzip   A. Geisreiter
• [U-Boot] Performance problems with gunzip   A. Geisreiter
• [U-Boot] Enabling ARM DCache (and MMU setup) in U-Boot   A. Geisreiter
• [U-Boot] Set TEXT_BASE via <project>.h file?   A. Geisreiter
• [U-Boot] Set TEXT_BASE via <project>.h file?   A. Geisreiter
• [U-Boot] Set TEXT_BASE via <project>.h file?   A. Geisreiter
• [U-Boot] [PATCH RFC] NAND: Improve read performance from Large Page NAND devices   Josh Gelinske
• [U-Boot] [PATCH RFC] NAND: Improve read performance from Large Page NAND devices   Josh Gelinske
• [U-Boot] [PATCH] NET: kirkwood-egiga smi access fix   Siddarth Gore
• [U-Boot] bad block table stored in nand flash   Ing. Jozef Goril
• [U-Boot] bad block table stored in nand flash   Ing. Jozef Goril
• [U-Boot] [PATCH] at91: Add esd gmbh OTC570 board support   Daniel Gorsulowski
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Daniel Gorsulowski
• [U-Boot] [PATCH][RESEND] at91: Enable slow master clock on meesc board   Daniel Gorsulowski
• [U-Boot] [PATCH] at91: Add esd gmbh OTC570 board support   Daniel Gorsulowski
• [U-Boot] [PATCH v2] at91: Add esd gmbh OTC570 board support   Daniel Gorsulowski
• [U-Boot] [STATUS] Patch status update   Daniel Gorsulowski
• [U-Boot] [PATCH] lcd: remove CONFIG_ATMEL_LCD ifdefs from lcd_setfgcolor   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-video   Anatolij Gustschin
• [U-Boot] [PATCH] Add support for Indefia Nimbus Cloud Board   Semih Hazar
• [U-Boot] [PATCH] Add support for Indefia Nimbus Cloud Board   Semih Hazar
• [U-Boot] [PATCH] Add support for Indefia Nimbus Cloud Board   Semih Hazar
• [U-Boot] U-Boot for LENO3 processor board   Daniel Hellstrom
• [U-Boot] U-Boot for LENO3 processor board   Daniel Hellstrom
• [U-Boot] [PATCH 01/17] SPARC: added unaligned definitions, patch supplied by Magnus Sjalander.   Daniel Hellstrom
• [U-Boot] [PATCH 02/17] GRETH: Added support for selecting PHY address from config, PHY address was always set to zero before.   Daniel Hellstrom
• [U-Boot] [PATCH 03/17] GRETH: Added extra RESET, this is needed if GRETH was stopped during an ethernet frame reception.   Daniel Hellstrom
• [U-Boot] [PATCH 04/17] LEON3: reimplemented AMBA Plug&Play scanning routines.   Daniel Hellstrom
• [U-Boot] [PATCH 05/17] LEON3: added memory controller initialization using the new AMBA PnP routines.   Daniel Hellstrom
• [U-Boot] [PATCH 06/17] LEON3: Moved GRLIB core header files to common include/grlib directory   Daniel Hellstrom
• [U-Boot] [PATCH 07/17] LEON3: serial baud rate register support multiple buses with different frequency.   Daniel Hellstrom
• [U-Boot] [PATCH 08/17] SPARC: added function that checks if IRQ is on or off.   Daniel Hellstrom
• [U-Boot] [PATCH 09/17] LEON3: added busy wait function, made wait_ms() work when IRQ is disabled.   Daniel Hellstrom
• [U-Boot] [PATCH 10/17] LEON3: added CPU count and frequency detection.   Daniel Hellstrom
• [U-Boot] [PATCH 11/17] SPARC: removed USB stop from linux bootm, arch-independent bootm stop USB.   Daniel Hellstrom
• [U-Boot] [PATCH 12/17] SPARC: added optional cpu_late_init routine.   Daniel Hellstrom
• [U-Boot] [PATCH 13/17] LEON3: Added GRETH EDCL debug link IP address initialization.   Daniel Hellstrom
• [U-Boot] [PATCH 14/17] LEON: added support for GRLIB SPI Memory controller, spi command interface.   Daniel Hellstrom
• [U-Boot] [PATCH 15/17] LEON3: fixed MMU table for systems with larger memory than 128MB.   Daniel Hellstrom
• [U-Boot] [PATCH 16/17] bootm command: added argument to arch_preboot_os, function may depend on OS type.   Daniel Hellstrom
• [U-Boot] [PATCH 17/17] SPARC, LEON3: added support for multiprocessing, tested Linux 2.6.21.1 SMP and RTEMS-4.10 AMP.   Daniel Hellstrom
• [U-Boot] [patch 1/2 V2] fix USB initialisation procedure   Daniel Hellstrom
• [U-Boot] [U-boot] [PATCH] Support for the Calao USB-A9260/USB-A9G20 boards   Gregory Hermant
• [U-Boot] uboot for zylonite/ces-310 board   Shivaprashanth Hiremath
• [U-Boot] [PATCH 1/3] omap3: Consolidate SDRC related operations   Hiremath, Vaibhav
• [U-Boot] [PATCH 1/3] omap3: Consolidate SDRC related operations   Hiremath, Vaibhav
• [U-Boot] OMAP3 EVM board nand support missed   Hiremath, Vaibhav
• [U-Boot] u-boot fails to read from nand flash in omap3   Hiremath, Vaibhav
• [U-Boot] [STATUS] Patch status update   Hiremath, Vaibhav
• [U-Boot] Please pull u-boot-ti master   Hiremath, Vaibhav
• [U-Boot] [PATCH v3] Makefile: fix parallel build   Daniel Hobi
• [U-Boot] Urgent Attention   Sgt. Ken Holland
• [U-Boot] [PATCH] 85xx/eSDHC: fix eSDHC clock frequency mask   Mingkai Hu
• [U-Boot] TI:OMAP: [PATCH] API to select twl4030 voltage and dev group   Grazvydas Ignotas
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 4/4] Minimal Display driver for OMAP3   Grazvydas Ignotas
• [U-Boot] Your Email Address has won a Cash prize of 500, 000.00 GBP in our New Year 2010 GOOGLE Award Promo   Maier Ingeborg
• [U-Boot] [U-Boot-Users] some flow about uboot   Hiroshi Ito
• [U-Boot] [PATCH 3/9] nand driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v2 1/9] Added README.spear   Vipin KUMAR
• [U-Boot] [PATCH v2 2/9] SPEAr600 SoC support added   Vipin KUMAR
• [U-Boot] [PATCH v2 3/9] SPEAr300 SoC support added   Vipin KUMAR
• [U-Boot] [PATCH v2 4/9] SPEAr310 SoC support added   Vipin KUMAR
• [U-Boot] [PATCH v2 5/9] SPEAr320 SoC support added   Vipin KUMAR
• [U-Boot] [PATCH v2 6/9] i2c driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v2 7/9] smi driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v2 8/9] nand(fsmc) driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v2 9/9] usbd driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v3 00/11] SPEAr : Adding support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v3 01/11] SPEAr : Adding README.spear in doc   Vipin KUMAR
• [U-Boot] [PATCH v3 02/11] SPEAr : Adding basic support for SPEAr600   Vipin KUMAR
• [U-Boot] [PATCH v3 03/11] SPEAr : Adding basic support for SPEAr300   Vipin KUMAR
• [U-Boot] [PATCH v3 04/11] SPEAr : Adding basic support for SPEAr310   Vipin KUMAR
• [U-Boot] [PATCH v3 05/11] SPEAr : Adding basic support for SPEAr320   Vipin KUMAR
• [U-Boot] [PATCH v3 06/11] SPEAr : i2c driver support addded   Vipin KUMAR
• [U-Boot] [PATCH v3 07/11] SPEAr : Support for HW macid read/write from i2c memory   Vipin KUMAR
• [U-Boot] [PATCH v3 08/11] SPEAr : Support for serial memory interface driver and serial NOR flash   Vipin KUMAR
• [U-Boot] [PATCH v3 09/11] SPEAr : Support for nand driver   Vipin KUMAR
• [U-Boot] [PATCH v3 10/11] SPEAr : Support for usbd driver and usbtty support   Vipin KUMAR
• [U-Boot] [PATCH v3 11/11] SPEAr : Support for cfi driver and parallel NOR flash   Vipin KUMAR
• [U-Boot] [PATCH v4 00/12] Support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v4 01/12] SPEAr : Adding README.spear in doc   Vipin KUMAR
• [U-Boot] [PATCH v4 02/12] SPEAr : Adding basic SPEAr architecture support.   Vipin KUMAR
• [U-Boot] [PATCH v4 03/12] SPEAr : i2c driver support added for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v4 04/12] SPEAr : smi driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v4 05/12] SPEAr : nand driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v4 06/12] SPEAr : usbd driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v4 07/12] SPEAr : Support added for SPEAr600 board   Vipin KUMAR
• [U-Boot] [PATCH v4 08/12] SPEAr : Support for HW mac id read/write from i2c mem   Vipin KUMAR
• [U-Boot] [PATCH v4 09/12] SPEAr : Support added for SPEAr300 board   Vipin KUMAR
• [U-Boot] [PATCH v4 10/12] SPEAr : emi controller initialization for CFI driver support   Vipin KUMAR
• [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board   Vipin KUMAR
• [U-Boot] [PATCH v4 12/12] SPEAr : Support added for SPEAr320 board   Vipin KUMAR
• [U-Boot] [PATCH v4 09/12] SPEAr : Support added for SPEAr300 board   Vipin KUMAR
• [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board   Vipin KUMAR
• [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v5 01/12] SPEAr : Adding README.spear in doc   Vipin KUMAR
• [U-Boot] [PATCH v5 02/12] SPEAr : Adding basic SPEAr architecture support.   Vipin KUMAR
• [U-Boot] [PATCH v5 03/12] SPEAr : i2c driver support added for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v5 04/12] SPEAr : smi driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v5 05/12] SPEAr : nand driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v5 06/12] SPEAr : usbd driver support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v5 07/12] SPEAr : Support added for SPEAr600 board   Vipin KUMAR
• [U-Boot] [PATCH v5 08/12] SPEAr : Support for HW mac id read/write from i2c mem   Vipin KUMAR
• [U-Boot] [PATCH v5 09/12] SPEAr : Support added for SPEAr300 board   Vipin KUMAR
• [U-Boot] [PATCH v5 10/12] SPEAr : emi controller initialization for CFI driver support   Vipin KUMAR
• [U-Boot] [PATCH v5 11/12] SPEAr : Support added for SPEAr310 board   Vipin KUMAR
• [U-Boot] [PATCH v5 12/12] SPEAr : Support added for SPEAr320 board   Vipin KUMAR
• [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH v5 08/12] SPEAr : Support for HW mac id read/write from i2c mem   Vipin KUMAR
• [U-Boot] [PATCH v5 08/12] SPEAr : Support for HW mac id read/write from i2c mem   Vipin KUMAR
• [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs   Vipin KUMAR
• [U-Boot] [PATCH 1/3] ARM: Add support for EP93XX SoCs   Matthias Kaehlcke
• [U-Boot] [PATCH 0/3] ARM: Add support for EDB93xx boards [rev3]   Matthias Kaehlcke
• [U-Boot] [PATCH 1/3] ARM: Add support for EP93xx SoCs   Matthias Kaehlcke
• [U-Boot] [PATCH 2/3] Add EP93xx ethernet driver   Matthias Kaehlcke
• [U-Boot] [PATCH 3/3] Add support for EDB93xx boards   Matthias Kaehlcke
• [U-Boot] [PATCH 2/3] Add EP93xx ethernet driver   Matthias Kaehlcke
• [U-Boot] [PATCH] cs8900 driver: cleanup cs8900_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH] cs8900 driver: cleanup cs8900_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH] cs8900_initialize() cleanup [rev2]   Matthias Kaehlcke
• [U-Boot] [PATCH] smc911x driver: cleanup smc911x_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH] cs8900 driver: cleanup cs8900_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH] smc911x driver: cleanup smc911x_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH] smc911x driver: cleanup smc911x_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 00/12] net: Fix return values of xxx_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 01/12] 4xx_enet: Fix return value of ppc_4xx_eth_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 02/12] bfin_EMAC: Fix return value of bfin_EMAC_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 03/12] dnet: Fix return value of dnet_eth_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 04/12] fec_mxc: Fix return values of fec_probe()   Matthias Kaehlcke
• [U-Boot] [PATCH 05/12] fsl_mcdmafec: Fix return value of mcdmafec_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 06/12] INCA IP: Fix return value of inca_switch_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 07/12] lan91c96: Fix return value of lan91c96_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 08/12] macb: Fix return values of macb_eth_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 09/12] mcffec: Fix return value of mcffec_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 10/12] plb2800: Fix return values of plb2800_eth_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 11/12] sh_eth: Fix return value of sh_eth_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 12/12] smc91111: Fix return value of smc91111_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 11/12] sh_eth: Fix return value of sh_eth_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 0/3] ARM: Add support for EDB93xx boards [rev4]   Matthias Kaehlcke
• [U-Boot] [PATCH 1/3] ARM: Add support for EP93xx SoCs   Matthias Kaehlcke
• [U-Boot] [PATCH 2/3] Add EP93xx ethernet driver   Matthias Kaehlcke
• [U-Boot] [PATCH 3/3] Add support for EDB93xx boards   Matthias Kaehlcke
• [U-Boot] [PATCH 00/12] net: Fix return values of xxx_initialize()   Matthias Kaehlcke
• [U-Boot] [PATCH 0/3] ARM: Add support for EDB93xx boards [rev5]   Matthias Kaehlcke
• [U-Boot] [PATCH 1/3] ARM: Add support for EP93xx SoCs   Matthias Kaehlcke
• [U-Boot] [PATCH 2/3] Add EP93xx ethernet driver   Matthias Kaehlcke
• [U-Boot] [PATCH 3/3] Add support for EDB93xx boards   Matthias Kaehlcke
• [U-Boot] s5pc1xx: update cache routines   Minkyu Kang
• [U-Boot] Please pull u-boot-samsung/master   Minkyu Kang
• [U-Boot] [STATUS] Patch status update   Minkyu Kang
• [PATCH] Configure PRCM registers to support 720 Mhz on Beagle   Syed Mohammed Khasim
• [PATCH] Configure DSS to enable DVI-D and S-Video Displays Color bar on S-video Displays Orange background Color on DVI-D - No Framebuffer used   Syed Mohammed Khasim
• [PATCH] Enable I2C bus switching   Syed Mohammed Khasim
• [PATCH] Support 720Mhz configuration for OMAP35xx   Syed Mohammed Khasim
• [PATCH] OMAP3 Beagle Update revision detection   Syed Mohammed Khasim
• [PATCH] OMAP3 Beagle Update revision detection   Syed Mohammed Khasim
• [PATCH] Enable I2C bus switching   Syed Mohammed Khasim
• [PATCH] Enable I2C bus switching   Syed Mohammed Khasim
• [PATCH] Support 720Mhz configuration for OMAP35xx   Syed Mohammed Khasim
• [PATCH] Minimal Display driver for OMAP3   Syed Mohammed Khasim
• [PATCH] API to select twl4030 voltage and dev group   Syed Mohammed Khasim
• [PATCH] Add support for 720Mhz   Syed Mohammed Khasim
• [PATCH] Add DSS driver for OMAP3   Syed Mohammed Khasim
• [PATCH] Add 720Mhz support for Beagle Rev C4   Syed Mohammed Khasim
• [PATCH] Enable DSS driver for Beagle   Syed Mohammed Khasim
• [PATCH] API to set twl4030 voltage and dev group   Syed Mohammed Khasim
• [PATCH] Add support for 720Mhz   Syed Mohammed Khasim
• [PATCH] Add support for 720Mhz   Syed Mohammed Khasim
• [PATCH] Add DSS driver for OMAP3   Syed Mohammed Khasim
• [PATCH] Add DSS driver for OMAP3   Syed Mohammed Khasim
• [PATCH] Enable DSS driver for Beagle   Syed Mohammed Khasim
• [PATCH] Add 720Mhz support for Beagle Rev C4   Syed Mohammed Khasim
• [PATCH] OMAP3 Beagle Update revision detection   Syed Mohammed Khasim
• [PATCH] Enable I2C bus switching   Syed Mohammed Khasim
• [PATCH] API to set twl4030 voltage and dev group   Syed Mohammed Khasim
• [PATCH] Enable DSS driver for Beagle   Syed Mohammed Khasim
• [PATCH] Add 720Mhz support for Beagle Rev C4   Syed Mohammed Khasim
• [PATCH] Fix undefined reference to `getenv_IPaddr' for ARM   Syed Mohammed Khasim
• [U-Boot] TI:OMAP:[PATCH 2/4] Support 720Mhz configuration for OMAP35xx   Michelle Konzack
• [U-Boot] u-boot on ARM PIC?   Peter Korsgaard
• [U-Boot] u-boot on ARM PIC?   Peter Korsgaard
• [U-Boot] U-Boot Compiling in CYGWIN environment   James Kosin
• [U-Boot] Fwd: Re: U-Boot Compiling in CYGWIN environment   James Kosin
• [U-Boot] [RFC] MUSB-UDC issues and fixes   Juha Kuikka
• [U-Boot] Problem with usbtty and loads   Juha Kuikka
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Vipin Kumar
• [U-Boot] [PATCH v4 02/12] SPEAr : Adding basic SPEAr architecture support.   Vipin Kumar
• [U-Boot] [PATCH v4 04/12] SPEAr : smi driver support for SPEAr SoCs   Vipin Kumar
• [U-Boot] [PATCH v4 07/12] SPEAr : Support added for SPEAr600 board   Vipin Kumar
• [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board   Vipin Kumar
• [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board   Vipin Kumar
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Vipin Kumar
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Vipin Kumar
• [U-Boot] MIPS: build status (2010.01)   Shinya Kuribayashi
• [U-Boot] [PATCH 1/2] MIPS: qemu_mips: Import asm/unaligned.h from the Linux kernel   Shinya Kuribayashi
• [U-Boot] [PATCH 2/2] MIPS: lib_mips/board.c: Fix undefined "getenv_IPaddr" build error   Shinya Kuribayashi
• [U-Boot] Flex-OneNAND related build breakage (was Re: MIPS: build status (2010.01))   Shinya Kuribayashi
• [U-Boot] Flex-OneNAND related build breakage (was Re: MIPS: build status (2010.01))   Shinya Kuribayashi
• [U-Boot] [PATCH 2/2] MIPS: lib_mips/board.c: Fix undefined "getenv_IPaddr" build error   Shinya Kuribayashi
• [U-Boot] [GIT PULL] MIPS updates   Shinya Kuribayashi
• [U-Boot] davinci dm365 relocation   Shlomo Kut
• [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Swarthout Edward L-SWARTHOU
• [U-Boot] [STATUS] Patch status update   Swarthout Edward L-SWARTHOU
• [U-Boot] [PATCH] Testing netconsole fix   Swarthout Edward L-SWARTHOU
• [U-Boot] Confirm Your Lucky Amount! !! (£1,500,000 GBP)   BRITISH NATIONAL LOTTERY
• [U-Boot] £1,000,000.00   UK NATIONAL LOTTERY
• [U-Boot] £1,000,000.00   UK NATIONAL LOTTERY
• [U-Boot] [PATCH] SPI: Fix 32 bit transfers in mxc_spi.c   Guennadi Liakhovetski
• [U-Boot] [PATCH v2 3/3] powerpc: Add support for ram filesystems in FIT uImages   Grant Likely
• [U-Boot] [PATCH v2 3/3] powerpc: Add support for ram filesystems in FIT uImages   Grant Likely
• [U-Boot] [PATCH v2 3/3] powerpc: Add support for ram filesystems in FIT uImages   Grant Likely
• [U-Boot] [PATCH] SPI: Fix 32 bit transfers in mxc_spi.c   Magnus Lilja
• [U-Boot] [PATCH v2 0/3] MXC: Add NAND support for i.MX31   Magnus Lilja
• [U-Boot] [PATCH] SPI: Fix 32 bit transfers in mxc_spi.c   Magnus Lilja
• [U-Boot] [PATCH v2] SPI: Fix 32 bit transfers in mxc_spi.c   Magnus Lilja
• [U-Boot] [PATCH 0/2] i.MX31: Activate NAND support for PDK board.   Magnus Lilja
• [U-Boot] [PATCH 1/2] MXC: Add large page oob layout for i.MX31 NAND controller.   Magnus Lilja
• [U-Boot] [PATCH 2/2] MX31: Activate NAND environment on i.MX31 PDK board.   Magnus Lilja
• [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support   Magnus Lilja
• [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support   Magnus Lilja
• [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support   Magnus Lilja
• [U-Boot] [PATCH v2] SPI: Fix 32 bit transfers in mxc_spi.c   Magnus Lilja
• [U-Boot] Claims Your Lucky Amount!!!!!!!   British National Lottery
• [U-Boot] How to use multiple env variables.   Shashi Kumar M.S
• [U-Boot] How to use multiple env variables.   Shashi Kumar M.S
• [U-Boot] mkimage and XIP vs entry point   Ken MacLeod
• [U-Boot] [PATCH 1/2] 85xx/p1_p2_rdb: p1020: add muxed usb2 handling   Vivek Mahajan
• [U-Boot] [PATCH 2/2] 85xx/p1_p2_rdb: enable hwconfig   Vivek Mahajan
• [U-Boot] using U-boot to lauch OS-less application   Mangelschots, Jef
• [U-Boot] u-boot ml510 xilinx   Wilson Martins
• [U-Boot] using U-boot to lauch OS-less application   Scott McNutt
• [U-Boot] TI:OMAP: [ PATCH 2/4 ] Configure PRCM registers to support 720 Mhz   Nishanth Menon
• [U-Boot] TI:OMAP: [PATCH 3/4] Configure DSS to enable DVI-D and S-Video   Nishanth Menon
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 3/4] Support 720Mhz configuration for OMAP35xx   Nishanth Menon
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 4/4] Minimal Display driver for OMAP3   Nishanth Menon
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 4/4] Minimal Display driver for OMAP3   Nishanth Menon
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 3/4] Support 720Mhz configuration for OMAP35xx   Nishanth Menon
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 4/4] Minimal Display driver for OMAP3   Nishanth Menon
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 3/4] Support 720Mhz configuration for OMAP35xx   Nishanth Menon
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Nishanth Menon
• [U-Boot] [beagleboard] Re: TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Paul Menzel
• [U-Boot] [PATCH] NetStar: Remove debug junk leaked into eeprom utility   Ladislav Michl
• [U-Boot] u-boot on ARM PIC?   Ladislav Michl
• [U-Boot] [PATCH] NetStar: Remove debug junk leaked into eeprom utility   Ladislav Michl
• [U-Boot] [STATUS] Patch status update   Ladislav Michl
• [U-Boot] [STATUS] Patch status update   Ladislav Michl
• [U-Boot] CFI numblocks incorrect?   Ladislav Michl
• [U-Boot] [PATCH 0/5] NetStar updates   Ladislav Michl
• [U-Boot] [PATCH 1/5] NetStar: eeprom - undefined reference to `memset'   Ladislav Michl
• [U-Boot] [PATCH 2/5] NetStar: eeprom - be less verbose   Ladislav Michl
• [U-Boot] [PATCH 3/5] NetStar: eeprom - fix linker error   Ladislav Michl
• [U-Boot] [PATCH 4/5] NetStar: fix default environment   Ladislav Michl
• [U-Boot] [PATCH 5/5] NetStar: make mtdparts default ready for recent kernels   Ladislav Michl
• [U-Boot] How to use multiple env variables.   Ladislav Michl
• [U-Boot] [PATCH] CFI: fix eraseregions numblocks   Ladislav Michl
• [U-Boot] How to use multiple env variables.   Ladislav Michl
• [U-Boot] TI:OMAP: Following patches adds support for Beagle REV C4   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [ PATCH 1/4 ] OMAP3: Beagle: Update revision detection   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [ PATCH 2/4 ] Configure PRCM registers to support 720 Mhz   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 3/4] Configure DSS to enable DVI-D and S-Video   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 4/4] Enable I2C bus switching   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [ PATCH 1/4 ] OMAP3: Beagle: Update revision detection   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 4/4] Enable I2C bus switching   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [ PATCH 2/4 ] Configure PRCM registers to support 720 Mhz   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 3/4] Configure DSS to enable DVI-D and S-Video   Khasim Syed Mohammed
• [U-Boot] TI:OMAP:[PATCH 2/4] Support 720Mhz configuration for OMAP35xx   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [ PATCH 2/4 ] Configure PRCM registers to support 720 Mhz   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: Following patches adds support for Beagle REV C4   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 1/4] OMAP3 Beagle Update revision detection   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 2/4] Enable I2C bus switching   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 3/4] Support 720Mhz configuration for OMAP35xx   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 4/4] Minimal Display driver for OMAP3   Khasim Syed Mohammed
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 4/4] Minimal Display driver for OMAP3   Khasim Syed Mohammed
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 3/4] Support 720Mhz configuration for OMAP35xx   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: Following patches adds support for Beagle REV C4   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH] API to select twl4030 voltage and dev group   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH] Add support for 720Mhz   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH] Add DSS driver for OMAP3   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH] Enable DSS driver for Beagle   Khasim Syed Mohammed
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 3/4] Support 720Mhz configuration for OMAP35xx   Khasim Syed Mohammed
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 4/4] Minimal Display driver for OMAP3   Khasim Syed Mohammed
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 3/4] Support 720Mhz configuration for OMAP35xx   Khasim Syed Mohammed
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 4/4] Minimal Display driver for OMAP3   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH] API to select twl4030 voltage and dev group   Khasim Syed Mohammed
• [U-Boot] [beagleboard] TI:OMAP: [PATCH 4/4] Minimal Display driver for OMAP3   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: Re-submitting Beagle REV C4, 720 Mhz and DSS patches   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 2/7] Enable I2C bus switching   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 3/7] API to set twl4030 voltage and dev group   Khasim Syed Mohammed
• [U-Boot] TI:OMAP:[PATCH 4/7] Add support for 720Mhz   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 5/7] Add DSS driver for OMAP3   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 6/7] Enable DSS driver for Beagle   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 7/7] Add 720Mhz support for Beagle Rev C4   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 7/7] Add 720Mhz support for Beagle Rev C4   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 2/7] Enable I2C bus switching   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 3/7] API to set twl4030 voltage and dev group   Khasim Syed Mohammed
• [U-Boot] TI:OMAP:[PATCH 4/7] Add support for 720Mhz   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 5/7] Add DSS driver for OMAP3   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 6/7] Enable DSS driver for Beagle   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 7/7] Add 720Mhz support for Beagle Rev C4   Khasim Syed Mohammed
• [U-Boot] [PATCH] Fix undefined reference to `getenv_IPaddr' for ARM   Khasim Syed Mohammed
• [U-Boot] TI:OMAP:[PATCH 4/7] Add support for 720Mhz   Khasim Syed Mohammed
• [U-Boot] Fwd: TI:OMAP: [PATCH 6/7] Enable DSS driver for Beagle   Khasim Syed Mohammed
• [U-Boot] Fwd: TI:OMAP: [PATCH 5/7] Add DSS driver for OMAP3   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 3/7] API to set twl4030 voltage and dev group   Khasim Syed Mohammed
• [U-Boot] TI:OMAP: [PATCH 2/7] Enable I2C bus switching   Khasim Syed Mohammed
• [U-Boot] MPC8315 uboot hangs on relocation   Sureshkumar Nagarathinam
• [U-Boot] Transfer file using loadb   Chetan Nanda
• [U-Boot] Transfer file using loadb   Chetan Nanda
• [U-Boot] Transfer file using loadb   Chetan Nanda
• [U-Boot] Transfer file using loadb   Chetan Nanda
• [U-Boot] How to get GPL free standalone programs with u-boot   Neugebauer, Manfred
• [U-Boot] Congratulations: You have won   MICROSOFT EMAIL PROMOTION
• [U-Boot] zoom2 build broken   Pandita, Vikram
• [U-Boot] zoom2 build broken   Pandita, Vikram
• [U-Boot] Custodian for SMDK 6410, 6400, C100 and C110 boards   Kyungmin Park
• [U-Boot] TI:OMAP: [ PATCH 1/4 ] OMAP3: Beagle: Update revision detection   Paulraj, Sandeep
• [U-Boot] TI:OMAP: [PATCH 4/4] Enable I2C bus switching   Paulraj, Sandeep
• [U-Boot] TI:OMAP: [PATCH 4/4] Enable I2C bus switching   Paulraj, Sandeep
• [U-Boot] [PATCH 0/2] omap3: Optimize detection of cpu revision   Paulraj, Sandeep
• [U-Boot] [PATCH v6] TI DaVinci: Driver for the davinci SPI controller   Paulraj, Sandeep
• [U-Boot] [PATCH v6] TI DaVinci: Driver for the davinci SPI controller   Paulraj, Sandeep
• [U-Boot] [PATCH 1/3] omap3: Consolidate SDRC related operations   Paulraj, Sandeep
• [U-Boot] [PATCH 2/3] AM35x: Add support for AM3517EVM   Paulraj, Sandeep
• [U-Boot] [PATCH v2] da830evm: Use table driven pin mux configuration   Paulraj, Sandeep
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Paulraj, Sandeep
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Paulraj, Sandeep
• [U-Boot] [PATCH] Overo GPMC registers   Paulraj, Sandeep
• [U-Boot] FW: [STATUS] Patch status update   Paulraj, Sandeep
• [U-Boot] [PATCH] OMAP3 Move declaration of gpmc_cfg.   Paulraj, Sandeep
• [U-Boot] [PATCH] NetStar: Disable CONFIG_CMD_JFFS2   Paulraj, Sandeep
• [U-Boot] [PATCH] NetStar: make crcit utility more readable.   Paulraj, Sandeep
• [U-Boot] [PATCH] NetStar: Remove debug junk leaked into eeprom utility   Paulraj, Sandeep
• [U-Boot] [STATUS] Patch status update   Paulraj, Sandeep
• [U-Boot] NS16550 Register structure   Pedanekar, Hemant
• [U-Boot] NS16550 Register structure   Pedanekar, Hemant
• [U-Boot] NS16550 Register structure   Pedanekar, Hemant
• [U-Boot] NS16550 Register structure   Pedanekar, Hemant
• [U-Boot] NS16550 Register structure   Pedanekar, Hemant
• [U-Boot] [PATCH] Support for Calao USB A9263 board based on AT91SAM9263 CPU   Thomas Petazzoni
• [PATCH] fixes for vme pci reset patch   Kim Phillips
• [PATCH] mpc83xx: minor 8315 nand boot fixes   Kim Phillips
• [U-Boot] [PATCH v2] mpc83xx: Add NAND boot support for MPC8315E-RDB boards   Kim Phillips
• [U-Boot] [PATCH v2] mpc83xx: spd_sdram.c: Disable memory controller before initializing   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: Add support for MPC8349 esd caddy2   Kim Phillips
• [U-Boot] [PATCH] mpc83xx: vme8349: Fix power up reset sequence for tsi148   Kim Phillips
• [U-Boot] 83xx: add support configure bus parking   Kim Phillips
• [U-Boot] 83xx, uec: adjust enet_interface settings on the fly.   Kim Phillips
• [U-Boot] [GIT PULL] please pull u-boot-mpc83xx   Kim Phillips
• [U-Boot] [PATCH v2] mpc83xx: Add NAND boot support for MPC8315E-RDB boards   Kim Phillips
• [U-Boot] 83xx, kmeter1: fix compile error   Kim Phillips
• [U-Boot] [STATUS] Patch status update   Kim Phillips
• [U-Boot] [GIT PULL] Please pull u-boot-mpc83xx.git   Kim Phillips
• [U-Boot] [PATCH 0/2] omap3: Optimize detection of cpu revision   Premi, Sanjeev
• [U-Boot] [PATCH 0/4] AM35x: Initial support for the processor   Premi, Sanjeev
• [U-Boot] [PATCH 0/2] omap3: Optimize detection of cpu revision   Premi, Sanjeev
• [U-Boot] [PATCH 0/2] omap3: Optimize detection of cpu revision   Premi, Sanjeev
• [U-Boot] TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4   Premi, Sanjeev
• [U-Boot] [beagleboard] RE: TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4   Premi, Sanjeev
• [U-Boot] [PATCH] OMAP3: Avoid re-write to PRM_CLKSRC_CTRL   Sanjeev Premi
• [U-Boot] [PATCH] OMAP3: Avoid re-write to PRM_CLKSRC_CTRL   Premi, Sanjeev
• [U-Boot] [PATCHv2] OMAP3: Avoid re-write to PRM_CLKSRC_CTRL   Sanjeev Premi
• [U-Boot] LPC2478 - reading/booting from SD card   Tomislav Puđa
• [U-Boot] JFFS2 fsload and nand   Mike RA9FTM
• [U-Boot] U-boot debugging on Canyonlands using BDI3000   Felix Radensky
• [U-Boot] Problem with transparent PCI-PCI bridge on Canyonlands   Felix Radensky
• [U-Boot] [PATCH] ppc4xx: Fix reporting of bootstrap options G and F on 460EX/GT   Felix Radensky
• [U-Boot] [PATCH] ppc4xx: Allow setting a single SPD EEPROM address for DDR2 DIMMs   Felix Radensky
• [U-Boot] [PATCH] ppc4xx: Fix sending type 1 PCI transactions   Felix Radensky
• [U-Boot] [PATCH v2] ppc4xx: Fix sending type 1 PCI transactions   Felix Radensky
• [U-Boot] [PATCH v2] 85xx/p1_p2_rdb: p1020: add muxed usb2handling   Harninder Rai
• [U-Boot] [PATCH v3] 85xx/p1_p2_rdb: p1020: add muxed usb2handling   Harninder Rai
• [U-Boot] [PATCH] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] [PATCH] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] [PATCH] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] [PATCH 2/3] Add board specific code for da850 EVM   Sudhakar Rajashekhara
• [U-Boot] [PATCH v2] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] [PATCH v2] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] [PATCH v3] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] [PATCH v4] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] [PATCH v2] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] [PATCH v5] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] [PATCH v6] TI DaVinci: Driver for the davinci SPI controller   Sudhakar Rajashekhara
• [U-Boot] ppc: How to get uboot (relocated) start address in RAM   Richard Retanubun
• [PATCH] PPC: Record uboot's relocated address in RAM and show in bdinfo.   Richard Retanubun
• [U-Boot] [PATCH] PPC: Record uboot's relocated address in RAM and show in bdinfo.   Richard Retanubun
• [U-Boot] [RFC] 83xx: uec: miiphybb: Added support for bitBang SMI and uec SMI enabled at the same time.   Richard Retanubun
• [U-Boot] [PATCH] PPC: Record uboot's relocated address in RAM and show in bdinfo.   Richard Retanubun
• [U-Boot] [PATCH V2] PPC: Record uboot's relocated address in RAM and show in bdinfo.   Richard Retanubun
• [U-Boot] [RFC] 83xx: uec: miiphybb: Added support for bitBang SMI and uec SMI enabled at the same time.   Richard Retanubun
• [U-Boot] [PATCH 0/9] Add support for i.MX25 SOC and TX25 board   John Rigby
• [U-Boot] [PATCH 1/9] mxc_serial replace platform specific clock   John Rigby
• [U-Boot] [PATCH 2/9] arm926ejs: add nand_spl boot support   John Rigby
• [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver   John Rigby
• [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [PATCH 5/9] fec_mxc: cleanup and factor out imx27 dependencies   John Rigby
• [U-Boot] [PATCH 6/9] Add support for Freescale MX25 SOC   John Rigby
• [U-Boot] [PATCH 7/9] fec_mxc: add imx25 support   John Rigby
• [U-Boot] [PATCH 8/9] env_nand.c: print error message and fail gracefully   John Rigby
• [U-Boot] [PATCH 9/9] Add support for KARO TX25 board   John Rigby
• [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver   John Rigby
• [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [PATCH-V2 0/9] Add support for i.MX25 SOC and TX25 board   John Rigby
• [U-Boot] [PATCH-V2 1/9] mxc_serial replace platform specific clock   John Rigby
• [U-Boot] [PATCH-V2 2/9] arm926ejs: add nand_spl boot support   John Rigby
• [U-Boot] [PATCH-V2 3/9] Add MX25 support to nand_spl fsl nfc driver   John Rigby
• [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [PATCH-V2 5/9] fec_mxc: cleanup and factor out MX27 dependencies   John Rigby
• [U-Boot] [PATCH-V2 6/9] Add support for Freescale MX25 SOC   John Rigby
• [U-Boot] [PATCH-V2 7/9] fec_mxc: add MX25 support   John Rigby
• [U-Boot] [PATCH-V2 8/9] env_nand.c: print error message and fail gracefully   John Rigby
• [U-Boot] [PATCH-V2 9/9] Add support for KARO TX25 board   John Rigby
• [U-Boot] [PATCH 6/9] fec_mxc: add support for MX51 processor   John Rigby
• [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [STATUS] Patch status update   John Rigby
• [U-Boot] [STATUS] Patch status update   John Rigby
• [U-Boot] [PATCH-V3 0/8] Add support for i.MX25 SOC and KARO TX25 board   John Rigby
• [U-Boot] [PATCH V3 1/8] mxc_serial replace platform specific clock   John Rigby
• [U-Boot] [PATCH V3 2/8] arm926ejs: add nand_spl boot support   John Rigby
• [U-Boot] [PATCH V3 3/8] Add MX25 support to nand_spl fsl nfc driver   John Rigby
• [U-Boot] [PATCH V3 4/8] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [PATCH V3 5/8] fec_mxc: cleanup and factor out MX27 dependencies   John Rigby
• [U-Boot] [PATCH V3 6/8] Add support for Freescale MX25 SOC   John Rigby
• [U-Boot] [PATCH V3 7/8] fec_mxc: add MX25 support   John Rigby
• [U-Boot] [PATCH V3 8/8] Add support for KARO TX25 board   John Rigby
• [U-Boot] [PATCH V3 3/8] Add MX25 support to nand_spl fsl nfc driver   John Rigby
• [U-Boot] [PATCH V4 3/8] Add MX25 support to nand_spl fsl nfc driver   John Rigby
• [U-Boot] [PATCH V4 4/8] Nand mxc_nand add v1.1 controller support   John Rigby
• [U-Boot] [PATCH V3 7/8] fec_mxc: add MX25 support   John Rigby
• [U-Boot] Sequoia EHCI   Stefan Roese
• [U-Boot] Board is not booting after flashing U-boot and hard reset   Stefan Roese
• [U-Boot] Board is not booting after flashing U-boot and hard reset   Stefan Roese
• [U-Boot] Sequoia EHCI   Stefan Roese
• [U-Boot] ppc440epx(sequoia) USB ehci fix.   Stefan Roese
• [U-Boot] [PATCH] PCIe, USB: Replace 'end point' references with 'endpoint'   Stefan Roese
• [U-Boot] U-Boot Crashes with Dumps   Stefan Roese
• [U-Boot] U-Boot Crashes with Dumps   Stefan Roese
• [U-Boot] U-Boot Crashes with Dumps   Stefan Roese
• [U-Boot] U-Boot Crashes with Dumps   Stefan Roese
• [U-Boot] U-Boot Crashes with Dumps   Stefan Roese
• [U-Boot] [PATCH V2] ppc4xx: Canyonlands: Fix USB host PHY reset sequence   Stefan Roese
• [U-Boot] U-Boot Crashes with Dumps   Stefan Roese
• [U-Boot] NAND read error on Sequoia   Stefan Roese
• [U-Boot] U-Boot Crashes with Dumps   Stefan Roese
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   Stefan Roese
• [U-Boot] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Stefan Roese
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   Stefan Roese
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix reporting of bootstrap options G and F on 460EX/GT   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Allow setting a single SPD EEPROM address for DDR2 DIMMs   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Kilauea: Add CPLD version detection and EBC reconfiguration   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Kilauea: Add CPLD version detection and EBC reconfiguration   Stefan Roese
• [U-Boot] [PATCH v3] ppc4xx: Kilauea: Add CPLD version detection and EBC reconfiguration   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix sending type 1 PCI transactions   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Fix sending type 1 PCI transactions   Stefan Roese
• [U-Boot] [PATCH v2] ppc4xx: Fix sending type 1 PCI transactions   Stefan Roese
• [U-Boot] Please pull u-boot-ppc4xx/master (v2)   Stefan Roese
• [U-Boot] [PATCH RFC v2] non-blocking flash write/erase/status check functions   Stefan Roese
• [U-Boot] [STATUS] Patch status update   Stefan Roese
• [U-Boot] [PATCH] ppc4xx: Fix compilation error on ML2 board   Stefan Roese
• [U-Boot] bug in ubifs   Stefan Roese
• [U-Boot] [PATCH] MAINTAINERS: fix nhk8815 board name   Alessandro Rubini
• [U-Boot] [PATCH 0/2] Add a new Nomadik board   Alessandro Rubini
• [U-Boot] [PATCH 1/2] NAND Nomadik: add CONFIG_NAND_NOMADIK_16BIT option   Alessandro Rubini
• [U-Boot] [PATCH 2/2] Add Nomadik board "usb-s8815" by Calao vendor   Alessandro Rubini
• [U-Boot] [PATCH 2/2] Add Nomadik board "usb-s8815" by Calao vendor   Alessandro Rubini
• [U-Boot] [PATCH 1/2] NAND Nomadik: add CONFIG_NAND_NOMADIK_16BIT option   Alessandro Rubini
• [U-Boot] Performance problems with gunzip   Alessandro Rubini
• [U-Boot] [PATCH 2/2] Add Nomadik board "usb-s8815" by Calao vendor   Alessandro Rubini
• [U-Boot] Performance problems with gunzip   Alessandro Rubini
• [U-Boot] [STATUS] Patch status update   Alessandro Rubini
• [U-Boot] typo ([STATUS] Patch status update)   Alessandro Rubini
• [U-Boot] [PATCH RFC 0/2] dcache on ARM   Alessandro Rubini
• [U-Boot] [PATCH RFC 1/2] flush cache for arm926   Alessandro Rubini
• [U-Boot] [PATCH RFC 2/2] arm cp15: setup mmu and enable dcache   Alessandro Rubini
• [U-Boot] [PATCH RFC 0/2] dcache on ARM   Alessandro Rubini
• [U-Boot] [PATCH RFC 0/2] dcache on ARM   Alessandro Rubini
• [U-Boot] problems with tftp   Alessandro Rubini
• [U-Boot] What linux kernel binary do I use????   Alessandro Rubini
• [U-Boot] [PATCH] lcd: remove CONFIG_ATMEL_LCD ifdefs from lcd_setfgcolor   Alessandro Rubini
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Graeme Russ
• [U-Boot] [Request for Help] Building Linux for embedded x86 - Where to start   Graeme Russ
• [U-Boot] What linux kernel binary do I use????   Graeme Russ
• [U-Boot] MMC problem in PXA270 hardware   Vaisakh P S
• [U-Boot] MMC problem in PXA270 hardware   Vaisakh P S
• [U-Boot] [Patch 5/8 Part2/3] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [Patch 5/8 Part2/3 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [Patch 5/8 Part2/3 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 2/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 3/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 4/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 5/8 V2 Part 1/3] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 5/8 V2 Part 1/3] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 5/8 V2 Part 3/3] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 6/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 7/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 8/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 5/8 V2 Part 2/3] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 5/8 V2 Part 1/3] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 2/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 0/9 V3] add at91 SoC access with c structures   Jens Scharsig
• [U-Boot] [PATCH 1/9 V3] add new CONFIG_AT91_LEGACY   Jens Scharsig
• [U-Boot] [PATCH 2/9 V3] add c structures for SoC access   Jens Scharsig
• [U-Boot] [PATCH 3/9 V3] add a new AT91 GPIO driver   Jens Scharsig
• [U-Boot] [PATCH 4/9 V3] convert all at91 files to use at91_gpio driver syntax   Jens Scharsig
• [U-Boot] [PATCH 5/9 V3] convert common files to new SoC access   Jens Scharsig
• [U-Boot] [PATCH 6/9 V3] update at91sam9263ek board to new SoC access   Jens Scharsig
• [U-Boot] [PATCH 7/9 V3] prepare joining at91rm9200 into at91   Jens Scharsig
• [U-Boot] [PATCH 8/9 V3] new at91_emac network driver (NET_MULTI api)   Jens Scharsig
• [U-Boot] [PATCH 9/9 V3] new board (eb_cpux9k2)   Jens Scharsig
• [U-Boot] [PATCH 1/9 V3.1] add new CONFIG_AT91_LEGACY   Jens Scharsig
• [U-Boot] [PATCH 2/9 V3] add c structures for SoC access   Jens Scharsig
• [U-Boot] [PATCH 6/9 V3] update at91sam9263ek board to new SoC access   Jens Scharsig
• [U-Boot] [PATCH 7/9 V3] prepare joining at91rm9200 into at91   Jens Scharsig
• [U-Boot] [PATCH 5/9 V3] convert common files to new SoC access   Jens Scharsig
• [U-Boot] TI:OMAP: [PATCH 4/4] Enable I2C bus switching   Heiko Schocher
• [U-Boot] [PATCH 1/2] cmd_eeprom: I2C updates   Heiko Schocher
• [U-Boot] [PATCH 2/2] env, eeprom: add redundant environment support   Heiko Schocher
• [U-Boot] powerpc: keymile boards updates   Heiko Schocher
• [U-Boot] CRAMFS: support cramfs in RAM   Heiko Schocher
• [U-Boot] 83xx: add support configure bus parking   Heiko Schocher
• [U-Boot] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Heiko Schocher
• [U-Boot] 83xx, uec: adjust enet_interface settings on the fly.   Heiko Schocher
• [U-Boot] 83xx, uec: adjust enet_interface settings on the fly.   Heiko Schocher
• [U-Boot] 83xx, uec: adjust enet_interface settings on the fly.   Heiko Schocher
• [U-Boot] [PATCH v3 06/11] SPEAr : i2c driver support addded   Heiko Schocher
• [U-Boot] [PATCH v4 03/12] SPEAr : i2c driver support added for SPEAr SoCs   Heiko Schocher
• [U-Boot] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Heiko Schocher
• [U-Boot] 83xx, uec: adjust enet_interface settings on the fly.   Heiko Schocher
• [U-Boot] 83xx, uec: split enet_interface in two variables, was: 83xx, uec: adjust enet_interface settings on the fly.   Heiko Schocher
• [U-Boot] 83xx, kmeter1: fix compile error   Heiko Schocher
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH]   Heiko Schocher
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH] -- resent in git format   Heiko Schocher
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH] -- resent in git format   Heiko Schocher
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH] -- resent in git format   Heiko Schocher
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH] -- resent in git format   Heiko Schocher
• [U-Boot] [STATUS] Patch status update   Heiko Schocher
• [U-Boot] [STATUS] Patch status update   Heiko Schocher
• [U-Boot] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Heiko Schocher
• [U-Boot] [PATCH 1/2 v2] cramfs: make cramfs usable on non NOR flash   Heiko Schocher
• [U-Boot] [PATCH 2/2 v2] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Heiko Schocher
• [U-Boot] [PATCH 2/2 v2] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Heiko Schocher
• [U-Boot] [PATCH 1/2 v2] cramfs: make cramfs usable on non NOR flash   Heiko Schocher
• [U-Boot] [PATCH 1/2 v2] cramfs: make cramfs usable on non NOR flash   Heiko Schocher
• [U-Boot] Ethernet doesn't work on PXA320   Dennis Semakin
• [U-Boot] Ethernet doesn't work on PXA320   Dennis Semakin
• [U-Boot] Ethernet doesn't work on Colibri PXA320   Dennis Semakin
• [U-Boot] Ethernet doesn't work on Colibri PXA320   Dennis Semakin
• [U-Boot] [U-BOOT] Ethernet problem on PXA320   Dennis Semakin
• [U-Boot] [U-BOOT] Ethernet problem on PXA320   Dennis Semakin
• [U-Boot] [U_BOOT] Colibri PXA320   Dennis Semakin
• [U-Boot] Where can I get latest u-boot?   Dennis Semakin
• [U-Boot] Where can I get latest u-boot?   Dennis Semakin
• [U-Boot] modifying u-boot image to distinguish between primary and secondary   Ravi Shekhar
• [U-Boot] modifying u-boot image to distinguish between primary and secondary   Ravi Shekhar
• [U-Boot] Uboot port for Cortex M1,M3   Shinose
• [U-Boot] u-boot ml510 xilinx   Michal Simek
• [U-Boot] Profiling uboot   Ira W. Snyder
• [U-Boot] [PATCH] musb: Add host support for DM365 EVM   Prathap Srinivas
• [U-Boot] [PATCH] musb: Add host support for DM365 EVM   Srinivas, Prathap
• [U-Boot] [PATCH v2] musb: Add host support for DM365 EVM   Prathap Srinivas
• [U-Boot] [PATCH] musb: Add host support for DM365 EVM   Srinivas, Prathap
• [U-Boot] [PATCH] musb: Add host support for DM365 EVM   Srinivas, Prathap
• [U-Boot] usage of OTP (one time programmable) flash ?   Arno Steffen
• [U-Boot] start a second kernel/filesystem if first one is corrupted   Arno Steffen
• [U-Boot] start a second kernel/filesystem if first one is corrupted   Arno Steffen
• [U-Boot] start a second kernel/filesystem if first one is corrupted   Arno Steffen
• [U-Boot] start a second kernel/filesystem if first one is corrupted   Arno Steffen
• [U-Boot] OMAP3 EVM board nand support missed   Arno Steffen
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Arno Steffen
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Arno Steffen
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Arno Steffen
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Arno Steffen
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Arno Steffen
• [U-Boot] [PATCH RFC] tsec: do not print Speed: if using netconsole   Ed Swarthout
• [U-Boot] [PATCH v2] tsec: do not print Speed: if using netconsole   Ed Swarthout
• [U-Boot] [beagleboard] RE: TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4   Syed Mohammed, Khasim
• [U-Boot] [beagleboard] RE: TI:OMAP: [PATCH] Add 720Mhz support for Beagle Rev C4   Syed Mohammed, Khasim
• [U-Boot] [PATCH v5] zlib: updated to v.1.2.3   Timur Tabi
• [U-Boot] [PATCH v5] zlib: updated to v.1.2.3   Timur Tabi
• [U-Boot] (no subject)   Lancaster Terrace
• [U-Boot] [PATCH V3 7/8] fec_mxc: add MX25 support   Lv Terry-R65388
• [U-Boot] [PATCH] TI DaVinci: Driver for the davinci SPI controller   Nick Thompson
• [U-Boot] [PATCH v2] TI DaVinci: Driver for the davinci SPI controller   Nick Thompson
• [U-Boot] [PATCH RFC] NAND: Improve read performance from Large Page NAND devices   Nick Thompson
• [U-Boot] [PATCH v2] da830evm: Use table driven pin mux configuration   Nick Thompson
• [U-Boot] u-boot fails to read from nand flash in omap3   Nick Thompson
• [U-Boot] [STATUS] Patch status update   Nick Thompson
• [U-Boot] [PATCH RFC 0/2] dcache on ARM   Nick Thompson
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Joakim Tjernlund
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Joakim Tjernlund
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Joakim Tjernlund
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Joakim Tjernlund
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Joakim Tjernlund
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Joakim Tjernlund
• [U-Boot] [PATCH 0/4] No GOT in IRQ and use r12 as GOT ptr   Joakim Tjernlund
• [U-Boot] [PATCH 0/4] No GOT in IRQ and use r12 as GOT ptr   Joakim Tjernlund
• [U-Boot] [PATCH] PPC: Record uboot's relocated address in RAM and show in bdinfo.   Joakim Tjernlund
• [U-Boot] tools/Makefile broken?   Joakim Tjernlund
• [U-Boot] tools/Makefile broken?   Joakim Tjernlund
• [U-Boot] [PATCH 1/4] ppc: Loose GOT access in IRQ   Joakim Tjernlund
• [U-Boot] [PATCH 2/4] ppc: Use r12 instead of r14 as GOT pointer.   Joakim Tjernlund
• [U-Boot] [PATCH 3/4] ppc: remove -ffixed-r14 gcc option.   Joakim Tjernlund
• [U-Boot] [PATCH 4/4] ppc: Update README about the new GOT ptr.   Joakim Tjernlund
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH] -- resent in git format   Joakim Tjernlund
• [U-Boot] [STATUS] Patch status update   Joakim Tjernlund
• [U-Boot] [PATCH v2] TI DaVinci: Driver for the davinci SPI controller   Tom
• [U-Boot] [RFC PATCH] fix compilation issue in arm cortex a8   Tom
• [U-Boot] ARM pull request   Tom
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Tom
• [U-Boot] zoom2 build broken   Tom
• [U-Boot] [PATCH v5] TI DaVinci: Driver for the davinci SPI controller   Tom
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Tom
• [U-Boot] [PATCH v6] TI DaVinci: Driver for the davinci SPI controller   Tom
• [U-Boot] [PATCH V4 3/3] Add support for the LaCie ED Mini V2 board   Tom
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Tom
• [U-Boot] [PATCH 0/2] omap3: Optimize detection of cpu revision   Tom
• [U-Boot] [RFC] MUSB-UDC issues and fixes   Tom
• [U-Boot] [PATCH v6] TI DaVinci: Driver for the davinci SPI controller   Tom
• [U-Boot] [PATCH v4 01/12] SPEAr : Adding README.spear in doc   Tom
• [U-Boot] [PATCH v4 02/12] SPEAr : Adding basic SPEAr architecture support.   Tom
• [U-Boot] [PATCH v4 04/12] SPEAr : smi driver support for SPEAr SoCs   Tom
• [U-Boot] [PATCH v4 05/12] SPEAr : nand driver support for SPEAr SoCs   Tom
• [U-Boot] [PATCH v4 06/12] SPEAr : usbd driver support for SPEAr SoCs   Tom
• [U-Boot] [PATCH v4 07/12] SPEAr : Support added for SPEAr600 board   Tom
• [U-Boot] [PATCH v4 08/12] SPEAr : Support for HW mac id read/write from i2c mem   Tom
• [U-Boot] [PATCH v4 09/12] SPEAr : Support added for SPEAr300 board   Tom
• [U-Boot] [PATCH v4 10/12] SPEAr : emi controller initialization for CFI driver support   Tom
• [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board   Tom
• [U-Boot] [PATCH v4 05/12] SPEAr : nand driver support for SPEAr SoCs   Tom
• [U-Boot] [PATCH v4 02/12] SPEAr : Adding basic SPEAr architecture support.   Tom
• [U-Boot] [PATCH v4 04/12] SPEAr : smi driver support for SPEAr SoCs   Tom
• [U-Boot] [PATCH v4 06/12] SPEAr : usbd driver support for SPEAr SoCs   Tom
• [U-Boot] [PATCH v4 09/12] SPEAr : Support added for SPEAr300 board   Tom
• [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board   Tom
• [U-Boot] Please pull u-boot-samsung/master   Tom
• [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board   Tom
• [U-Boot] [PATCH] Add support for MB86R01 from Fujitsu   Tom
• [U-Boot] Adding support for MB86R01   Tom
• [U-Boot] [PATCH] Add support for Jade display controller   Tom
• [U-Boot] [PATCH] Adding new vendor logo   Tom
• [U-Boot] [PATCH] Add support for jadecpu board   Tom
• [U-Boot] [PATCH v4 11/12] SPEAr : Support added for SPEAr310 board   Tom
• [U-Boot] [Patch 5/8 Part2/3 V2] add at91 SoC access with c structures   Tom
• [U-Boot] [U-boot] [PATCH] Support for the Calao USB-A9260/USB-A9G20 boards   Tom
• [U-Boot] TI:OMAP: [PATCH 7/7] Add 720Mhz support for Beagle Rev C4   Tom
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Tom
• [U-Boot] TI:OMAP: [PATCH 2/7] Enable I2C bus switching   Tom
• [U-Boot] [PATCH 1/3] ARM: Add support for EP93XX SoCs   Tom
• [U-Boot] [PATCH 2/8 V2] add at91 SoC access with c structures   Tom
• [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures   Tom
• [U-Boot] [PATCH 1/3] ARM: Add support for EP93XX SoCs   Tom
• [U-Boot] [PATCH 1/8 V2] add at91 SoC access with c structures   Tom
• [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs   Tom
• [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs   Tom
• [U-Boot] [PATCH v5 08/12] SPEAr : Support for HW mac id read/write from i2c mem   Tom
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Tom
• [U-Boot] [PATCH] Add support for jadecpu board   Tom
• [U-Boot] ARM breakage   Tom
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Tom
• [U-Boot] [PATCH] Add support for jadecpu board   Tom
• [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs   Tom
• [U-Boot] [PATCH][RESEND] at91: Enable slow master clock on meesc board   Tom
• [U-Boot] ARM pull request   Tom
• [U-Boot] ARM regressions   Tom
• [U-Boot] ARM pull request   Tom
• [U-Boot] [PATCH] at91: Add esd gmbh OTC570 board support   Tom
• [U-Boot] TI:OMAP: [PATCH 1/7] OMAP3 Beagle Update revision detection   Tom
• [U-Boot] TI:OMAP: [PATCH 2/7] Enable I2C bus switching   Tom
• [U-Boot] TI:OMAP: [PATCH 3/7] API to set twl4030 voltage and dev group   Tom
• [U-Boot] TI:OMAP:[PATCH 4/7] Add support for 720Mhz   Tom
• [U-Boot] TI:OMAP: [PATCH 5/7] Add DSS driver for OMAP3   Tom
• [U-Boot] TI:OMAP: [PATCH 6/7] Enable DSS driver for Beagle   Tom
• [U-Boot] TI:OMAP: [PATCH 7/7] Add 720Mhz support for Beagle Rev C4   Tom
• [U-Boot] [PATCH 3/3] asm-arm/unaligned.h: switch to asm-generic/unaligned.h   Tom
• [U-Boot] [PATCH 3/3] asm-arm/unaligned.h: switch to asm-generic/unaligned.h   Tom
• [U-Boot] Fwd: TI:OMAP: [PATCH 5/7] Add DSS driver for OMAP3   Tom
• [U-Boot] Fwd: TI:OMAP: [PATCH 6/7] Enable DSS driver for Beagle   Tom
• [U-Boot] TI:OMAP:[PATCH 4/7] Add support for 720Mhz   Tom
• [U-Boot] TI:OMAP: [PATCH 3/7] API to set twl4030 voltage and dev group   Tom
• [U-Boot] TI:OMAP: [PATCH 2/7] Enable I2C bus switching   Tom
• [U-Boot] [PATCH] OMAP3: Avoid re-write to PRM_CLKSRC_CTRL   Tom
• [U-Boot] [PATCH 2/2 v2] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Tom
• [U-Boot] [PATCH 2/2 v2] arm: suen3, suen3_v1, mgcoge2_arm_p1a support   Tom
• [U-Boot] [PATCH] OMAP3: Avoid re-write to PRM_CLKSRC_CTRL   Tom
• [U-Boot] ARM regression   Tom
• [U-Boot] [PATCH 1/9 V3] add new CONFIG_AT91_LEGACY   Tom
• [U-Boot] [PATCH 2/9 V3] add c structures for SoC access   Tom
• [U-Boot] [PATCH 3/9 V3] add a new AT91 GPIO driver   Tom
• [U-Boot] [PATCH 4/9 V3] convert all at91 files to use at91_gpio driver syntax   Tom
• [U-Boot] [PATCH 5/9 V3] convert common files to new SoC access   Tom
• [U-Boot] [PATCH 6/9 V3] update at91sam9263ek board to new SoC access   Tom
• [U-Boot] [PATCH 7/9 V3] prepare joining at91rm9200 into at91   Tom
• [U-Boot] [PATCH 8/9 V3] new at91_emac network driver (NET_MULTI api)   Tom
• [U-Boot] [PATCH 9/9 V3] new board (eb_cpux9k2)   Tom
• [U-Boot] [PATCH v2] at91: Add esd gmbh OTC570 board support   Tom
• [U-Boot] [PATCH 1/3] ARM: Add support for EP93xx SoCs   Tom
• [U-Boot] [PATCH 3/3] Add support for EDB93xx boards   Tom
• [U-Boot] [PATCH v2] Add support for the Calao QIL-A9G20 and QIL-A9260 boards   Albin Tonnerre
• [U-Boot] [PATCH] Removing Atmel from ARM926EJ-S Systems   Albin Tonnerre
• [U-Boot] [PATCH] Removing Atmel from ARM926EJ-S Systems   Albin Tonnerre
• [U-Boot] [STATUS] Patch status update   Albin Tonnerre
• [U-Boot] [RFC PATCH] fix compilation issue in arm cortex a8   Michael Trimarchi
• [U-Boot] [RFC PATCH] fix compilation issue in arm cortex a8   Michael Trimarchi
• [U-Boot] [RFC PATCH] fix compilation issue in arm cortex a8   Michael Trimarchi
• [U-Boot] [PATCH v2 3/3] powerpc: Add support for ram filesystems in FIT uImages   Peter Tyser
• [U-Boot] [PATCH] PCIe, USB: Replace 'end point' references with 'endpoint'   Peter Tyser
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Peter Tyser
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Peter Tyser
• [U-Boot] [PATCH] PCIe, USB: Replace 'end point' references with 'endpoint'   Peter Tyser
• [U-Boot] [PATCH 3/3] 85xx: Add support for 'cpu disable' command   Peter Tyser
• [U-Boot] [PATCH v2] PCIe, USB: Replace 'end point' references with 'endpoint'   Peter Tyser
• [U-Boot] [PATCH] ppc/85xx: Fix bug in setup_mp code   Peter Tyser
• [U-Boot] [STATUS] Patch status update   Peter Tyser
• [U-Boot] [PATCH RFC] tsec: do not print Speed: if using netconsole   Peter Tyser
• [U-Boot] Problem with Kernel and u-boot interface   Ramesh V
• [U-Boot] [PATCH v2 0/9] Added support for SPEAr SoCs   Armando VISCONTI
• [U-Boot] [PATCH v5 00/12] Support for SPEAr SoCs   Armando VISCONTI
• [U-Boot] [STATUS] Merge Window closed, waiting for pull requests   Armando VISCONTI
• [U-Boot] [PATCH RFC 0/2] dcache on ARM   Armando VISCONTI
• [U-Boot] [PATCH RFC 0/2] dcache on ARM   Armando VISCONTI
• [U-Boot] MMC problem in PXA270 hardware   Vaisakh
• [U-Boot] USB storage problem with SCSI commands   Alexander Varnin
• [U-Boot] USB storage problem with SCSI commands   Alexander Varnin
• [U-Boot] USB storage problem with SCSI commands   Alexander Varnin
• [U-Boot] USB storage problem with SCSI commands   Alexander Varnin
• [U-Boot] [PATCH v2] mpc83xx: Add NAND boot support for MPC8315E-RDB boards   Anton Vorontsov
• [U-Boot] [PATCH] Kirkwood: Makefile cleanup- fixed ordering (cosmetic change)   Prafulla Wadaskar
• [U-Boot] [PATCH] Kirkwood: Updated licencing to GPLv2 or later   Prafulla Wadaskar
• [U-Boot] [PATCH V4 1/3] Initial support for Marvell Orion5x SoC   Prafulla Wadaskar
• [U-Boot] [PATCH V4 1/3] Initial support for Marvell Orion5x SoC   Prafulla Wadaskar
• [U-Boot] [PATCH V4 3/3] Add support for the LaCie ED Mini V2 board   Prafulla Wadaskar
• [U-Boot] [PATCH V4 3/3] Add support for the LaCie ED Mini V2 board   Prafulla Wadaskar
• [U-Boot] [PATCH V4 3/3] Add support for the LaCie ED Mini V2 board   Prafulla Wadaskar
• [U-Boot] open u-boot on the DockStar   Prafulla Wadaskar
• [U-Boot] Pull request u-boot-marvell.git   Prafulla Wadaskar
• [U-Boot] [PATCH] NET: kirkwood-egiga smi access fix   Prafulla Wadaskar
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Prafulla Wadaskar
• [U-Boot] ARM pull request   Prafulla Wadaskar
• [U-Boot] [PATCH] Make getenv_IPaddr() global   Ben Warren
• [U-Boot] [PATCH v2] Make getenv_IPaddr() global   Ben Warren
• [U-Boot] [PATCH] Call gentenv_IPaddr only if CONFIG_CMD_NET set   Ben Warren
• [U-Boot] [PATCH] Call gentenv_IPaddr only if CONFIG_CMD_NET set   Ben Warren
• [U-Boot] [RFC] 83xx: uec: miiphybb: Added support for bitBang SMI and uec SMI enabled at the same time.   Ben Warren
• [U-Boot] [PATCH v5 08/12] SPEAr : Support for HW mac id read/write from i2c mem   Ben Warren
• [U-Boot] [PATCH v5 08/12] SPEAr : Support for HW mac id read/write from i2c mem   Ben Warren
• [U-Boot] [PATCH] Fix undefined reference to `getenv_IPaddr' for ARM   Ben Warren
• [U-Boot] ARM breakage   Ben Warren
• [U-Boot] [PATCH] Fix breakage in SMC EEPROM standalone applications   Ben Warren
• [U-Boot] [PATCH] Fix breakage in SMC EEPROM standalone applications   Ben Warren
• [U-Boot] [U-BOOT] Ethernet problem on PXA320   Ben Warren
• [U-Boot] [PATCH 2/3] Add EP93xx ethernet driver   Ben Warren
• [U-Boot] ColdFire/M68K board.c initialization / order matters [PATCH] -- resent in git format   Ben Warren
• [U-Boot] ColdFire/M68K board.c initialization / order matters [PATCH] -- resent in git format   Ben Warren
• [U-Boot] [U-BOOT] Ethernet problem on PXA320   Ben Warren
• [U-Boot] [PATCH] cs8900 driver: cleanup cs8900_initialize()   Ben Warren
• [U-Boot] [PATCH] cs8900_initialize() cleanup [rev2]   Ben Warren
• [U-Boot] [PATCH] smc91111_eeprom: fix linking error   Ben Warren
• [U-Boot] [PATCH] smc911x driver: cleanup smc911x_initialize()   Ben Warren
• [U-Boot] [PATCH 00/12] net: Fix return values of xxx_initialize()   Ben Warren
• [U-Boot] [PATCH 2/3] Add EP93xx ethernet driver   Ben Warren
• [U-Boot] [STATUS] Patch status update   Ben Warren
• [U-Boot] [PATCH] tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode   Ben Warren
• [U-Boot] [PATCH 1/5] tsec: Clean up Broadcom PHY status parsing   Ben Warren
• [U-Boot] [PATCH v2] add ASTRO MCF5373L board   Wolfgang Wegner
• [U-Boot] [PATCH v3] add ASTRO MCF5373L board   Wolfgang Wegner
• [U-Boot] start a second kernel/filesystem if first one is corrupted   Wolfgang Wegner
• [U-Boot] U-Boot (porting) problem on MCF5445x board   Wolfgang Wegner
• [U-Boot] U-Boot (porting) problem on MCF5445x board   Wolfgang Wegner
• [U-Boot] U-Boot (porting) problem on MCF5445x board   Wolfgang Wegner
• [U-Boot] [PATCH v4] add ASTRO MCF5373L board   Wolfgang Wegner
• [U-Boot] [PATCH v3] add ASTRO MCF5373L board   Wolfgang Wegner
• [U-Boot] Solved: U-Boot (porting) problem on MCF5445x board   Wolfgang Wegner
• [U-Boot] ColdFire I2C implementing I2C idle [PATCH] -- resent in git format   Wolfgang Wegner
• [U-Boot] [MCF5445x] board-specific SDRAM setup in assembler - how to do it correctly?   Wolfgang Wegner
• [U-Boot] [PATCH RFC v2] non-blocking flash write/erase/status check functions   Wolfgang Wegner
• [U-Boot] [PATCH v5] add ASTRO MCF5373L board   Wolfgang Wegner
• [U-Boot] [PATCH - not for mainline] add update to ASTRO MCF5373L board   Wolfgang Wegner
• [U-Boot] [STATUS] Patch status update   Wolfgang Wegner
• [U-Boot] Set TEXT_BASE via <project>.h file?   Wolfgang Wegner
• [U-Boot] Set TEXT_BASE via <project>.h file?   Wolfgang Wegner
• [U-Boot] SPI and spi_cs_activate   Wolfgang Wegner
• [U-Boot] SPI and spi_cs_activate   Wolfgang Wegner
• [U-Boot] The system hangs when the load_address==os.start, using uncompressed Image, ARM11.   Lai Weilin-B04597
• [U-Boot] Adding support for MB86R01   Matthias Weisser
• [U-Boot] [PATCH] Add support for MB86R01 from Fujitsu   Matthias Weisser
• [U-Boot] [PATCH] Add support for Jade display controller   Matthias Weisser
• [U-Boot] [PATCH] Adding new vendor logo   Matthias Weisser
• [U-Boot] [PATCH] Add support for jadecpu board   Matthias Weisser
• [U-Boot] [PATCH] video: Fix console display when splashscreen is used   Matthias Weisser
• [U-Boot] Antw: Re: [PATCH] Add support for jadecpu board   Matthias Weisser
• [U-Boot] [PATCH] Removing Atmel from ARM926EJ-S Systems   Matthias Weisser
• [U-Boot] [PATCH] Add support for jadecpu board   Matthias Weißer
• [U-Boot] Antw: Re: [PATCH] Add support for jadecpu board   Matthias Weißer
• [U-Boot] [PATCH] Removing Atmel from ARM926EJ-S Systems   Matthias Weißer
• [U-Boot] [PATCH] Add support for jadecpu board   Matthias Weißer
• [U-Boot] [PATCH] Adding new vendor logo   Matthias Weißer
• [U-Boot] [PATCH] Add support for MB86R01 from Fujitsu   Matthias Weißer
• [U-Boot] [PATCH] Add support for Jade display controller   Matthias Weißer
• [U-Boot] [STATUS] Patch status update   Matthias Weißer
• [U-Boot] [PATCH] Add Yaffs2 image writing support.   Li Wenhao
• [U-Boot] [PATCH ARM 1/3] s3c24x0 code style changes   Scott Wood
• [U-Boot] JFFS2 Loading Error on non 8k blocksize NAND [DEMO PATCH 1/1]   Scott Wood
• [U-Boot] [PATCH 3/9] nand driver support for SPEAr SoCs   Scott Wood
• [U-Boot] io.h   Scott Wood
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Scott Wood
• [U-Boot] [PATCH 2/4] Use LINK_OFF to access global data   Scott Wood
• [U-Boot] [PATCH v2] Davinci: davinci_nand.c performance enhancments   Scott Wood
• [U-Boot] [PATCHv2] onenand: Fix compile errors due to FlexOneNAND   Scott Wood
• [U-Boot] Breakage on arm/next   Scott Wood
• [U-Boot] [PATCH 1/3] Monahan/PXA3xx: integrate Linux NAND controller driver   Scott Wood
• [U-Boot] [PATCH 1/3] Monahan/PXA3xx: integrate Linux NAND controller driver   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] uboot.bin for smdkc100_config fails to boot from NAND   Scott Wood
• [U-Boot] [PATCH v4 05/12] SPEAr : nand driver support for SPEAr SoCs   Scott Wood
• [U-Boot] [PATCH 8/9] env_nand.c: print error message and fail gracefully   Scott Wood
• [U-Boot] [PATCH 4/9] Nand mxc_nand add v1.1 controller support   Scott Wood
• [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver   Scott Wood
• [U-Boot] [PATCH 3/9] Add v1.1 support to nand_spl fsl nfc driver   Scott Wood
• [U-Boot] [PATCH v5 05/12] SPEAr : nand driver support for SPEAr SoCs   Scott Wood
• [U-Boot] [PATCH ARM] Update the s3c2410 nand driver from linux-2.6.31.5   Scott Wood
• [U-Boot] [PATCH 0/2] i.MX31: Activate NAND support for PDK board.   Scott Wood
• [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support   Scott Wood
• [U-Boot] [PATCH 1/2] NAND Nomadik: add CONFIG_NAND_NOMADIK_16BIT option   Scott Wood
• [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add v1.1 controller support   Scott Wood
• [U-Boot] [PATCH ARM] Update the s3c2410 nand driver from linux-2.6.31.5   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [STATUS] Patch status update   Scott Wood
• [U-Boot] [PATCH v2] Nand boot: Add nand boot support for MPC8569mds board   Scott Wood
• [U-Boot] [PATCH-V2 8/9] env_nand.c: print error message and fail gracefully   Scott Wood
• [U-Boot] [STATUS] Patch status update   Scott Wood
• [U-Boot] [STATUS] Patch status update   Scott Wood
• [U-Boot] [PATCH V3 4/8] Nand mxc_nand add v1.1 controller support   Scott Wood
• [U-Boot] [PATCH V3 3/8] Add MX25 support to nand_spl fsl nfc driver   Scott Wood
• [U-Boot] bad block table stored in nand flash   Scott Wood
• [U-Boot] [PATCH v2] Nand boot: Add nand boot support for MPC8569mds board   Scott Wood
• [U-Boot] Pull request: nand flash   Scott Wood
• [U-Boot] [PATCH 1/2] fsl_esdhc: fix wrong clock mask   Li Yang
• [U-Boot] [PATCH 2/2] p2020ds: use maximum timeout for esdhc   Li Yang
• [U-Boot] [PATCH v3] Freescale NFC NAND driver   Yang, Lin
• [U-Boot] [PATCH 2/2] p2020ds: use maximum timeout for esdhc   Li Yang-R58472
• [U-Boot] [STATUS] Patch status update   Li Yang-R58472
• [U-Boot] [PATCH] qe: fixup the snum for MPC8569 Rev2.0   Liu Yu
• [U-Boot] [PATCH v2] qe: fixup the snum for MPC8569 Rev2.0   Liu Yu
• [U-Boot] [PATCH] Nand boot: MPC8569 support   Liu Yu
• [U-Boot] [PATCH v3] qe: fixup the snum for MPC8569 Rev2.0   Liu Yu
• [U-Boot] [PATCH v2] Nand boot: Add nand boot support for MPC8569mds board   Liu Yu
• [U-Boot] U-boot failed to link   He Yunlong-B20256
• [U-Boot] Sequoia EHCI   Chris Zhang
• [U-Boot] Sequoia EHCI   Chris Zhang
• [U-Boot] ppc440epx(sequoia) USB ehci fix.   Chris Zhang
• [U-Boot] [PATCH 0/3] PPC440EPX(sequoia) USB EHCI support.   Chris Zhang
• [U-Boot] [PATCH 1/3] Fix EHCI port reset.   Chris Zhang
• [U-Boot] [PATCH 2/3] Add ppc440epx USB ehci support.   Chris Zhang
• [U-Boot] [PATCH 3/3] Adds EHCI definitions to sequoia board configuration file.   Chris Zhang
• [U-Boot] [PATCH 1/3] Monahan/PXA3xx: integrate Linux NAND controller driver   Marcel Ziswiler
• [U-Boot] [PATCH 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   Detlev Zundel
• [U-Boot] [PATCH 2/9] MX51: Add initial support for the Freescale MX51   Detlev Zundel
• [U-Boot] [PATCH 3/9] MX51: Add register definitions   Detlev Zundel
• [U-Boot] [PATCH 4/9] MX51: Add pin and multiplexer definitions.   Detlev Zundel
• [U-Boot] [PATCH 2/9] MX51: Add initial support for the Freescale MX51   Detlev Zundel
• [U-Boot] [PATCH 2/9] MX51: Add initial support for the Freescale MX51   Detlev Zundel
• [U-Boot] ppc: How to get uboot (relocated) start address in RAM   Detlev Zundel
• [U-Boot] [PATCH] PPC: Record uboot's relocated address in RAM and show in bdinfo.   Detlev Zundel
• [U-Boot] [PATCH] PPC: Record uboot's relocated address in RAM and show in bdinfo.   Detlev Zundel
• [U-Boot] NS16550 Register structure   Detlev Zundel
• [U-Boot] [PATCH V2] PPC: Record uboot's relocated address in RAM and show in bdinfo.   Detlev Zundel
• [U-Boot] Linux Kernel without Ethernet (missed MAC)   Detlev Zundel
• [U-Boot] [PATCH] mpc5xxx: Support CPU internal watchdog.   Detlev Zundel
• [U-Boot] U-Boot for LENO3 processor board   Detlev Zundel
• [U-Boot] [PATCH] mpc512x: Use in/out accessors for all registers   Detlev Zundel
• [U-Boot] [PATCH] mpc512x: Add display of reset status register   Detlev Zundel
• [U-Boot] [PATCH v2] mpc512x: Add display of reset status register   Detlev Zundel
• [U-Boot] Performance problems with gunzip   Detlev Zundel
• [U-Boot] Performance problems with gunzip   Detlev Zundel
• [U-Boot] Performance problems with gunzip   Detlev Zundel
• [U-Boot] bug in ubifs   tcremel at alphabot.fr
• [U-Boot] CFI not detecting S29 flash device on 405gp board   ame
• [U-Boot] [PATCH V2 1/9] mkimage: Add Freescale imx Boot Image support (imximage)   stefano at babic.homelinux.org
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   prakash bedge
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   prakash bedge
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   prakash bedge
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   prakash bedge
• [U-Boot] U-boot running on DDR fails to detect the CFI compliant flash   prakash bedge
• [U-Boot] Write opeartion on flash fails.   prakash bedge
• [U-Boot] U-Boot Crashes with Dumps   anup behare
• [U-Boot] U-Boot Crashes with Dumps   anup behare
• [U-Boot] [PATCH 5/8 V2 Part 2/3] add at91 SoC access with c structures   cyrus
• [U-Boot] [PATCH ARM] Update the s3c2410 nand driver from linux-2.6.31.5   kevin.morfitt at fearnside-systems.co.uk
• [U-Boot] u-boot fails to read from nand flash in omap3   fgd
• [U-Boot] u-boot fails to read from nand flash in omap3   fgd
• [U-Boot] U-Boot Crashes with Dumps   anupbehare at gmail.com
• [U-Boot] U-Boot Crashes with Dumps   anupbehare at gmail.com
• [U-Boot] U-Boot Crashes with Dumps   anupbehare at gmail.com
• [U-Boot] U-Boot Crashes with Dumps   anupbehare at gmail.com
• [U-Boot] U-Boot Crashes with Dumps   anupbehare at gmail.com
• [U-Boot] ELDK for P2020/P2010   vinay hegde
• [U-Boot] CONGRATULATION!!   antoaneta kioseva
• [U-Boot] loading uImage error, Verifying Checksum ... Bad Data CRC, for what?   linzhavon
• [U-Boot] [U-Boot-Users] some flow about uboot   loody
• [U-Boot] Microblaze fix   monstr at monstr.eu
• [U-Boot] [PATCH 1/2] microblaze: Remove getenv_IPaddr   monstr at monstr.eu
• [U-Boot] [PATCH 2/2] microblaze: zlib needs asm/unaligned.h   monstr at monstr.eu
• [U-Boot] ARM GLOBAL_DATA_PTR gd issue   pawan
• [U-Boot] UART loadb problem in u-boot   prathika
• [U-Boot] [PATCH V3] PPC: Record uboot's relocated address in RAM and show in bdinfo.   richardretanubun at ruggedcom.com
• [U-Boot] [PATCH 0/3] Add Support for AM3517EVM with EMIF4   hvaibhav at ti.com
• [U-Boot] [PATCH 1/3] OMAP3: Consolidate SDRC related operations   hvaibhav at ti.com
• [U-Boot] [PATCH 2/3] AM35x: Add support for AM3517EVM   hvaibhav at ti.com
• [U-Boot] [PATCH 3/3] AM35x: Add support for EMIF4   hvaibhav at ti.com
• [U-Boot] Please pull u-boot-ti/master   s-paulraj at ti.com
• [U-Boot] Please pull u-boot-ti master   s-paulraj at ti.com

Last message date: Sun Jan 31 23:25:45 CET 2010
Archived on: Sun Jan 31 23:25:56 CET 2010

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...