[U-Boot] U-Boot Crashes with Dumps

[Stefan Roese]

On Tuesday 12 January 2010 11:07:13 anupbehare at gmail.com wrote:
> I am using PPC440GX and DIMM SDRAM.

OK, so you are using the code cpu/ppc4xx/44x_spd_ddr.c to configure the SDRAM 
controller. You should enable DEBUG in this code to see a bit more about the 
configuration.

BTW: I suggest you take a look at the ocotea SDRAM config options set in 
include/configs/ocotea.h. You should for example set CONFIG_PROG_SDRAM_TLB and 
then remove the SDRAM TLB entries from your init.S.
 
Cheers,
Stefan

--
DENX Software Engineering GmbH,      MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich,  Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de