[U-Boot] [PATCH v2] 85xx/p1_p2_rdb: p1020: add muxed usb2handling
Harninder Rai
harninder.rai at freescale.com
Thu Jan 28 07:13:10 CET 2010
This patch adds the 2nd USB (muxed with eLBC) node
depending upon enabling the 'usb2' environment variable
via hwconfig i.e. "setenv hwconfig usb2", so that linux
has the 2nd USB controller enabled, which will lead to
the disabling of the eLBC (NAND, NOR etc).
Also the 2nd USB controller has been left disabled in
the u-boot, otherwise any changes in the environment
won't be saved. Enabled agent mode support in USB2
depending upon "setenv hwconfig usb2:dr_mode=peripheral"
Updated copyright year too.
Signed-off-by: Vivek Mahajan <vivek.mahajan at freescale.com>
Signed-off-by: Harninder Rai <harninder.rai at freescale.com>
---
- Incorporated Kumar's comments
- Applies to git://git.denx.de/u-boot-mpc85xx.git
board/freescale/p1_p2_rdb/p1_p2_rdb.c | 126 ++++++++++++++++++++++++++++++++-
cpu/mpc85xx/fdt.c | 2 +-
include/asm-ppc/immap_85xx.h | 4 +-
3 files changed, 129 insertions(+), 3 deletions(-)
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index 3af660e..0b370ad 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-10 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -21,6 +21,7 @@
*/
#include <common.h>
+#include <hwconfig.h>
#include <command.h>
#include <asm/processor.h>
#include <asm/mmu.h>
@@ -41,6 +42,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define SGMII_PHY_RST_SET 0x00020000
#define PCIE_RST_SET 0x00010000
#define RGMII_PHY_RST_SET 0x02000000
+#define USB2_PORT_OUT_EN 0x01000000
#define USB_RST_CLR 0x04000000
@@ -198,10 +200,116 @@ int board_eth_init(bd_t *bis)
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
+void fdt_fixup_add_2nd_usb(void *blob, int agent)
+{
+ const char *soc_compat = "fsl,p1020-immr";
+ const char *lbc_compat = "fsl,p1020-elbc";
+ const u32 *addrcell, *sizecell, *ph;
+ int off, lbcoff, len, err;
+ u32 *regbuf = NULL;
+ u32 *irqbuf = NULL;
+
+ off = fdt_node_offset_by_compatible(blob, -1, soc_compat);
+ if (off < 0) {
+ printf("WARNING: could not find compatible node %s: %s.\n",
+ soc_compat, fdt_strerror(off));
+ return;
+ }
+
+ lbcoff = fdt_node_offset_by_compatible(blob, -1, lbc_compat);
+ if (lbcoff < 0) {
+ printf("WARNING: could not find compatible node %s: %s.\n",
+ lbc_compat, fdt_strerror(lbcoff));
+ return;
+ }
+
+ addrcell = fdt_getprop(blob, off, "#address-cells", NULL);
+ sizecell = fdt_getprop(blob, off, "#size-cells", NULL);
+
+ off = fdt_add_subnode(blob, off, "usb at 23000");
+ if (off < 0) {
+ printf("WARNING: could not add 2nd usb node %s.\n",
+ fdt_strerror(off));
+ return;
+ }
+
+ err = fdt_setprop_cell(blob, off, "#address-cells", 1);
+ if (err < 0)
+ printf("WARNING: could not set #address-cell property: %s\n",
+ fdt_strerror(err));
+
+ err = fdt_setprop_cell(blob, off, "#size-cells", 0);
+ if (err < 0)
+ printf("WARNING: could not set #size-cells property: %s\n",
+ fdt_strerror(err));
+
+ err = fdt_setprop_string(blob, off, "compatible", "fsl-usb2-dr");
+ if (err < 0)
+ printf("WARNING: could not set compatible property: %s\n",
+ fdt_strerror(err));
+
+ err = fdt_setprop_string(blob, off, "phy_type", "ulpi");
+ if (err < 0)
+ printf("WARNING: could not set phy_type property: %s\n",
+ fdt_strerror(err));
+
+ if (agent) {
+ err = fdt_setprop_string(blob, off, "dr_mode", "peripheral");
+ if (err < 0)
+ printf("WARNING: could not set dr_mode property: %s\n",
+ fdt_strerror(err));
+ }
+
+ if (addrcell && *addrcell == 2) {
+ regbuf[0] = 0;
+ regbuf[1] = CONFIG_SYS_MPC85xx_USB2_OFFSET;
+ len = 2;
+ } else {
+ regbuf[0] = CONFIG_SYS_MPC85xx_USB2_OFFSET;
+ len = 1;
+ }
+
+ if (sizecell && *sizecell == 2) {
+ regbuf[len] = 0;
+ regbuf[len + 1] = 0x1000;
+ len += 2;
+ } else {
+ regbuf[len] = 0x1000;
+ len++;
+ }
+
+ err = fdt_setprop(blob, off, "reg", regbuf, len * sizeof(u32));
+ if (err < 0)
+ printf("WARNING: could not set <%s> %s\n",
+ "reg", fdt_strerror(err));
+
+ irqbuf[0] = 0x2e;
+ irqbuf[1] = 0x2;
+
+ err = fdt_setprop(blob, off, "interrupts", irqbuf, 2 * sizeof(u32));
+ if (err < 0)
+ printf("WARNING: could not set %s %s\n",
+ "interrupts", fdt_strerror(err));
+
+ ph = fdt_getprop(blob, lbcoff, "interrupt-parent", 0);
+ if (!ph) {
+ printf("WARNING: could not read interrupt-parent property\n");
+ return;
+ }
+
+ err = fdt_setprop(blob, off, "interrupt-parent", ph, sizeof(u32));
+ if (err < 0)
+ printf("WARNING: could not set %s %s\n",
+ "interrupt-parent", fdt_strerror(err));
+}
+
void ft_board_setup(void *blob, bd_t *bd)
{
+ volatile ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ volatile ccsr_gpio_t *gpio = (void *)CONFIG_SYS_MPC85xx_GPIO_ADDR;
phys_addr_t base;
phys_size_t size;
+ int agent;
ft_cpu_setup(blob, bd);
@@ -209,6 +317,22 @@ void ft_board_setup(void *blob, bd_t *bd)
size = getenv_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+ if (!hwconfig("usb2"))
+ return;
+
+ agent = hwconfig_subarg_cmp("usb2", "dr_mode", "peripheral");
+
+ /*
+ * Add the 2nd usb node and enable it. eLBC will
+ * now be disabled since it is MUXed with USB2
+ */
+
+ fdt_fixup_add_2nd_usb(blob, agent);
+
+ setbits_be32(&gpio->gpdir, USB2_PORT_OUT_EN);
+ setbits_be32(&gpio->gpdat, USB2_PORT_OUT_EN);
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_ELBC_OFF_USB2_ON);
}
#endif
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index 1d11ab4..681dd6c 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd at denx.de.
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index 957ad76..8a79698 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1,7 +1,7 @@
/*
* MPC85xx Internal Memory Map
*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
*
* Copyright(c) 2002,2003 Motorola Inc.
* Xianghua Xiao (x.xiao at motorola.com)
@@ -1880,6 +1880,7 @@ typedef struct ccsr_gur {
#define MPC85xx_PMUXCR_SD_DATA 0x80000000
#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
+#define MPC85xx_PMUXCR_ELBC_OFF_USB2_ON 0x01000000
u8 res6[12];
u32 devdisr; /* Device disable control */
#define MPC85xx_DEVDISR_PCI1 0x80000000
@@ -2032,6 +2033,7 @@ enum {
#define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000
#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000
#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000
+#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000
#ifdef CONFIG_TSECV2
#define CONFIG_SYS_TSEC1_OFFSET 0xB0000
#else
--
1.6.5.6
More information about the U-Boot
mailing list