[U-Boot] [STATUS] Patch status update

[Wolfgang Denk]

Dear John,

In message <4b73d43f1001251513o16380ef6yaf5e14f17dd4c478 at mail.gmail.com> you wrote:
> --000e0cd1b36ebb16c2047e055293
> Content-Type: text/plain; charset=ISO-8859-1
> 
>  6590  01/16 John Rigby         [U-Boot] [PATCH-V2 1/9] mxc_serial replace
> > platform specific clock
> >             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73736
> 
> I got no feedback on this.
> 
> >
> >  6591  01/16 John Rigby         [U-Boot] [PATCH-V2 2/9] arm926ejs: add
> > nand_spl boot support
> >             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73737
> 
> Nor this.
> 
> >
> >  6592  01/16 John Rigby         [PATCH-V2 3/9] Add MX25 support to nand_spl
> > fsl nfc driver
> >             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73738
> >  6593  01/16 John Rigby         [U-Boot] [PATCH-V2 4/9] Nand mxc_nand add
> > v1.1 controller support
> >             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73739
> 
> Scott and Magnus had some comments on this which I thought I addressed.  I
> believe Scott asked Magnus to test the patch which he did.  Scott, are you
> waiting on an update from me on this?
> 
> >
> >  6594  01/16 John Rigby         [U-Boot] [PATCH-V2 5/9] fec_mxc: cleanup
> > and factor out MX27 dependencies
> >             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73740
> 
> I heard nothing on this.
> 
> >
> >  6595  01/16 John Rigby         [U-Boot] [PATCH-V2 6/9] Add support for
> > Freescale MX25 SOC
> >             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73744
> 
> Nor this.
> 
> >
> >  6596  01/16 John Rigby         [U-Boot] [PATCH-V2 7/9] fec_mxc: add MX25
> > support
> >             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73741
> 
> Nor this.
> 
> >
> >  6597  01/16 John Rigby         [PATCH-V2 8/9] env_nand.c: print error
> > message and fail gracefully
> >             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73743
> 
> Ditto.
> 
> >
> >  6598  01/16 John Rigby         [PATCH-V2 9/9] Add support for KARO TX25
> > board
> >             http://article.gmane.org/gmane.comp.boot-loaders.u-boot/73742
> 
> Again, nothing.

Thanks.


Feng??? I hyaven't hear=d from you for a while, so I assume you do not
have any time available for custodian work?


Tom, as it seems Feng disappeared in a black hole, can you please take
care of this stuff, then?  [Ditto for Stefano's i.MX51 code, please.]

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"No matter where you go, there you are..."          - Buckaroo Banzai