[U-Boot] [PATCH v2] at91: Add esd gmbh OTC570 board support

[Tom]

Daniel Gorsulowski wrote:
> This patch adds support for esd gmbh OTC570 board.
> The OTC570 is based on an Atmel AT91SAM9263 SoC.
> 
> Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski at esd.eu>
> ---
> v2: Applyed suggestions according to
>     http://lists.denx.de/pipermail/u-boot/2010-January/066948.html
>     - removed video commands they should go into common
>     - swapped copyright places
>     - removed some #ifdef / #ifndef
>     - converted element initializations in panel_info
>     - replaced some puts() with printf()
>     - moved CONFIG_SYS_HZ below board and cpu defines
> 
>  MAINTAINERS                  |    1 +
>  MAKEALL                      |    1 +
>  Makefile                     |    3 +
>  board/esd/otc570/Makefile    |   55 +++++++
>  board/esd/otc570/config.mk   |    1 +
>  board/esd/otc570/otc570.c    |  365 ++++++++++++++++++++++++++++++++++++++++++
>  board/esd/otc570/partition.c |   37 +++++
>  include/configs/otc570.h     |  246 ++++++++++++++++++++++++++++
>  tools/Makefile               |    3 +
>  tools/logos/esd.bmp          |  Bin 0 -> 35078 bytes
>  10 files changed, 712 insertions(+), 0 deletions(-)
>  create mode 100644 board/esd/otc570/Makefile
>  create mode 100644 board/esd/otc570/config.mk
>  create mode 100644 board/esd/otc570/otc570.c
>  create mode 100644 board/esd/otc570/partition.c
>  create mode 100644 include/configs/otc570.h
>  create mode 100644 tools/logos/esd.bmp
> 
Applied
Thanks,
Tom