[U-Boot] [PATCH v2] at91: Add esd gmbh OTC570 board support
Daniel Gorsulowski
Daniel.Gorsulowski at esd.eu
Mon Jan 25 10:50:41 CET 2010
This patch adds support for esd gmbh OTC570 board.
The OTC570 is based on an Atmel AT91SAM9263 SoC.
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski at esd.eu>
---
v2: Applyed suggestions according to
http://lists.denx.de/pipermail/u-boot/2010-January/066948.html
- removed video commands they should go into common
- swapped copyright places
- removed some #ifdef / #ifndef
- converted element initializations in panel_info
- replaced some puts() with printf()
- moved CONFIG_SYS_HZ below board and cpu defines
MAINTAINERS | 1 +
MAKEALL | 1 +
Makefile | 3 +
board/esd/otc570/Makefile | 55 +++++++
board/esd/otc570/config.mk | 1 +
board/esd/otc570/otc570.c | 365 ++++++++++++++++++++++++++++++++++++++++++
board/esd/otc570/partition.c | 37 +++++
include/configs/otc570.h | 246 ++++++++++++++++++++++++++++
tools/Makefile | 3 +
tools/logos/esd.bmp | Bin 0 -> 35078 bytes
10 files changed, 712 insertions(+), 0 deletions(-)
create mode 100644 board/esd/otc570/Makefile
create mode 100644 board/esd/otc570/config.mk
create mode 100644 board/esd/otc570/otc570.c
create mode 100644 board/esd/otc570/partition.c
create mode 100644 include/configs/otc570.h
create mode 100644 tools/logos/esd.bmp
diff --git a/MAINTAINERS b/MAINTAINERS
index e8ba4bc..0c2b1b1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -574,6 +574,7 @@ Peter Figuli <peposh at etc.sk>
Daniel Gorsulowski <daniel.gorsulowski at esd.eu>
meesc ARM926EJS (AT91SAM9263 SoC)
+ otc570 ARM926EJS (AT91SAM9263 SoC)
Sedji Gaouaou<sedji.gaouaou at atmel.com>
at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC)
diff --git a/MAKEALL b/MAKEALL
index dd635bd..eefd3dd 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -654,6 +654,7 @@ LIST_at91=" \
meesc \
mp2usb \
m501sk \
+ otc570 \
pm9261 \
pm9263 \
SBC35_A9G20 \
diff --git a/Makefile b/Makefile
index 1ab197b..5fda1b9 100644
--- a/Makefile
+++ b/Makefile
@@ -2862,6 +2862,9 @@ at91sam9g45ekes_config : unconfig
fi;
@$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
+otc570_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs otc570 esd at91
+
pm9263_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91
diff --git a/board/esd/otc570/Makefile b/board/esd/otc570/Makefile
new file mode 100644
index 0000000..755c5ee
--- /dev/null
+++ b/board/esd/otc570/Makefile
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop at leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS-y += $(BOARD).o
+COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/esd/otc570/config.mk b/board/esd/otc570/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/esd/otc570/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/esd/otc570/otc570.c b/board/esd/otc570/otc570.c
new file mode 100644
index 0000000..056df37
--- /dev/null
+++ b/board/esd/otc570/otc570.c
@@ -0,0 +1,365 @@
+/*
+ * (C) Copyright 2010
+ * Daniel Gorsulowski <daniel.gorsulowski at esd.eu>
+ * esd electronic system design gmbh <www.esd.eu>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam9_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/io.h>
+#include <atmel_lcdc.h>
+#include <lcd.h>
+#include <netdev.h>
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static int hw_rev = -1; /* hardware revision */
+
+int get_hw_rev(void)
+{
+ if (hw_rev >= 0)
+ return hw_rev;
+
+ hw_rev = at91_get_gpio_value(AT91_PIN_PB19);
+ hw_rev |= at91_get_gpio_value(AT91_PIN_PB20) << 1;
+ hw_rev |= at91_get_gpio_value(AT91_PIN_PB21) << 2;
+ hw_rev |= at91_get_gpio_value(AT91_PIN_PB22) << 3;
+
+ if (hw_rev == 15)
+ hw_rev = 0;
+
+ return hw_rev;
+}
+
+#ifdef CONFIG_CMD_NAND
+static void otc570_nand_hw_init(void)
+{
+ unsigned long csa;
+
+ /* Enable CS3 */
+ csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+ at91_sys_write(AT91_MATRIX_EBI0CSA,
+ csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ at91_sys_write(AT91_SMC_SETUP(3),
+ AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC_PULSE(3),
+ AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+ AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+ at91_sys_write(AT91_SMC_CYCLE(3),
+ AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+ at91_sys_write(AT91_SMC_MODE(3),
+ AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+ AT91_SMC_EXNWMODE_DISABLE |
+ AT91_SMC_DBW_8 |
+ AT91_SMC_TDF_(2));
+
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+}
+#endif /* CONFIG_CMD_NAND */
+
+#ifdef CONFIG_MACB
+static void otc570_macb_hw_init(void)
+{
+ /* Enable clock */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+ at91_macb_hw_init();
+}
+#endif
+
+/*
+ * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT
+ * controller debugging
+ * The ET1100 is located at physical address 0x70000000
+ * Its process memory is located at physical address 0x70001000
+ */
+static void otc570_ethercat_hw_init(void)
+{
+ /* Configure SMC EBI1_CS0 for EtherCAT */
+ at91_sys_write(AT91_SMC1_SETUP(0),
+ AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+ AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+ at91_sys_write(AT91_SMC1_PULSE(0),
+ AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(9) |
+ AT91_SMC_NRDPULSE_(5) | AT91_SMC_NCS_RDPULSE_(9));
+ at91_sys_write(AT91_SMC1_CYCLE(0),
+ AT91_SMC_NWECYCLE_(10) | AT91_SMC_NRDCYCLE_(6));
+ /*
+ * Configure behavior at external wait signal, byte-select mode, 16 bit
+ * data bus width, none data float wait states and TDF optimization
+ */
+ at91_sys_write(AT91_SMC1_MODE(0),
+ AT91_SMC_READMODE | AT91_SMC_EXNWMODE_READY |
+ AT91_SMC_BAT_SELECT | AT91_SMC_DBW_16 | AT91_SMC_TDF_(0) |
+ AT91_SMC_TDFMODE);
+
+ /* Configure RDY/BSY */
+ at91_set_B_periph(AT91_PIN_PE20, 0); /* EBI1_NWAIT */
+}
+
+#ifdef CONFIG_LCD
+/* Number of columns and rows, pixel clock in Hz and hsync/vsync polarity */
+vidinfo_t panel_info = {
+ .vl_col = 640,
+ .vl_row = 480,
+ .vl_clk = 25175000,
+ .vl_sync = ATMEL_LCDC_INVLINE_INVERTED |
+ ATMEL_LCDC_INVFRAME_INVERTED,
+
+ .vl_bpix = 3, /* Bits per pixel, 0 = 1bit, 3 = 8bit */
+ .vl_tft = 1, /* 0 = passive, 1 = TFT */
+ .vl_vsync_len = 1, /* Length of vertical sync in NOL */
+ .vl_upper_margin = 35, /* Idle lines at the frame start */
+ .vl_lower_margin = 5, /* Idle lines at the end of the frame */
+ .vl_hsync_len = 5, /* Width of the LCDHSYNC pulse */
+ .vl_left_margin = 112, /* Idle cycles at the line beginning */
+ .vl_right_margin = 1, /* Idle cycles at the end of the line */
+
+ .mmio = AT91SAM9263_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */
+}
+
+void lcd_disable(void)
+{
+ at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */
+}
+
+static void otc570_lcd_hw_init(void)
+{
+ at91_set_A_periph(AT91_PIN_PC0, 0); /* LCDVSYNC */
+ at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
+ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
+ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
+ at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
+ at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
+ at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
+ at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
+ at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
+ at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
+ at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
+ at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
+ at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
+ at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
+ at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
+ at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
+ at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
+ at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
+ at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
+ at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
+ at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
+ at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
+ at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
+ at91_set_gpio_output(AT91_PIN_PA30, 1); /* PCI */
+
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+
+ gd->fb_base = CONFIG_OTC570_LCD_BASE;
+}
+
+#ifdef CONFIG_LCD_INFO
+void lcd_show_board_info(void)
+{
+ ulong dram_size, nand_size;
+ int i;
+ char temp[32];
+
+ dram_size = 0;
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+ dram_size += gd->bd->bi_dram[i].size;
+ nand_size = 0;
+ for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+ nand_size += nand_info[i].size;
+
+ lcd_printf("\n%s\n", U_BOOT_VERSION);
+ lcd_printf("%s CPU at %s MHz\n", AT91_CPU_NAME,
+ strmhz(temp, get_cpu_clk_rate()));
+ lcd_printf(" %ld MB SDRAM, %ld MB NAND\n",
+ dram_size >> 20,
+ nand_size >> 20 );
+ lcd_printf(" Board : esd ARM9 HMI Panel - OTC570\n");
+ lcd_printf(" Hardware-revision: 1.%d\n", get_hw_rev());
+ lcd_printf(" Mach-type : %lu\n", gd->bd->bi_arch_number);
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = get_ram_size((long *) PHYS_SDRAM, (1 << 27));
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0;
+#ifdef CONFIG_MACB
+ rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x00);
+#endif
+ return rc;
+}
+
+int checkboard(void)
+{
+ char str[32];
+
+ puts("Board: esd ARM9 HMI Panel - OTC570");
+ if (getenv_r("serial#", str, sizeof(str)) > 0) {
+ puts(", serial# ");
+ puts(str);
+ }
+ printf("\nHardware-revision: 1.%d\n", get_hw_rev());
+ printf("Mach-type: %lu\n", gd->bd->bi_arch_number);
+ return 0;
+}
+
+#ifdef CONFIG_SERIAL_TAG
+void get_board_serial(struct tag_serialnr *serialnr)
+{
+ char *str;
+
+ char *serial = getenv("serial#");
+ if (serial) {
+ str = strchr(serial, '_');
+ if (str && (strlen(str) >= 4)) {
+ serialnr->high = (*(str + 1) << 8) | *(str + 2);
+ serialnr->low = simple_strtoul(str + 3, NULL, 16);
+ }
+ } else {
+ serialnr->high = 0;
+ serialnr->low = 0;
+ }
+}
+#endif
+
+#ifdef CONFIG_REVISION_TAG
+u32 get_board_rev(void)
+{
+ return hw_rev | 0x100;
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+ char str[64];
+
+ at91_set_gpio_output(AT91_PIN_PA29, 1);
+ at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
+ at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0);
+ /* Set USART_MODE = 1 (RS485) */
+ at91_sys_write((0xFFF8C004 - AT91_BASE_SYS), 1);
+
+ printf("USART0: ");
+
+ if (getenv_r("usart0", str, sizeof(str)) == -1) {
+ printf("No entry - assuming 1-wire\n");
+ /* CTS pin, works as mode select pin (0 = 1-wire; 1 = RS485) */
+ at91_set_gpio_output(AT91_PIN_PA29, 0);
+ } else {
+ if (strcmp(str, "1-wire") == 0) {
+ printf("%s\n", str);
+ at91_set_gpio_output(AT91_PIN_PA29, 0);
+ } else if (strcmp(str, "rs485") == 0) {
+ printf("%s\n", str);
+ at91_set_gpio_output(AT91_PIN_PA29, 1);
+ } else {
+ printf("Wrong entry - assuming 1-wire ");
+ printf("(valid values are '1-wire' or 'rs485')\n");
+ at91_set_gpio_output(AT91_PIN_PA29, 0);
+ }
+ }
+ printf("Display memory address: 0x%08lX\n", gd->fb_base);
+
+ return 0;
+}
+#endif /* CONFIG_MISC_INIT_R */
+
+int board_init(void)
+{
+ /* Peripheral Clock Enable Register */
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA |
+ 1 << AT91SAM9263_ID_PIOB |
+ 1 << AT91SAM9263_ID_PIOCDE |
+ 1 << AT91SAM9263_ID_TWI |
+ 1 << AT91SAM9263_ID_SPI0 |
+ 1 << AT91SAM9263_ID_LCDC |
+ 1 << AT91SAM9263_ID_UHP);
+
+ /* arch number of OTC570-Board */
+ gd->bd->bi_arch_number = MACH_TYPE_OTC570;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ at91_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+ otc570_nand_hw_init();
+#endif
+ otc570_ethercat_hw_init();
+#ifdef CONFIG_HAS_DATAFLASH
+ at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_MACB
+ otc570_macb_hw_init();
+#endif
+#ifdef CONFIG_AT91_CAN
+ at91_can_hw_init();
+#endif
+#ifdef CONFIG_USB_OHCI_NEW
+ at91_uhp_hw_init();
+#endif
+#ifdef CONFIG_LCD
+ otc570_lcd_hw_init();
+#endif
+ return 0;
+}
diff --git a/board/esd/otc570/partition.c b/board/esd/otc570/partition.c
new file mode 100644
index 0000000..df0e1db
--- /dev/null
+++ b/board/esd/otc570/partition.c
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf at atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
+ {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+};
+
+/* define the area offsets */
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+ {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
+ {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+ {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
+};
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
new file mode 100644
index 0000000..bedaf13
--- /dev/null
+++ b/include/configs/otc570.h
@@ -0,0 +1,246 @@
+/*
+ * (C) Copyright 2010
+ * Daniel Gorsulowski <daniel.gorsulowski at esd.eu>
+ * esd electronic system design gmbh <www.esd.eu>
+ *
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop at leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * Configuation settings for the esd OTC570 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Common stuff */
+#define CONFIG_OTC570 1 /* Board is esd OTC570 */
+#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq */
+#define CONFIG_DISPLAY_BOARDINFO 1
+#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
+#define CONFIG_PREBOOT /* enable preboot variable */
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_SERIAL_TAG 1
+#define CONFIG_REVISION_TAG 1
+#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+#define CONFIG_ARCH_CPU_INIT
+
+/*
+ * Hardware drivers
+ */
+
+/* Console output */
+#define CONFIG_ATMEL_USART 1
+#undef CONFIG_USART0
+#undef CONFIG_USART1
+#undef CONFIG_USART2
+#define CONFIG_USART3 1 /* USART 3 is DBGU */
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK 1
+
+/* LCD */
+#define CONFIG_LCD 1
+#define LCD_BPP LCD_COLOR8
+
+#undef CONFIG_SPLASH_SCREEN
+
+#ifndef CONFIG_SPLASH_SCREEN
+#define CONFIG_LCD_LOGO 1
+#define CONFIG_LCD_INFO 1
+#undef CONFIG_LCD_INFO_BELOW_LOGO
+#endif /* CONFIG_SPLASH_SCREEN */
+
+#undef LCD_TEST_PATTERN
+#define CONFIG_SYS_WHITE_ON_BLACK 1
+#define CONFIG_ATMEL_LCD 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+#define CONFIG_OTC570_LCD_BASE 0x23E00000 /* LCD is in SDRAM */
+#define CONFIG_CMD_BMP 1
+
+/* RTC and I2C stuff */
+#define CONFIG_RTC_DS1338 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#undef CONFIG_HARD_I2C
+#define CONFIG_SOFT_I2C 1
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+
+#ifdef CONFIG_SOFT_I2C
+#define CONFIG_I2C_CMD_TREE 1
+#define CONFIG_I2C_MULTI_BUS 1
+/* Enable peripheral clock and configure data and clock pins for pio */
+#define I2C_INIT { \
+ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | \
+ 1 << AT91SAM9263_ID_PIOCDE); \
+ at91_set_gpio_output(AT91_PIN_PB4, 0); \
+ at91_set_gpio_output(AT91_PIN_PB5, 0); \
+}
+/* Configure data pin as output */
+#define I2C_ACTIVE at91_set_gpio_output(AT91_PIN_PB4, 0)
+/* Configure data pin as input */
+#define I2C_TRISTATE at91_set_gpio_input(AT91_PIN_PB4, 0)
+/* Read data pin */
+#define I2C_READ at91_get_gpio_value(AT91_PIN_PB4)
+/* Set data pin */
+#define I2C_SDA(bit) at91_set_gpio_value(AT91_PIN_PB4, bit)
+/* Set clock pin */
+#define I2C_SCL(bit) at91_set_gpio_value(AT91_PIN_PB5, bit)
+#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE 1
+#define CONFIG_BOOTP_BOOTPATH 1
+#define CONFIG_BOOTP_GATEWAY 1
+#define CONFIG_BOOTP_HOSTNAME 1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_CMD_PING 1
+#define CONFIG_CMD_DHCP 1
+#define CONFIG_CMD_NAND 1
+#define CONFIG_CMD_USB 1
+#define CONFIG_CMD_I2C 1
+#define CONFIG_CMD_DATE 1
+
+/* LED */
+#define CONFIG_AT91_LED 1
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x20000000
+
+/* DataFlash */
+#define CONFIG_ATMEL_DATAFLASH_SPI
+#define CONFIG_HAS_DATAFLASH 1
+#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
+#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+#define AT91_SPI_CLK 15000000
+#define DATAFLASH_TCSS (0x1a << 16)
+#define DATAFLASH_TCHS (0x1 << 24)
+
+/* NOR flash is not populated, disable it */
+#define CONFIG_SYS_NO_FLASH 1
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_DBW_8 1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB 1
+#define CONFIG_RMII 1
+#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_RETRY_COUNT 20
+#undef CONFIG_RESET_PHY_R
+
+/* USB */
+#define CONFIG_USB_ATMEL
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_CMD_FAT 1
+
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END 0x23e00000
+
+#define CONFIG_SYS_USE_DATAFLASH 1
+#undef CONFIG_SYS_USE_NANDFLASH
+
+/* CAN */
+#define CONFIG_AT91_CAN 1
+
+/* hw-controller addresses */
+#define CONFIG_ET1100_BASE 0x70000000
+
+/* bootstrap + u-boot + env in dataflash on CS0 */
+#define CONFIG_ENV_IS_IN_DATAFLASH 1
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
+ 0x8400)
+#define CONFIG_ENV_OFFSET 0x4200
+#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
+ CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE 0x4200
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \
+ 128*1024, 0x1000)
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */
+
+#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif
diff --git a/tools/Makefile b/tools/Makefile
index 5b8c3c3..c91e19d 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -102,6 +102,9 @@ endif
ifeq ($(VENDOR),atmel)
LOGO_BMP= logos/atmel.bmp
endif
+ifeq ($(VENDOR),esd)
+LOGO_BMP= logos/esd.bmp
+endif
ifeq ($(VENDOR),ronetix)
LOGO_BMP= logos/ronetix.bmp
endif
diff --git a/tools/logos/esd.bmp b/tools/logos/esd.bmp
new file mode 100644
index 0000000000000000000000000000000000000000..a6b403024fbd92952c6fac576d215b49afdb6626
GIT binary patch
literal 35078
zcmeHQy>BDO6<^6 at L|+U_;sGaGS5Q1L(1(GG1W9K|q-MoCRtC~s>DHx7mu}qzNSV at Y
zngA(Nx(!kV`H!66Z at zZke(#E+#S0&>+}WA;X5M at A=FRMUEZ_g>cYlsFyz4~KDMJ6o
z^><ubQBTMJ_opa2{=K;n$pj5d?crw+R}X<bTtnUwF~l|IHS9%axQ2Us(Qvqj=RG{{
zMVGvfamRJb>ufK2kLz|kM0kksF#3kq<uLk)>s#J$amV%Xa*Xg8;c at gGulM8Vdt5*8
z`i9q8^dqm2XVFi%{=)0qv*@q5e)@QcXI$T2;`uWAnfLE-$MrW}-(N=m!1YgDKYw?N
zI9%V~BJLJ(xPG{ee!=xGUO(PO|H1XkkM9wFkMR5G*I$3#TpJyH at -|>Rfc?F>zP{G3
zVi$o+pLB?)Q~h*~(9p-@!JzLW;LwrBjm7AWXEEU7m3 at ABuK29Zc5Oueg3l+tQ_vqE
zZi4&RAzu)AHtw3|-D~sI0m_+0DY|tZfP2T(Lj=^o;ho}XzR#yAqOV<a57DuHB6|GN
z!~-QZqV~WDc~K_M=r&f$2ofJ_+`*g}0EnX|h+;l7lMSQr1keRX=1Hl2sAgeM3V(M&
zrD7^;%nWRfQAAZ3hVL1o<_Hp9O-(F?)(Y#AkNHf2Q%(GqfyH#XU?EzNsm55$HOs8e
z&w(7HGl`-zBCDxRB16m-`q0mYMPe1e0gz*Lj?{@JJG6K=EKkwkh!86qouHrSc!T~L
z;d^2*@&-hM8CaS`ufT&55IiaBXdn0ZVkd%ip#bLE1<IUkzn~bSDC(ReNum3rfzCS7
z)+tfr*FY%&vJk8J7g0oVZ$Vo#W)@$8a<1d81zGf+D1xd{urat!AHYJ8!(1D8Kfb>h
zMaQ#yW!g}O5<x(%W6cgLoW(|@WqnLQY+B^){p|#~+yR4 at 7afyDlf=hd0JVbP7g2N>
z$E<W?=i9I**mm5Hdd$Qd9MES59el7^xc00w?}J<0l(tQ2TU{*{bPRyjZ*eoNT1(~{
zIFZRVBu#*o3%&r?V1Ozu0TeKM2~Im~&tq_`?IZdOlm|BoS{NYi1ed8-px+&!9y(P0
z$fMf=hA8>^)zE>iA`FKPFIlIGwnApD^P?j(m1U?uAnCx74uM1)Hug+k;4Hg97SzI3
z1m(YFI~dSoXqUxW=tHbU7kQ{I_%M1#EnL!Y&!R>AunXeE!=V7m5r9@^SNmDoK0N^_
z;v>V#2*mG9Q2#;>Nao-H^@!S?n;Jssfi_qS;OQI&sN&v2&3Ctvjdoe&s2d^ca~S6|
zIz<UujT(Id^!{AU`yGdF^EckiumTF^bjW5#4i`s6qBF5w0jwatx8}zr*h3%(ESfQ~
zaU`t9&<2Sw0j#1e-NS;k at N^?21^4Q+=qOhAZ&_h|MAIx#3q+ at K1-i=<#l_<T!U!3_
z6t>`l2^U9f%4pPlFxUeIg9dR%$zN&WuaSbr^c7<0N#O?(vJKA=r+;@)V-VE%T)3M3
z2V+4nhS_%11;dcwt+8tu+!q49gT~_w&SZQE{1Y7{!*^&Kq`xsr)$x=I&J{qTw?X~<
z3W6(BKQ~B$gy71WGt5J~ZH<`s!?uJ{x(j3<&!IDN0t>?L4El%G0pLt~Ez<yi-ead6
z&ynF30<Mq5;~{u4j^ay0M{$fIkH@;%!wFfANNW9&=4=}h8#CIvM^At_GG{twZLr$&
zY1Hh`7^v(Tbg#BRfbI#jV3Z at KEtaJ_;%ijRYwgMDX#;du6k-8aK%c at S1|)<^w?U at J
z05tmW0X4eCD!$u|y4n*v8`HG(gEWo~Oqn(i?ND9X9=qU5eXg<cf0!FP(;l<`KpZkK
zU?;0berPqu!LVkp(fJwl9inSb$h#kufd at DO6{FDsLAxvTu4;Y<@rX#P(aj>B!$6rw
z*g()pA`0$?!!NCTA{Z~tkTFN{m<4NzW;~@Cdj$$bbI@$SE!oPZ^BA%dMqh5wb(JS|
zZ!+JWYW_fFZJqtT2BkD5YDPz>cmSD0ql}_AIti+un-)d0X2lo-FnyvaCjEOkolbSz
z>LFmd%qxUWaGCMx8A4j$Lj-P-W(=0-CSRflEhLJ*yj;xZb9Id7rQzT!Xn#JxKXJZk
z_Z$d|i+;p0+#A8s?ui2G;w?=CaDcqcP;}r!CS^6hy}oRd-Tvps?YiQ7y3JGF#;>|~
z+&g_IZxH#sgY0Zg^*(PtE4f3jYKF&^n9my_8F)NzKC8H+*UvPNDxznYKEeco at vF~}
zxeZGj4Qw>9(ZEIn8x3qUu+hLq19=+gA5PA%G1>H?6(}{mIzPrzb^#0*IoT>TyFQ;B
z>Q}`Ax at OVaFHSh)fkE{nVLlrdh=Mn$VmNtWrsJA%oxwi6hX_lMLT938n32i?=c@~V
zg)1{DnWd{8)5E*XQe;TDoK4)+Ny5drybPqC7Sv>tM at gtNS?JlZgo)*Z%w$?nu$hf3
z&-}Qxb-ltASb5%UQ)gxl&P&3H&PoU;Dm`V502WLu^KOkGC*1VHR8?Net{2u|JwVyv
zH06^4R!l at I8PzEXi`Q~OFJQMQ$SK{Y1-sa880ge2>%O5N`<UadnRRQlX}}W}w(Ehi
zbG=3Sm+`w#*)$x(Y8uS)a;2mWs1FS~_+C!``UKUZ+- at 2ukt;|Z%F0sVVyM)9<_U`y
zK2IN5TunyFdUmtW(aGJyEY$eybRbzU*ZTl`qFy*3O|GENEGJm0tOq%xgqumQ%2Y3x
zG}gf>H+Kk7Zt)zroZNLV_qH=Q$q at OK>U06=XU^YCn2GHcY5e-nW2{)poD+`q8ly{`
z1bH6n9Y!t%cU8Ki<|(-rD?zL;dAv4(?J*bTLh#Grq4w-<8e78FC?!2t;;X^zSaW4z
zeKK&5)znoOyXm&)#=pIg+0=5*i|a5EtR?NLusm+kNdTK-3Nc$INS+k-dl(QE<r|1i
zOcALUm4&}cgkZ?2tCFrhg5KGclwuZ8%_a&To6(+M=QSwa9E*y55vqlo*q#8SKjgLv
z!V5110@)T|_6b=W^-$$L1$wwo!W6cY-_#()R>-y(nq*#^WU}6RSi+2OR(8W<33|(<
zUf2eGul_DH1-o%DC_u0#c5nnpE+~cvaaH9xs>b(8XhX5x5*GF#d2i%ldR4;}rdz|i
zHI~2-aD!R`c5PF5%4`FPBvHyWrx*z<ys|B&Xq!Ch-BwPLd;3Zi+EvogC)ti10q%C|
zOp+)<VW(QY<4lk>f6!af99w!{F!B&Ruye;j-hxQ)O9~Q2kQ<RaWM(x4>LVYxRmg*F
zhetjF`pz?I?o0HLBdF(z`<6VUU7y}*$IVcL;H?yU%36Rg1_8?wx4C)9v;Vs0A|1Pz
z&IR;tKUYvPb7S{Tx`Y;Yx0MRhuL-2pNG_7p(yjX3Htpf9W8dG!yQi;KDZD3d5^&Cm
z8#6p)h9=-6w3m`CHTryj%jn4S?*hWf_<9$@JK{!nwXh|KX+<ZTE1h>S+DMNj6GZMq
z^pNcYd78sP;`fB`F1gv=4Y9(kl=ET<dptZ4K$by=D&)v+yx!)_y94Fa5f<(e8{WN%
zgiS4P8k8HkJruvBipjUnoOH=uG!QqlxePg+(-3x(GuHlt7XpFe*Hlp-PTz?ba^t;g
zAj^=$y-RVssfU~fBI+YMlys~LIr7ZUmw}GT8N)K<u&*G(u_}AGz%j>r&Gx}#9v<@E
z1bKqQgWaaSM1N)Wq5A@|9Ef3Tj=@-&1xv1T3iTm|&Zj0tzTkK!ngpDQre1Ep3X9fZ
zG0EjCF at qL%Y092w5J<v)-K=KlWSVfF;J)>RaQn80L_C-7lMwjeB6IFxe;Ma(gb&B{
zbDM#1GP8Frz#LLycAbzOr_&^iLOJpVk`CP*jIh|&{#}~B3j?(~<-=jB-G44<miHju
z;IpkKDM(anFr at VuVrXI~UvOM10q4a$#S#Ph6ofCTxS69!kHtXF3y2t+xEcJg^(}wi
zE>T4IR-cTElJp>?Pv$ydawfZY5XFNV0foI&`FWq9q~<|6VUlMpNuDFmBm+4WB8Dcm
z1>xjOKxW->lIOBQq7$?y*NXBMJ$f?tnxKnUGIK&iTB9mG at RMZJI5Y^GVda#&6gtPU
z0?q4_VB|-5tS37AkQ)9})q2>FVJ`NNVxT-RL12f at Vj@F5$zJ=8a3(l(8L*Ta6nwhl
ze*vZ#nz*60m}jZI at D=1*72FmhJ9kW~j7rSCqDGQ2gP{tCCduSX*wAx`$_lKLhA~`N
zLhid_I-k?91%TXqe<8sVYtk;7M{*O$5;?qf_hC5y!D6af2a6Fdi$wF+Vxd<IO}u9o
zLk3bwqIUcns at _>@QL$zpH3<7UaD?4U;ZREqP5j^<-&GKR$FhTp4dfCH(v(sBMl147
zwOZ27&b{VCjulVc8W;;P^uz4pwR>T8SPk#pBOLHeX~<7MR_7&G6)l5{yR+l*(b19E
zgJ%wm>Ks$ceuiqUE>4a?)Er)qC+9PMI3NQ#omzoN9U4<T2&y=}qFgV7##rS8D=Cp!
z%q}e{aLb*vS1BcInW$!sOtptk0 at NyL5h_5uPSzrCjFjHl7#5!w-pOfSxrOeB)Hk*5
zF*mQONOKB4EU-GfEf!6ROOUUZPr5g=<;acS!KeiFN2!ugeHT%gcLqV~Ocq at 7)R&{0
zOtv~AJ$u=$S&#X-mBsQ)LG57cDA$3@!bAgMIT%USs7RSfji=)2^%}x;`Q?)GLb7AF
zt)n^>S)Qv%#kVfTVvJXV^9;%{y=k#5;$t?R_>dndC?*nImOn6`@QWwDh~|Or8*)^{
zm7D!Z<-2{zH at G6Aa^6Mi^zhMDk+9Yqygs?Wft(yDUXbq&%qgB6qB>FfIL at F^_nk1j
z32ij6(ZEIntJ1(1ht<$}oU$q*P)^>F2hpwI!B29mkgvu?WhRo+Qs4t%ev+ec?yDof
zrx~jtnB-U;UrkFAdw&WfdejiODMKys>r8d5MFXj}tE$b&Ej74gGQ9azLf#&jCA0D9
z>@xG^Ia0lObSW#ypoZsNiw44PP*%YT)cNQla%S)|Vy%Pc<;PB|U at Z(wEYaplq`rQ1
zt*;=1Pi1KGGPe$7WU&6S0?oE7VyDKm(ONW+8a>Foor+dVRqc84nb_5`)T*>PLz9+k
z39a~PO;lqm>RL1qv3Ei`D)&^j{k66JmQ7gQK+3l3FPoe8`H8Klt_D)~VCB1gK~GIt
zy-4SewLUc~kIKK!&}1EEe?FC=Nu3Wdt%c{U9=pf!IvAGRQk!yB_Oa0?e;(Cb+Y{Fq
zny91p*{_T;JX(`q8?jo822x{al6P`wWs0s_P at M*{4ljirv0pgfwASLI at 2QRIIg+f&
z&?JZRRFwYDp}L0pTj6~&Lz9Q<dET-!c)ykYGv!tfO;o(ZEkT*`mlZKewT8UMwHTUI
z+tsqp1T0JSx%s$1Gs~+77q=Eelj<I%^8Y$>6}0L|apJ_)K<d5 at Llge<U=^&#(4 at Mh
z*FO}pYHJG0t21j7pg-GSouP?8_w;O~z*holG?29znpAt<^%$De at w}BMZl8g{)tEJ@
xIFSAfgdhw2x8w>~hh3M?M4KBnHX7JyV55PJ2L3-ZkpAveD0Nv{h`0Li{{S%4%!vR1
literal 0
HcmV?d00001
--
1.6.1
More information about the U-Boot
mailing list