[U-Boot] [PATCH] PCIe, USB: Replace 'end point' references with 'endpoint'
Peter Tyser
ptyser at xes-inc.com
Thu Jan 7 00:41:17 CET 2010
When referring to PCIe and USB 'endpoint' is the standard naming
convention.
Signed-off-by: Peter Tyser <ptyser at xes-inc.com>
---
I could only take so much of seeing "End Point" on every bootup before
I cracked:)
board/amcc/yucca/yucca.c | 2 +-
board/atum8548/atum8548.c | 2 +-
board/freescale/mpc8536ds/mpc8536ds.c | 6 +++---
board/freescale/mpc8544ds/mpc8544ds.c | 6 +++---
board/freescale/mpc8548cds/mpc8548cds.c | 2 +-
board/freescale/mpc8568mds/mpc8568mds.c | 2 +-
board/freescale/mpc8569mds/mpc8569mds.c | 2 +-
board/freescale/mpc8572ds/mpc8572ds.c | 6 +++---
board/freescale/mpc8610hpcd/mpc8610hpcd.c | 4 ++--
board/freescale/p1_p2_rdb/pci.c | 4 ++--
board/freescale/p2020ds/p2020ds.c | 6 +++---
board/tqc/tqm85xx/tqm85xx.c | 2 +-
board/xes/common/fsl_8xxx_pci.c | 6 +++---
cpu/ppc4xx/4xx_pcie.c | 4 ++--
drivers/usb/musb/musb_core.h | 2 +-
include/usb/ehci-fsl.h | 24 ++++++++++++------------
16 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index 67a0167..8c65cfb 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -609,7 +609,7 @@ int board_pcie_card_present(int port)
/*
* For the given slot, set endpoint mode, send power to the slot,
* turn on the green LED and turn off the yellow LED, enable the
- * clock. In end point mode reset bit is read only.
+ * clock. In endpoint mode reset bit is read only.
*/
void board_pcie_setup_port(int port, int rootpoint)
{
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index a220ad4..1c73e60 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -208,7 +208,7 @@ pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE1 connected to slot as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index da72916..5f4c3bb 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -222,7 +222,7 @@ pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE3 connected to Slot3 as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
@@ -271,7 +271,7 @@ pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE1 connected to Slot1 as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
@@ -328,7 +328,7 @@ pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE2 connected to Slot 2 as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 244a197..53baf98 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -131,7 +131,7 @@ pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE3 connected to ULI as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
@@ -194,7 +194,7 @@ pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE1 connected to Slot2 as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
@@ -252,7 +252,7 @@ pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 73e7c21..3371c74 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -361,7 +361,7 @@ pci_init_board(void)
if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE connected to slot as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index e2dc69e..f3f263d 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -429,7 +429,7 @@ pci_init_board(void)
if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE connected to slot as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index cdd7813..7e7da6e 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -544,7 +544,7 @@ pci_init_board(void)
if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE connected to slot as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det) {
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 933dd12..74d7e95 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -196,7 +196,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
SET_STD_PCIE_INFO(pci_info[num], 3);
printf (" PCIE3 connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie3_hose, first_free_busno);
@@ -228,7 +228,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
SET_STD_PCIE_INFO(pci_info[num], 2);
printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
@@ -248,7 +248,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index f42c316..0306607 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -249,7 +249,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) {
printf(" PCIe 1 connected to Uli as %s (base address %x)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det)
pci->pme_msg_det = 0xffffffff;
@@ -298,7 +298,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)) {
printf(" PCI-Express 2 connected to slot as %s" \
" (base address %x)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
(uint)pci);
if (pci->pme_msg_det)
pci->pme_msg_det = 0xffffffff;
diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c
index 4c08f9e..dc94f43 100644
--- a/board/freescale/p1_p2_rdb/pci.c
+++ b/board/freescale/p1_p2_rdb/pci.c
@@ -68,7 +68,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 2);
printf(" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
@@ -87,7 +87,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
SET_STD_PCIE_INFO(pci_info[num], 1);
printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index e38c014..714a04d 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -224,7 +224,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
SET_STD_PCIE_INFO(pci_info[num], 2);
printf(" PCIE2 connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie2_hose, first_free_busno);
@@ -264,7 +264,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
SET_STD_PCIE_INFO(pci_info[num], 3);
printf(" PCIE3 connected to Slot 1 as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie3_hose, first_free_busno);
@@ -283,7 +283,7 @@ void pci_init_board(void)
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
SET_STD_PCIE_INFO(pci_info[num], 1);
printf(" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
+ pcie_ep ? "Endpoint" : "Root Complex",
pci_info[num].regs);
first_free_busno = fsl_pci_init_port(&pci_info[num++],
&pcie1_hose, first_free_busno);
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index 3931ec5..085f8d5 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -636,7 +636,7 @@ static inline void init_pcie1(void)
if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("PCIe: %s, base address %x",
- pcie_ep ? "End point" : "Root complex", (uint)pci);
+ pcie_ep ? "Endpoint" : "Root complex", (uint)pci);
if (pci->pme_msg_det) {
pci->pme_msg_det = 0xffffffff;
diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c
index a615820..3a81827 100644
--- a/board/xes/common/fsl_8xxx_pci.c
+++ b/board/xes/common/fsl_8xxx_pci.c
@@ -256,7 +256,7 @@ void pci_init_board(void)
if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
printf("\n PCIE1 connected as %s (x%d)",
- host ? "Root Complex" : "End Point", width);
+ host ? "Root Complex" : "Endpoint", width);
if (in_be32(&pci->pme_msg_det)) {
out_be32(&pci->pme_msg_det, 0xffffffff);
debug(" with errors. Clearing. Now 0x%08x",
@@ -305,7 +305,7 @@ void pci_init_board(void)
if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
printf("\n PCIE2 connected as %s (x%d)",
- host ? "Root Complex" : "End Point", width);
+ host ? "Root Complex" : "Endpoint", width);
if (in_be32(&pci->pme_msg_det)) {
out_be32(&pci->pme_msg_det, 0xffffffff);
debug(" with errors. Clearing. Now 0x%08x",
@@ -354,7 +354,7 @@ void pci_init_board(void)
if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
printf("\n PCIE3 connected as %s (x%d)",
- host ? "Root Complex" : "End Point", width);
+ host ? "Root Complex" : "Endpoint", width);
if (in_be32(&pci->pme_msg_det)) {
out_be32(&pci->pme_msg_det, 0xffffffff);
debug(" with errors. Clearing. Now 0x%08x",
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index d9605c3..f3b9214 100644
--- a/cpu/ppc4xx/4xx_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -924,7 +924,7 @@ static inline u64 ppc4xx_get_cfgaddr(int port)
}
/*
- * 4xx boards as end point and root point setup
+ * 4xx boards as endpoint and root point setup
* and
* testing inbound and out bound windows
*
@@ -940,7 +940,7 @@ static inline u64 ppc4xx_get_cfgaddr(int port)
*
* Once your board came up as root point , you can verify by reading
* /proc/bus/pci/devices. Where you can see the configuration registers
- * of end point device attached to the port.
+ * of endpoint device attached to the port.
*
* Enpoint cofiguration can be verified by connecting 4xx board to any
* host or another 4xx board. Then try to scan the device. In case of
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 15c7f49..0c02085 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -128,7 +128,7 @@ struct musb_regs {
u8 rxhubport;
} tar[16];
/*
- * end point registers
+ * endpoint registers
* ep0 elements are valid when array index is 0
* otherwise epN is valid
*/
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h
index 3b99456..f48945a 100644
--- a/include/usb/ehci-fsl.h
+++ b/include/usb/ehci-fsl.h
@@ -112,7 +112,7 @@ struct usb_ehci {
u32 perlistbase; /* 0x154 - Periodic List Base
- USB Device Address */
u32 ep_list_addr; /* 0x158 - Next Asynchronous List
- - End Point Address */
+ - Endpoint Address */
u8 res5[0x4];
u32 burstsize; /* 0x160 - Programmable Burst Size */
u32 txfilltuning; /* 0x164 - Host TT Transmit
@@ -124,17 +124,17 @@ struct usb_ehci {
u32 portsc; /* 0x184 - Port status/control */
u8 res8[0x20];
u32 usbmode; /* 0x1a8 - USB Device Mode */
- u32 epsetupstat; /* 0x1ac - End Point Setup Status */
- u32 epprime; /* 0x1b0 - End Point Init Status */
- u32 epflush; /* 0x1b4 - End Point De-initlialize */
- u32 epstatus; /* 0x1b8 - End Point Status */
- u32 epcomplete; /* 0x1bc - End Point Complete */
- u32 epctrl0; /* 0x1c0 - End Point Control 0 */
- u32 epctrl1; /* 0x1c4 - End Point Control 1 */
- u32 epctrl2; /* 0x1c8 - End Point Control 2 */
- u32 epctrl3; /* 0x1cc - End Point Control 3 */
- u32 epctrl4; /* 0x1d0 - End Point Control 4 */
- u32 epctrl5; /* 0x1d4 - End Point Control 5 */
+ u32 epsetupstat; /* 0x1ac - Endpoint Setup Status */
+ u32 epprime; /* 0x1b0 - Endpoint Init Status */
+ u32 epflush; /* 0x1b4 - Endpoint De-initlialize */
+ u32 epstatus; /* 0x1b8 - Endpoint Status */
+ u32 epcomplete; /* 0x1bc - Endpoint Complete */
+ u32 epctrl0; /* 0x1c0 - Endpoint Control 0 */
+ u32 epctrl1; /* 0x1c4 - Endpoint Control 1 */
+ u32 epctrl2; /* 0x1c8 - Endpoint Control 2 */
+ u32 epctrl3; /* 0x1cc - Endpoint Control 3 */
+ u32 epctrl4; /* 0x1d0 - Endpoint Control 4 */
+ u32 epctrl5; /* 0x1d4 - Endpoint Control 5 */
u8 res9[0x228];
u32 snoop1; /* 0x400 - Snoop 1 */
u32 snoop2; /* 0x404 - Snoop 2 */
--
1.6.2.1
More information about the U-Boot
mailing list