[U-Boot] [PATCH 02/32] Blackfin: update tiny board settings (voltage/default env)

Mike Frysinger vapier at gentoo.org
Sun Jan 17 15:38:53 CET 2010 

From: Harald Krapfenbauer <Harald.Krapfenbauer at bluetechnix.at>

The tinyboards like to run at a little lower voltage than the default, and
they prefer to boot over the network.  For the latter, extend the common
code a little to make this easier.

Also fix the cm-bf527 env sector size while we're in here to reflect the
flash that is actually in use.

Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer at bluetechnix.at>
Signed-off-by: Mike Frysinger <vapier at gentoo.org>
---
 include/configs/bfin_adi_common.h |    5 ++++-
 include/configs/cm-bf527.h        |    9 ++++++++-
 include/configs/cm-bf533.h        |    5 +++++
 include/configs/cm-bf537e.h       |    7 +++++++
 include/configs/cm-bf537u.h       |   13 ++++---------
 include/configs/cm-bf548.h        |    5 +++++
 include/configs/cm-bf561.h        |    7 ++++++-
 include/configs/tcm-bf537.h       |    7 +++++++
 8 files changed, 46 insertions(+), 12 deletions(-)

diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 0fbd8f4..3fc0fa0 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -127,6 +127,9 @@
 #ifndef CONFIG_BOOTARGS_ROOT
 # define CONFIG_BOOTARGS_ROOT "/dev/mtdblock0 rw"
 #endif
+#ifndef FLASHBOOT_ENV_SETTINGS
+# define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20100000\0"
+#endif
 #define CONFIG_BOOTARGS	\
 	"root=" CONFIG_BOOTARGS_ROOT " " \
 	"clkin_hz=" MK_STR(CONFIG_CLKIN_HZ) " " \
@@ -211,7 +214,7 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	NAND_ENV_SETTINGS \
 	NETWORK_ENV_SETTINGS \
-	"flashboot=bootm 0x20100000\0"
+	FLASHBOOT_ENV_SETTINGS
 
 /*
  * Network Settings
diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h
index 3d41bd1..ad1dd12 100644
--- a/include/configs/cm-bf527.h
+++ b/include/configs/cm-bf527.h
@@ -38,6 +38,9 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_120 | CLKBUFOE | FREQ_1000)
+
 
 /*
  * Memory Settings
@@ -105,7 +108,7 @@
 #define CONFIG_ENV_ADDR		0x20008000
 #define CONFIG_ENV_OFFSET	0x8000
 #define CONFIG_ENV_SIZE		0x8000
-#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_SECT_SIZE	0x8000
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 
 
@@ -125,6 +128,10 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+	"flashboot=flread 20040000 1000000 300000;" \
+	"bootm 0x1000000\0"
 
 
 /*
diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h
index 06eb288..7515296 100644
--- a/include/configs/cm-bf533.h
+++ b/include/configs/cm-bf533.h
@@ -38,6 +38,9 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			5
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
+
 
 /*
  * Memory Settings
@@ -93,6 +96,8 @@
  */
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define FLASHBOOT_ENV_SETTINGS	"flashboot=bootm 0x20040000\0"
 
 
 /*
diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
index b243e1a..0d68eba 100644
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@@ -38,6 +38,9 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000)
+
 
 /*
  * Memory Settings
@@ -127,6 +130,10 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+	"flashboot=flread 20040000 1000000 300000;" \
+	"bootm 0x1000000\0"
 
 
 /*
diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
index 0ed5960..c1179b0 100644
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@@ -131,6 +131,10 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+	"flashboot=flread 20040000 1000000 280000;" \
+	"bootm 0x1000000\0"
 
 
 /*
@@ -138,13 +142,4 @@
  */
 #include <configs/bfin_adi_common.h>
 
-#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND	"run flashboot"
-
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	NAND_ENV_SETTINGS \
-	NETWORK_ENV_SETTINGS \
-	"flashboot=flread 20040000 1000000 280000; bootm 0x1000000\0"
-
 #endif
diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h
index 9630f7d..93c4c8d 100644
--- a/include/configs/cm-bf548.h
+++ b/include/configs/cm-bf548.h
@@ -38,6 +38,9 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | GAIN_20 | FREQ_1000)
+
 
 /*
  * Memory Settings
@@ -115,6 +118,8 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	1
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define FLASHBOOT_ENV_SETTINGS	"flashboot=bootm 0x20040000\0"
 
 #ifndef __ADSPBF542__
 /* Don't waste time transferring a logo over the UART */
diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h
index 4a77435..1741ed4 100644
--- a/include/configs/cm-bf561.h
+++ b/include/configs/cm-bf561.h
@@ -30,7 +30,7 @@
 #define CONFIG_PLL_BYPASS		0
 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL		*/
 /* Values can range from 0-63 (where 0 means 64)			*/
-#define CONFIG_VCO_MULT			22
+#define CONFIG_VCO_MULT			20
 /* CCLK_DIV controls the core clock divider				*/
 /* Values can be 1, 2, 4, or 8 ONLY					*/
 #define CONFIG_CCLK_DIV			1
@@ -38,6 +38,9 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			5
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_110 | GAIN_20 | FREQ_1000)
+
 
 /*
  * Memory Settings
@@ -98,6 +101,8 @@
  */
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define FLASHBOOT_ENV_SETTINGS	"flashboot=bootm 0x20040000\0"
 
 
 /*
diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
index 9615ced..5a5fbdd 100644
--- a/include/configs/tcm-bf537.h
+++ b/include/configs/tcm-bf537.h
@@ -38,6 +38,9 @@
 /* Values can range from 1-15						*/
 #define CONFIG_SCLK_DIV			4
 
+/* Decrease core voltage */
+#define CONFIG_VR_CTL_VAL (VLEV_115 | CLKBUFOE | GAIN_20 | FREQ_1000)
+
 
 /*
  * Memory Settings
@@ -128,6 +131,10 @@
 #define CONFIG_MISC_INIT_R
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	0
+#define CONFIG_BOOTCOMMAND	"run flashboot"
+#define FLASHBOOT_ENV_SETTINGS \
+	"flashboot=flread 20040000 1000000 280000;" \
+	"bootm 0x1000000\0"
 
 
 /*
-- 
1.6.6

More information about the U-Boot mailing list